3D printing of recombinant collagen/chitosan methacrylate/nanoclay hydrogels loaded with Kartogenin nanoparticles for cartilage regeneration
Open accessThe DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index.
Abstract
Cartilage defects are frequently caused by trauma, illness and degradation of the cartilage. If these defects are not sufficiently treated, the joints will degrade irreversibly, possibly resulting in disability. Articular cartilage lacks blood vessels and nerves and is unable to regenerate itself, so the repair of cartilage defects is extremely challenging in clinical treatment. Tissue engineering technology is an emerging technology in cartilage repair and cartilage regeneration. 3D-printed hydrogels show great potential in cartilage tissue engineering for the fabrication of 3D cell culture scaffolds to mimic extracellular matrix. In this study, we construct a 3D-printed hydrogel loaded with nanoparticles by electrostatic interaction and photo cross-linking for the regeneration of cartilage, which has adaptable and drug-continuous release behavior. A photopolymerizable bioink was prepared using recombinant collagen, chitosan, nanoclay Laponite-XLG and nanoparticles loaded with Kartogenin (KGN). This bioink was added with KGN, a small molecule drug that promotes cartilage differentiation, and as a result, the 3D-printed CF/CM/3%LAP/KGN scaffolds obtained by extrusion printing is expected to be used for cartilage repair. It was shown that the 3D-printed scaffolds had good cytocompatibility for human bone marrow mesenchymal stem cells (hBMSCs) and exhibited excellent antimicrobial properties, the continuous release of KGN in the scaffold induced the hBMSCs differentiation into chondrocytes, which significantly enhanced the expression of collagen II and glycosaminoglycan. In vivo studies have shown that implantation of KGN-loaded scaffolds into cartilage-injured tissues promoted cartilage tissue regeneration. This study demonstrated that 3D-printed CF/CM/3%LAP/KGN scaffolds can be used for cartilage repair, which is expected to lead to new healing opportunities for cartilage injury-based diseases.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures








Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“ECM hydrogels exhibit shear-thinning properties, making them suitable for minimally invasive delivery, 3D bioprinting, or coating surfaces to promote tissue regeneration.”
From Constructing biomimetic microenvironments for liver regeneration (2025) · doi:10.1186/s12951-025-03729-9 · cites this paper as [152]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Chitosan-based biomaterials for tissue engineering
Croisier, F., & Jérôme, C. (2013) · European Polymer Journal · doi:10.1016/j.eurpolymj.2012.12.009 · Cited by 2,149 · cited 1×
“Chitosan has a wide range of applications in 3D printing due to its favorable properties [13], including biodegradability, non-toxicity, biocompatibility, antimicrobial properties [14, 15].”
BackgroundRepair and tissue engineering techniques for articular cartilage
Makris, E. A., Gomoll, A. H., Malizos, K. N., Hu, J. C., & Athanasiou, K. A. (2015) · Nature Reviews Rheumatology · doi:10.1038/nrrheum.2014.157 · Cited by 1,245 · cited 1×
“These markers play a critical role in the development, formation and maintenance of cartilage tissue [52].”
BackgroundBiodegradable microspheres for protein delivery
Sinha, V. R., & Trehan, A. (2003) · Journal of Controlled Release · doi:10.1016/s0168-3659(03)00194-9 · Cited by 814 · cited 1×
“By modifying the CBF-β /Runx1 signaling pathway, it promotes the differentiation of mesenchymal stem cells (MSCs) into cartilage and shields it from damage [23, 24].”
BackgroundA Stem Cell–Based Approach to Cartilage Repair
Johnson, K., Zhu, S., Tremblay, M. S., Payette, J. N., Wang, J., Bouchez, L. C., Meeusen, S., Althage, A., Cho, C. Y., Wu, X., et al. (2012) · Science · doi:10.1126/science.1215157 · Cited by 796
Surgical and tissue engineering strategies for articular cartilage and meniscus repair
Kwon, H., Brown, W. E., Lee, C. A., Wang, D., Paschos, N., Hu, J. C., & Athanasiou, K. A. (2019) · Nature Reviews Rheumatology · doi:10.1038/s41584-019-0255-1 · Cited by 652
Hydrogel Bioink Reinforcement for Additive Manufacturing: A Focused Review of Emerging Strategies
Chimene, D., Kaunas, R., & Gaharwar, A. K. (2020) · Advanced Materials · doi:10.1002/adma.201902026 · Cited by 600 · cited 1×
“Furthermore, the embedded nanoparticles may interfere with the physical crosslinking between polymers, leading to a decrease in compressive strength [36].”
