Layer-by-Layer Tissue Microfabrication Supports Cell Proliferation In Vitro and In Vivo
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Layer-by-layer biofabrication represents a novel strategy to create three-dimensional living structures with a controlled internal architecture, using cell micromanipulation technologies. Laser assisted bioprinting (LAB) is an effective printing method for patterning cells, biomolecules, and biomaterials in two dimensions. "Biopapers," made of thin polymer scaffolds, may be appropriate to achieve three-dimensional constructs and to reinforce mechanical properties of printed materials. The aim of this work was to evaluate the effect of the tridimensional organization of cells and biomaterials on cell proliferation in vitro and in vivo. The experimental LAB setup was comprised of an infrared laser, focused onto a glass ribbon coated with an absorbing layer of gold. The cell bioink was made of MG63 cells (50 millions cells/mL in culture medium and 1% alginate), transduced with Luciferase gene for tracking and quantification. The printing substrate was a 100-μm-thick polycaprolacton (PCL) electrospun scaffold. The building sequence comprised sequential layers of cells and PCL scaffolds stacked using two different tridimensional arrangements, which were compared in this study (layer-by-layer vs. seeding on a single locus of the scaffolds). Then the cell-seeded materials were cultured in vitro or implanted in vivo in NOD-SCID mice. The qualitative follow-up involved scanning electron microscopy (SEM) observations, live-dead assays, and histology. The cell amount was quantified by photon imager during 21 days in vitro and 2 months in vivo. Live- dead assay and SEM revealed that the cells survived after printing and spread onto PCL membranes. Circle-shaped patterns were maintained in vitro during the first week but they were no longer observable after 2 weeks, due to cell proliferation. Luciferase tracking displayed that the cell amount was increased in vitro and in vivo when the materials and the cells where stacked layer by layer. Histological sections of the in vivo samples revealed a thicker fibrous tissue in the layer-by-layer samples. We have demonstrated in this study that PCL electrospun biopapers can act as a shock-absorbing mattress for cell printing and could further support cell proliferation. The layer-by-layer printing provided an appropriate 3D environment for cell survival and enhanced cell proliferation in vitro and in vivo.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Oxygen gradients correlate with cell density and cell viability in engineered cardiac tissue
Radisic, M., Malda, J., Epping, E., Geng, W., Langer, R., & Vunjak‐Novakovic, G. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20722 · Cited by 399
Cited by
25th Anniversary Article: Engineering Hydrogels for Biofabrication
Malda, J., Visser, J., Melchels, F. P., Jüngst, T., Hennink, W. E., Dhert, W. J. A., Groll, J., & Hutmacher, D. W. (2013) · Advanced Materials · doi:10.1002/adma.201302042 · Cited by 1,901
3D bioprinting for biomedical devices and tissue engineering: A review of recent trends and advances
Derakhshanfar, S., Mbeleck, R., Xu, K., Zhang, X., Zhong, W., & Xing, M. (2018) · Bioactive Materials · doi:10.1016/j.bioactmat.2017.11.008 · Cited by 1,027
Strategies and Molecular Design Criteria for 3D Printable Hydrogels
Jungst, T., Smolan, W., Schacht, K., Scheibel, T., & Groll, J. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.5b00303 · Cited by 712
Biofabrication of bone tissue: approaches, challenges and translation for bone regeneration
Tang, D., Tare, R. S., Yang, L.-Y., Williams, D. F., Ou, K.-L., & Oreffo, R. O. C. (2016) · Biomaterials · doi:10.1016/j.biomaterials.2016.01.024 · Cited by 613
“The majority of cells survived the printing process when a layer-by-layer assembly was used [36].”
Thermal Inkjet Printing in Tissue Engineering and Regenerative Medicine
Cui, X., Boland, T., D.D'Lima, D., & K. Lotz, M. (2012) · Recent Patents on Drug Delivery & Formulation · doi:10.2174/187221112800672949 · Cited by 581
An Introduction to 3D Bioprinting: Possibilities, Challenges and Future Aspects
Kačarević, Ž. P., Rider, P. M., Alkildani, S., Retnasingh, S., Smeets, R., Jung, O., Ivanišević, Z., & Barbeck, M. (2018) · Materials · doi:10.3390/ma11112199 · Cited by 479
Crosslinking Strategies for 3D Bioprinting of Polymeric Hydrogels
GhavamiNejad, A., Ashammakhi, N., Wu, X. Y., & Khademhosseini, A. (2020) · Small · doi:10.1002/smll.202002931 · Cited by 400
Characterization of printed PLA scaffolds for bone tissue engineering
Grémare, A., Guduric, V., Bareille, R., Heroguez, V., Latour, S., L'heureux, N., Fricain, J., Catros, S., & Le Nihouannen, D. (2018) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36289 · Cited by 362
Self-citationState-of-the-Art Review of 3D Bioprinting for Cardiovascular Tissue Engineering
Duan, B. (2017) · Annals of Biomedical Engineering · doi:10.1007/s10439-016-1607-5 · Cited by 314
An Overview on Materials and Techniques in 3D Bioprinting Toward Biomedical Application
Vanaei, S., Parizi, M. S., Vanaei, S., Salemizadehparizi, F., & Vanaei, H. R. (2021) · Engineered Regeneration · doi:10.1016/j.engreg.2020.12.001 · Cited by 308
Layer by Layer Three-dimensional Tissue Epitaxy by Cell-Laden Hydrogel Droplets
Moon, S., Hasan, S. K., Song, Y. S., Xu, F., Keles, H. O., Manzur, F., Mikkilineni, S., Hong, J. W., Nagatomi, J., Haeggstrom, E., et al. (2010) · Tissue Engineering Part C: Methods · doi:10.1089/ten.tec.2009.0179 · Cited by 305
3D Bioprinting of Human Tissues: Biofabrication, Bioinks, and Bioreactors
Zhang, J., Wehrle, E., Rubert, M., & Müller, R. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22083971 · Cited by 257
Bioprinting and organ-on-chip applications towards personalized medicine for bone diseases
Arrigoni, C., Gilardi, M., Bersini, S., Candrian, C., & Moretti, M. (2017) · Stem Cell Reviews and Reports · doi:10.1007/s12015-017-9741-5 · Cited by 68
Metadata
- Authors
- Catros, S., Guillemot, F., Nandakumar, A., Ziane, S., Moroni, L., Habibovic, P., van Blitterswijk, C., Rousseau, B., Chassande, O., Amédée, J., & Fricain, J.-C.
- Venue
- Tissue Engineering Part C: Methods
- Publisher
- SAGE Publications
- Published
- 2012-01
- Volume
- 18
- Issue
- 1
- Pages
- 62-70
- ISSN
- 1937-3384 (ISSN-L)
- 1937-3392
- OpenAlex
- W2170104218
- Cited by
- 113
- References
- 1
- FWCI
- 4.19
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.