3D printing of recombinant collagen/chitosan methacrylate/nanoclay hydrogels loaded with Kartogenin nanoparticles for cartilage regeneration
Open accessThe DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
Cartilage defects are frequently caused by trauma, illness and degradation of the cartilage. If these defects are not sufficiently treated, the joints will degrade irreversibly, possibly resulting in disability. Articular cartilage lacks blood vessels and nerves and is unable to regenerate itself, so the repair of cartilage defects is extremely challenging in clinical treatment. Tissue engineering technology is an emerging technology in cartilage repair and cartilage regeneration. 3D-printed hydrogels show great potential in cartilage tissue engineering for the fabrication of 3D cell culture scaffolds to mimic extracellular matrix. In this study, we construct a 3D-printed hydrogel loaded with nanoparticles by electrostatic interaction and photo cross-linking for the regeneration of cartilage, which has adaptable and drug-continuous release behavior. A photopolymerizable bioink was prepared using recombinant collagen, chitosan, nanoclay Laponite-XLG and nanoparticles loaded with Kartogenin (KGN). This bioink was added with KGN, a small molecule drug that promotes cartilage differentiation, and as a result, the 3D-printed CF/CM/3%LAP/KGN scaffolds obtained by extrusion printing is expected to be used for cartilage repair. It was shown that the 3D-printed scaffolds had good cytocompatibility for human bone marrow mesenchymal stem cells (hBMSCs) and exhibited excellent antimicrobial properties, the continuous release of KGN in the scaffold induced the hBMSCs differentiation into chondrocytes, which significantly enhanced the expression of collagen II and glycosaminoglycan. In vivo studies have shown that implantation of KGN-loaded scaffolds into cartilage-injured tissues promoted cartilage tissue regeneration. This study demonstrated that 3D-printed CF/CM/3%LAP/KGN scaffolds can be used for cartilage repair, which is expected to lead to new healing opportunities for cartilage injury-based diseases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“ECM hydrogels exhibit shear-thinning properties, making them suitable for minimally invasive delivery, 3D bioprinting, or coating surfaces to promote tissue regeneration.”
From Constructing biomimetic microenvironments for liver regeneration (2025) · doi:10.1186/s12951-025-03729-9 · cites this paper as [152]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149 · cited 1×
“Chitosan has a wide range of applications in 3D printing due to its favorable properties [13], including biodegradability, non-toxicity, biocompatibility, antimicrobial properties [14, 15].”
BackgroundRepair and tissue engineering techniques for articular cartilage
Makris, E. A., Gomoll, A. H., Malizos, K. N., Hu, J. C., & Athanasiou, K. A. (2015) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2014.157 · Cited by 1,245 · cited 1×
“These markers play a critical role in the development, formation and maintenance of cartilage tissue [52].”
BackgroundBiodegradable microspheres for protein delivery
Sinha, V. R., & Trehan, A. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(03)00194-9 · Cited by 814 · cited 1×
“By modifying the CBF-β /Runx1 signaling pathway, it promotes the differentiation of mesenchymal stem cells (MSCs) into cartilage and shields it from damage [23, 24].”
BackgroundA Stem Cell–Based Approach to Cartilage Repair
Johnson, K., Zhu, S., Tremblay, M. S., Payette, J. N., Wang, J., Bouchez, L. C., Meeusen, S., Althage, A., Cho, C. Y., Wu, X., et al. (2012) · Science · doi:10.1126/science.1215157 · Cited by 796
Surgical and tissue engineering strategies for articular cartilage and meniscus repair
Kwon, H., Brown, W. E., Lee, C. A., Wang, D., Paschos, N., Hu, J. C., & Athanasiou, K. A. (2019) · Nature Reviews Rheumatology · doi:10.1038/s41584-019-0255-1 · Cited by 652
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600 · cited 1×
“Furthermore, the embedded nanoparticles may interfere with the physical crosslinking between polymers, leading to a decrease in compressive strength [36].”
BackgroundBioactive Silicate Nanoplatelets for Osteogenic Differentiation of Human Mesenchymal Stem Cells
Gaharwar, A. K., Mihaila, S. M., Swami, A., Patel, A., Sant, S., Reis, R. L., Marques, A. P., Gomes, M. E., & Khademhosseini, A. (2013) · Advanced Materials · doi:10.1002/adma.201300584 · Cited by 520 · cited 1×
“Studies have indicated that LAP concentrations below 1mg/ml are non-toxic to human MSCs [42].”
BackgroundBosnakovski, D., Mizuno, M., Kim, G., Takagi, S., Okumura, M., & Fujinaga, T. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20828 · Cited by 502
Collagen‐based biomaterials for biomedical applications
Rezvani Ghomi, E., Nourbakhsh, N., Akbari Kenari, M., Zare, M., & Ramakrishna, S. (2021) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34881 · Cited by 406
Scaffolds based bone tissue engineering: the role of chitosan
Costa-Pinto, A. R., Reis, R. L., & Neves, N. M. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0704 · Cited by 355 · cited 1×
“Chitosan is a biodegradable natural biomaterial containing a large number of amino and carboxyl groups, which has a structure similar to glycosaminoglycans (GAG, a component of ECM) and facilitates cell adhesion [12].”