BackgroundBioactive Silicate Nanoplatelets for Osteogenic Differentiation of Human Mesenchymal Stem Cells
Gaharwar, A. K., Mihaila, S. M., Swami, A., Patel, A., Sant, S., Reis, R. L., Marques, A. P., Gomes, M. E., & Khademhosseini, A. (2013) · Advanced Materials · doi:10.1002/adma.201300584 · Cited by 520 · cited 1×
“Studies have indicated that LAP concentrations below 1mg/ml are non-toxic to human MSCs [42].”
BackgroundBosnakovski, D., Mizuno, M., Kim, G., Takagi, S., Okumura, M., & Fujinaga, T. (2006) · Biotechnology and Bioengineering · doi:10.1002/bit.20828 · Cited by 502
Collagen‐based biomaterials for biomedical applications
Rezvani Ghomi, E., Nourbakhsh, N., Akbari Kenari, M., Zare, M., & Ramakrishna, S. (2021) · Journal of Biomedical Materials Research Part B: Applied Biomaterials · doi:10.1002/jbm.b.34881 · Cited by 406
Scaffolds based bone tissue engineering: the role of chitosan
Costa-Pinto, A. R., Reis, R. L., & Neves, N. M. (2011) · Tissue Engineering Part B Reviews · doi:10.1089/ten.teb.2010.0704 · Cited by 355 · cited 1×
“Chitosan is a biodegradable natural biomaterial containing a large number of amino and carboxyl groups, which has a structure similar to glycosaminoglycans (GAG, a component of ECM) and facilitates cell adhesion [12].”
BackgroundArticular cartilage and osteochondral tissue engineering techniques: Recent advances and challenges
Wei, W., & Dai, H. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.05.011 · Cited by 327 · cited 1×
“The hydrogel incorporating recombinant collagen and chitosan creates a microenvironment that closely resembles the ECM, thereby facilitating directed migration of bone marrow MSCs (BMSCs) and enhancing their recruitment and adhesion [45].”
BackgroundLaponite®: A key nanoplatform for biomedical applications?
Tomás, H., Alves, C. S., & Rodrigues, J. (2018) · Nanomedicine: Nanotechnology, Biology and Medicine · doi:10.1016/j.nano.2017.04.016 · Cited by 319 · cited 1×
“LAP contains trace amounts of heavy metals with low toxic effects [41].”
BackgroundHe, X., Liu, X., Yang, J., Du, H., Chai, N., Sha, Z., Geng, M., Zhou, X., & He, C. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.116689 · Cited by 272 · cited 1×
“When Xi et al. [47] added ChMA to the hydrogel, it showed remarkable antibacterial activity against E.coli and Staphylococcus aureus .”
BackgroundA review on chitosan centred scaffolds and their applications in tissue engineering
Ahmed, S., Annu, Ali, A., & Sheikh, J. (2018) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2018.04.176 · Cited by 264 · cited 1×
“Chitosan has a wide range of applications in 3D printing due to its favorable properties [13], including biodegradability, non-toxicity, biocompatibility, antimicrobial properties [14, 15].”
BackgroundPhoto-Cross-Linked Scaffold with Kartogenin-Encapsulated Nanoparticles for Cartilage Regeneration
Shi, D., Xu, X., Ye, Y., Song, K., Cheng, Y., Di, J., Hu, Q., Li, J., Ju, H., Jiang, Q., et al. (2016) · ACS Nano · doi:10.1021/acsnano.5b06663 · Cited by 262 · cited 2×
“It has been shown that the incorporation of nanoparticles encapsulated with KGN in scaffolds can enable targeted drug delivery and thus promote cartilage regeneration [29, 30].”
