The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Mesoporosity as a new parameter for understanding tension stress generation in trees
Abstract
The mechanism for tree orientation in angiosperms is based on the production of high tensile stress on the upper side of the inclined axis. In many species, the stress level is strongly related to the presence of a peculiar layer, called the G-layer, in the fibre cell wall. The structure of the G-layer has recently been described as a hydrogel thanks to N(2) adsorption-desorption isotherms of supercritically dried samples showing a high mesoporosity (pores size from 2-50 nm). This led us to revisit the concept of the G-layer that had been, until now, only described from anatomical observation. Adsorption isotherms of both normal wood and tension wood have been measured on six tropical species. Measurements show that mesoporosity is high in tension wood with a typical thick G-layer while it is much less with a thinner G-layer, sometimes no more than normal wood. The mesoporosity of tension wood species without a G-layer is as low as in normal wood. Not depending on the amount of pores, the pore size distribution is always centred around 6-12 nm. These results suggest that, among species producing fibres with a G-layer, large structural differences of the G-layer exist between species.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Sing, K. S. W. (1985) · Pure and Applied Chemistry · doi:10.1351/pac198557040603 · Cited by 24,485
Barrett, E. P., Joyner, L. G., & Halenda, P. P. (1951) · Journal of the American Chemical Society · doi:10.1021/ja01145a126 · Cited by 13,172
Adsorption Surface Area and Porosity
Gregg, S. J., Sing, K. S. W., & Salzberg, H. W. (1967) · Journal of The Electrochemical Society · doi:10.1149/1.2426447 · Cited by 9,507
Chemistry of Aerogels and Their Applications
Pierre, A. C., & Pajonk, G. M. (2002) · Chemical Reviews · doi:10.1021/cr0101306 · Cited by 2,239
Reporting Physisorption Data for Gas/Solid Systems
Sing, K. S. W., Everett, D. H., Haul, R. A. W., Moscou, L., Pierotti, R. A., Rouquerol, J., & Siemieniewska, T. (2008) · Handbook of Heterogeneous Catalysis · doi:10.1002/9783527610044.hetcat0065 · Cited by 827
Hydrogel Control of Xylem Hydraulic Resistance in Plants
Zwieniecki, M. A., Melcher, P. J., & Michele Holbrook, N. (2001) · Science · doi:10.1126/science.1057175 · Cited by 516
The Formation of Wood in Forest Trees
(1964) · Elsevier eBooks · doi:10.1016/c2013-0-12178-2 · Cited by 480
Adsorption by Powders and Porous Solids
(2014) · Elsevier eBooks · doi:10.1016/c2010-0-66232-8 · Cited by 411
Aerogel materials from marine polysaccharides
Quignard, F., Valentin, R., & Di Renzo, F. (2008) · New Journal of Chemistry · doi:10.1039/b808218a · Cited by 276
Self-citation
Cited by
Oh, H.-S., Nong, H. N., Reier, T., Gliech, M., & Strasser, P. (2015) · Chemical Science · doi:10.1039/c5sc00518c · Cited by 423
Bae, S., Kim, J., Randriamahazaka, H., Moon, S., Park, J., & Oh, I. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601492 · Cited by 324
Zhang, W., Mao, S., Chen, H., Huang, L., & Qiu, R. (2013) · Bioresource Technology · doi:10.1016/j.biortech.2013.08.082 · Cited by 218
Talukdar, K., Delgado, S., Lagarteira, T., Gazdzicki, P., & Friedrich, K. A. (2019) · Journal of Power Sources · doi:10.1016/j.jpowsour.2019.04.094 · Cited by 68
Metadata
- Authors
- Chang, S.-S., Clair, B., Ruelle, J., Beauchene, J., Di Renzo, F., Quignard, F., Zhao, G.-J., Yamamoto, H., & Gril, J.
- Venue
- Journal of Experimental Botany
- Publisher
- Oxford University Press (OUP)
- Published
- 2009-05-12
- Volume
- 60
- Issue
- 11
- Pages
- 3023-3030
- ISSN
- 0022-0957 (ISSN-L)
- 1460-2431
- OpenAlex
- W2169578870
- Cited by
- 280
- References
- 21
- FWCI
- 11.54
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Mesoporosity as a new parameter for understanding tension stress generation in trees. https://app.cochat.ai/papers/10.1093/jxb/erp133
- The paper
- Chang, S.-S., Clair, B., Ruelle, J., Beauchene, J., Di Renzo, F., Quignard, F., Zhao, G.-J., Yamamoto, H., & Gril, J. (2009). Mesoporosity as a new parameter for understanding tension stress generation in trees. Journal of Experimental Botany. https://doi.org/10.1093/jxb/erp133
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.