Background
Cited by
Design and Application of Stimuli‐Responsive Nanocomposite Hydrogels: A Review
Guo, X., Liu, H., Nail, A., Meng, D., Zhu, L., Li, C., & Li, H. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202401095 · Cited by 42
He, H., Ye, M., Cui, G., & Xiao, J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102452 · Cited by 27
“…composed of recombinant collagen, chitosan, nanoscale Laponite-XLG clay, and kartogenin (KGN)-loaded nanoparticles, enabled sustained KGN release and significantly enhanced hBMSC chondro-genesis, thereby supporting cartilage regeneration and functional restoration of defect sites [226] (Fig.”
Quantitative Assessment of Hydrogel Printability in Extrusion Bioprinting
Yu, S., Luo, Y., Chen, S., Fan, J., & Zhang, H. (2026) · Gels · doi:10.3390/gels12030189 · Cited by 18
Poly-lysine-modified recombinant protein nanocages for effective delivery of small activating RNA
Xu, L., Li, S., Wan, S., Liu, Z., Zhong, Y., Qian, X., Qin, J., Cai, L., & Huang, H. (2025) · Journal of Controlled Release · doi:10.1016/j.jconrel.2025.113638 · Cited by 15
Construction of organoids using bioprinting technology: a frontier exploration of cartilage repair
Huang, J., Jia, S., Liang, R., Li, A., Li, L., Wang, H., Chen, J., Tang, H., Zhang, X., Lin, J., et al. (2025) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2025.06.020 · Cited by 17
“Untreated, this wear can cause irreversible joint degeneration and disability [35].”
Lia, L., Shi, G., Wu, Z., Cai, Z., Wang, J., Hao, Z., Chen, R., Piao, Z., Chen, C., & Li, J. (2025) · Chemical Engineering Journal · doi:10.1016/j.cej.2025.165273 · Cited by 12
Constructing biomimetic microenvironments for liver regeneration
(2025) · doi:10.1186/s12951-025-03729-9 · Cited by 11
Zheng, Z., Xie, J., Zeng, J., Kang, Z., Liu, Z., Qi, M., Yu, C., & Wei, H. (2026) · Regenerative Biomaterials · doi:10.1093/rb/rbag009 · Cited by 11
Yin, X., Li, J., & Fan, C. (2025) · Bioactive Materials · doi:10.1016/j.bioactmat.2025.12.043 · Cited by 15
“Zhang et al. [219] developed a photo-crosslinked, 3D-printed hydrogel composed of recombinant collagen, chitosan, nanoscale clay (Laponite-XLG), and KGN-loaded nanoparticles, which sustained the differentiation of human BMSCs into chondrocytes and significantly upregulated the expression of type II…”
Bakhshi, A., Bakhshi, M., Zandsalimi, K., Hosseine, M., Shirazi, M. R. D., & Naghib, S. M. (2025) · Materials Science and Engineering R Reports · doi:10.1016/j.mser.2025.101149 · Cited by 7
Fabrication of collagen-based biomaterials for sports medicine application
Jiang, B., Zhou, Z., Yu, C., Li, H., Li, S., Hua, C., Huang, R., Xia, Z., Kong, B., & Chen, J. (2025) · Regenerative Biomaterials · doi:10.1093/rb/rbaf116 · Cited by 6
3D Printing‐Based Polymer Nanocomposites for Cancer Treatment: Innovations and Perspectives
Mousavi, S. M., Kalashgrani, M. Y., Rahmanian, V., Barangizi, H., Mahmoudi, Z., Karganroudi, S. S., Rao, N. V., & Chiang, W. (2025) · The Chemical Record · doi:10.1002/tcr.202500120 · Cited by 6
Nanoclay‐Engineered Scaffolds for the Controlled Delivery of Biomolecules in Regenerative Medicine
Shadi, M., Vafaei‐Nezhad, S., & Ahangar, A. G. (2026) · Asia-Pacific Journal of Chemical Engineering · doi:10.1002/apj.70229 · Cited by 6
Atia, G. A. N., ALI, M. A. M., Abdeen, A., Alghonemy, W. Y., Aborayah, N. H., Gebba, M. A., Amer, R. Z., Attia, S. S., Mohamed, M. E., Hetta, H. F., et al. (2026) · Journal of Drug Delivery Science and Technology · doi:10.1016/j.jddst.2026.108141 · Cited by 6
Natural source protein hydrogels: Emerging materials for sports injury management and protection
Zhang, H., Gao, X., Wang, Y., Wu, J. J., Zhang, H., Jiang, M., Wang, W., & Yan, C. (2025) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2025.147887 · Cited by 4
Kusnadi, Herdiana, Y., Rochima, E., Joni, I. M., Putra, O. N., Gazzali, A. M., & Muchtaridi, M. (2026) · Nanotechnology Science and Applications · doi:10.2147/nsa.s563394 · Cited by 3
Sun, H., Xu, Z., Liu, C. P., Dashti, M. D., Hu, J., Sun, J., Boccaccini, A. R., Stevanović, M. M., Filipović, N., Zheng, K., et al. (2026) · Advanced Healthcare Materials · doi:10.1002/adhm.202505941 · Cited by 3
Yu, T., Yang, X., Zhang, X., Zhu, C., Zhao, J., Yang, Y., & Jiang, M. (2025) · Gels · doi:10.3390/gels11120977 · Cited by 2
“It directly affects the structural integrity of the product and is closely related to the adhesion and proliferation of cells [42,43].”