BackgroundMethodXu, J., Feng, Q., Lin, S., Yuan, W., Li, R., Li, J., Wei, K., Chen, X., Zhang, K., Yang, Y., et al. (2019) · Biomaterials · doi:10.1016/j.biomaterials.2019.04.031 · Cited by 241 · cited 1×
“By modifying the CBF-β /Runx1 signaling pathway, it promotes the differentiation of mesenchymal stem cells (MSCs) into cartilage and shields it from damage [23, 24].”
BackgroundMultifunctional 3D-Printed Wound Dressings
Alizadehgiashi, M., Nemr, C. R., Chekini, M., Pinto Ramos, D., Mittal, N., Ahmed, S. U., Khuu, N., Kelley, S. O., & Kumacheva, E. (2021) · ACS Nano · doi:10.1021/acsnano.1c04499 · Cited by 232 · cited 1×
“Numerous studies have provided evidence of ChMA’s favorable biocompatibility [31, 39, 40].”
BackgroundDLP printing photocurable chitosan to build bio-constructs for tissue engineering
Shen, Y., Tang, H., Huang, X., Hang, R., Zhang, X., Wang, Y., & Yao, X. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.115970 · Cited by 191 · cited 2×
“ChMA was obtained by modifying chitosan using methacrylated anhydride in the following experimental steps [31]: 1g (0.0062mol) of chitosan powder was dissolved in 2% (v/v) aqueous acetic acid solution and stirred for 12h at room temperature to obtain chitosan solution (2wt%).”
BackgroundMethodLi, B., Wang, L., Xu, F., Gang, X., Demirci, U., Wei, D., Li, Y., Feng, Y., Jia, D., & Zhou, Y. (2015) · Acta Biomaterialia · doi:10.1016/j.actbio.2015.04.026 · Cited by 182 · cited 1×
“Chitosan has a wide range of applications in 3D printing due to its favorable properties [13], including biodegradability, non-toxicity, biocompatibility, antimicrobial properties [14, 15].”
BackgroundOsi, A. R., Zhang, H., Chen, J., Zhou, Y., Wang, R., Fu, J., Müller‐Buschbaum, P., & Zhong, Q. (2021) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.1c01321 · Cited by 162 · cited 2×
“The printability of a biomaterial refers to its ability to enable continuous and smooth flow of ink through the nozzle, allowing for the formation of regular and stable filaments during deposition and solidification [34].”
BackgroundTeoh, J. H., Mozhi, A., Sunil, V., Tay, S. M., Fuh, J. Y. H., & Wang, C. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202105932 · Cited by 152 · cited 1×
“Numerous studies have provided evidence of ChMA’s favorable biocompatibility [31, 39, 40].”
BackgroundBasu, S., Pacelli, S., Feng, Y., Lu, Q., Wang, J., & Paul, A. (2018) · ACS Nano · doi:10.1021/acsnano.8b02434 · Cited by 138 · cited 2×
“Researchers often incorporate LAP as a rheology modifier into bioinks [19, 20], thereby improving the printability of bioinks [17].”
BackgroundAtoufi, Z., Kamrava, S. K., Davachi, S. M., Hassanabadi, M., Saeedi Garakani, S., Alizadeh, R., Farhadi, M., Tavakol, S., Bagher, Z., & Hashemi Motlagh, G. (2019) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2019.08.101 · Cited by 129 · cited 1×
“In order to achieve drug release, polymers have been widely employed as drug carriers in drug delivery [25– 27].”
Chen, H., Malheiro, A., van Blitterswijk, C., Mota, C., Wieringa, P. A., & Moroni, L. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.7b07151 · Cited by 118
A Novel Human-Like Collagen Hydrogel Scaffold with Porous Structure and Sponge-Like Properties
Song, X., Zhu, C., Fan, D., Mi, Y., Li, X., Fu, R., Duan, Z., Wang, Y., & Feng, R. (2017) · Polymers · doi:10.3390/polym9120638 · Cited by 116 · cited 2×
“Additionally, previous studies have demonstrated favorable adhesion and proliferation morphology of chondrocytes on CF-1552 hydrogels [38].”
BackgroundSelf-citationLuo, Y., Zhang, T., & Lin, X. (2021) · Chemical Engineering Journal · doi:10.1016/j.cej.2021.132926 · Cited by 113
Synthesis and characterization of collagen/PLGA biodegradable skin scaffold fibers
Sadeghi-Avalshahr, A., Nokhasteh, S., Molavi, A. M., Khorsand-Ghayeni, M., & Shahri, M. M. (2017) · Regenerative Biomaterials · doi:10.1093/rb/rbx026 · Cited by 110
Stuart, K., & Panitch, A. (2008) · Biopolymers · doi:10.1002/bip.21024 · Cited by 100 · cited 1×
“During chondrogenesis, hBMSCs produced fibrous ECM proteins and GAG, with Col II accounting for 90–95% of the collagen produced by chondrocytes in the ECM [50], and GAG is essential for articular cartilage weight-bearing [51].”
BackgroundAndreas, K., Zehbe, R., Kazubek, M., Grzeschik, K., Sternberg, N., Bäumler, H., Schubert, H., Sittinger, M., & Ringe, J. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.12.014 · Cited by 96 · cited 1×
“Furthermore, due to the ionization of carboxyl end groups on PLGA and the adsorption of anions in PVA, KGN@PLGA nanoparticles possess a negative surface charge [30, 37].”
BackgroundStem cell secretome-rich nanoclay hydrogel: a dual action therapy for cardiovascular regeneration
Waters, R., Pacelli, S., Maloney, R., Medhi, I., Ahmed, R. P. H., & Paul, A. (2016) · Nanoscale · doi:10.1039/c5nr07806g · Cited by 93 · cited 1×
“LAPONITE ® XLG nanosilicate (LAP, Na þ 0 : 7 [(Mg 5.5 Li 0.3 )Si − 8 O 20 (OH) 4 ] 0.7 − ) is a disc-shaped 2D nanoclay particle with a thickness of 1–2nm, which has positively charged edges and negatively charged surfaces [16].”
BackgroundInfluentialBergholt, N. L., Lysdahl, H., Lind, M., & Foldager, C. B. (2018) · Cartilage · doi:10.1177/1947603518764262 · Cited by 90 · cited 1×
“Toluidine blue is a cationic dye that exhibits high affinity for sulfate groups present in proteoglycans, it can be used to assess the content of proteoglycans secreted during cartilage differentiation [49].”
BackgroundLi, S., Li, X., Xu, Y., Fan, C., Li, Z. A., Zheng, L., Luo, B., Li, Z., Lin, B., Zha, Z., et al. (2023) · Bioactive Materials · doi:10.1016/j.bioactmat.2023.09.012 · Cited by 86 · cited 1×
“This could be attributed to the impact of incorporating KGN nanoparticles on the degree of photocrosslinking [35].”
BackgroundZhu, Y., Tan, J., Zhu, H., Lin, G., Yin, F., Wang, L., Song, K., Wang, Y., Zhou, G., & Yi, W. (2017) · Biomaterials Science · doi:10.1039/c7bm00001d · Cited by 85 · cited 1×
“In addition to inducing stem cell differentiation into cartilage, KGN has been demonstrated to promote the proliferation of hBMSCs by activating the AMPK-SIRT1 signaling pathway [43, 44].”
BackgroundApplications of chitosan-based biomaterials: a focus on dependent antimicrobial properties
Deng, Z., Wang, T., Chen, X., & Liu, Y. (2020) · Marine Life Science & Technology · doi:10.1007/s42995-020-00044-0 · Cited by 82 · cited 1×
“This disruption of the bacterial membrane results in cytoplasmic leaking, which in turn causes bacterial lysis and death [48].”
BackgroundBordbar, S., Lotfibakhshaiesh, N., Khanmohammadi, M., Sayahpour, F. A., Alini, M., & Eslaminejad, M. B. (2020) · Journal of Biomedical Materials Research Part A · doi:10.1002/jbm.a.36871 · Cited by 77 · cited 1×
“In order to achieve drug release, polymers have been widely employed as drug carriers in drug delivery [25– 27].”