Advancing Arthritis Therapy: The Frontier of Targeted and Responsive Nanomedicine
Zha, D., Li, G., Jin, X., & Zhang, X. (2026) · International Journal of Nanomedicine · doi:10.2147/ijn.s598968 · Cited by 2
Li, W., Shi, K., Mi, Y., Zhao, J., Yao, T., & Ma, P. (2025) · Biotechnology and Bioengineering · doi:10.1002/bit.70114 · Cited by 1
“A universal tensile testing equipment (Reger RGM 6030, China) was used to assess the mechanical tensile characteristics of the artificial blood vessels.”
InfluentialSelf-citationLiu, Z., Pei, J., Sheng, Y., Niu, T., Wu, P., Liu, Y., & Fu, K. (2026) · ACS Applied Bio Materials · doi:10.1021/acsabm.5c02113 · Cited by 1
Zhu, C., Zhang, X., Shao, Z., Chang, B., Wang, Y., Sun, L., Yang, Y., Ding, X., & Zhang, W. (2026) · Biomaterials Advances · doi:10.1016/j.bioadv.2026.214896 · Cited by 1
Self-citationHigh-SiO2 hydrogels with intrinsic antifreeze, superior strength, and wear resistance
Hong, Y., Chen, J., Yao, D., Gao, X., Lu, C., & Pang, X. (2026) · Polymer · doi:10.1016/j.polymer.2026.129756
Wang, T., Han, Y., Chen, J., Zhou, G., Cai, L., Li, T., Guo, X., & Han, J. (2026) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2026.127089
Khoirunnisa, S. H., Purniawan, A., Ardhyananta, H., & Rasyida, A. (2026) · South African Journal of Chemical Engineering · doi:10.1016/j.sajce.2026.100932
Khoshnood, N., Frampton, J. P., Nouri, A., & Zamanian, A. (2026) · Cellular and Molecular Bioengineering · doi:10.1007/s12195-026-00926-w
Li, Y., Wang, J., Ding, Y., Yang, X. X., Zhang, S., Yang, G., Zhu, C., Wang, P., Ma, X., Liu, Y. L., et al. (2026) · Biomaterials · doi:10.1016/j.biomaterials.2026.124470
Self-citationLatest advances and frontier applications of engineered cartilage organoids
Chen, X., Lu, M., Xu, L., Zheng, G., Yu, W., Zhang, Q., Liu, Z., Harada, R., & Xie, H. (2026) · Biomedical Technology · doi:10.1016/j.bmt.2026.100169
胡伟华, Chen, J., Yu, F., Yu, G., Li, K., 陳智龍, Wang, Y., Li, Z., Hu, Y., Cheng, Z., et al. (2026) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6c00928
Metadata
- Authors
- Zhang, W., Shi, K., Yang, J., Li, W., Yu, Y., Mi, Y., Yao, T., Ma, P., & Fan, D.
- Affiliations
- Northwest University (CN)
- Engineering Research Center of Western Resource Innovation Medicine Green Manufacturing, Ministry of Education, School of Chemical Engineering, Northwest University , Xi’an 710069, China
- Corresponding author
- Yao, Tianyu
- Ma, Pei
- Fan, Daidi
- Venue
- Regenerative Biomaterials
- Publisher
- Oxford University Press (OUP)
- Published
- 2024
- Volume
- 11
- Pages
- rbae097-rbae097
- ISSN
- 2056-3418 (ISSN-L)
- 2056-3426
- PMC
- PMC11364519
- OpenAlex
- W4401937287
- Cited by
- 29
- References
- 54
- Citations by year
- 2026: 16 · 2025: 13
- FWCI
- 3.18
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Regenerative Biomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- National Key R&D Program of China (2022YFC2104800)
- National Natural Science Foundation of China (22208264)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Rheumatology › Osteoarthritis Treatment and Mechanisms
- Keywords
- cartilage regeneration, 3D bioprinting, recombinant collagen, nanoclay, Laponite, kartogenin, extrusion printing, drug-loaded hydrogels, sustained drug release, bone marrow mesenchymal stem cells, chondrogenic differentiation, antimicrobial scaffolds, cartilage defects, tissue engineering scaffolds
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.