Liu, B., Li, J., Lei, X., Miao, S., Zhang, S., Cheng, P., Song, Y., Wu, H., Gao, Y., Bi, L., et al. (2020) · RSC Advances · doi:10.1039/d0ra03040f · Cited by 75 · cited 2×
“Furthermore, LAP is an FDA-approved material that is generally regarded as safe for biomedical application [19].”
BackgroundLi, W., Miao, W., Liu, Y., Wang, T., Zhang, Y., Wang, W., Lu, D., Zhou, X., Jiao, X., Jia, X., et al. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202109871 · Cited by 73 · cited 1×
“Therefore, chitosan with a positive charge can interact with the negatively charged surface of LAP through electrostatic interactions, leading to binding between them [18].”
BackgroundSelf-citationDong, Y., Liu, Y., Chen, Y., Sun, X., Zhang, L., Zhang, Z., Wang, Y., Qi, C., Wang, S., & Yang, Q. (2021) · NPG Asia Materials · doi:10.1038/s41427-021-00339-3 · Cited by 56 · cited 1×
“Dong et al. [32] investigated the release behavior of PLGA-loaded KGN at concentrations of 1, 10 and 100 μ M, as well as the mechanical properties of the hydrogel.”
BackgroundO'Shea, D. G., Hodgkinson, T., Curtin, C. M., & O’Brien, F. J. (2023) · Biofabrication · doi:10.1088/1758-5090/ad047a · Cited by 55
Subedi, G., Shrestha, A. K., & Shakya, S. (2016) · Open Pharmaceutical Sciences Journal · doi:10.2174/1874844901603010182 · Cited by 49 · cited 1×
“Solvent evaporation is one of the most commonly used meth-ods to prepare drug-loaded polymer particles, which prevents drug degradation during encapsulation and thus increases the drug-loading capacity [28].”
BackgroundAsgari, N., Bagheri, F., Eslaminejad, M. B., Ghanian, M. H., Sayahpour, F. A., & Ghafari, A. M. (2020) · Stem Cell Research & Therapy · doi:10.1186/s13287-020-01797-2 · Cited by 49
Ono, Y., Ishizuka, S., Knudson, C. B., & Knudson, W. (2014) · Cartilage · doi:10.1177/1947603514528354 · Cited by 48 · cited 1×
“Johnson et al. [21, 22] made the initial discovery of the small molecular chemical known as Kartogenin (KGN).”
BackgroundWang, Y., Chen, G., Yan, J., Chen, X., He, F., Zhu, C., Zhang, J., Lin, J., Pan, G., Yu, J., et al. (2018) · Oxidative Medicine and Cellular Longevity · doi:10.1155/2018/1368142 · Cited by 44 · cited 1×
“In addition to inducing stem cell differentiation into cartilage, KGN has been demonstrated to promote the proliferation of hBMSCs by activating the AMPK-SIRT1 signaling pathway [43, 44].”
BackgroundChen, C., Huang, S., Chen, Z., Liu, Q., Cai, Y., Mei, Y., Xu, Y., Guo, R., & Yan, C. (2022) · Bioengineering & Translational Medicine · doi:10.1002/btm2.10364 · Cited by 41 · cited 1×
“Chen et al. [53] found that the expression of ACAN, Sox9 and collagen II, which are markers of cartilage formation, was significantly enhanced in hydrogels containing KGN.”
BackgroundAzadbakht, A., Alizadeh, S., Ahovan, Z. A., Khosrowpour, Z., Majidi, M., Pakzad, S., Shojaei, S., Chauhan, N. P. S., Jafari, M., & Gholipourmalekabadi, M. (2022) · Macromolecular Bioscience · doi:10.1002/mabi.202200386 · Cited by 41 · cited 1×
“Prior research has demonstrated that hydrogels based on chitosan exhibit inherent antibacterial properties [46].”
BackgroundHua, X., Fan, D., Luo, Y., Zhang, X., Shi, H., Mi, Y., Ma, X., Shang, L., & Zhao, G. (2006) · Chinese Journal of Chemical Engineering · doi:10.1016/s1004-9541(06)60065-7 · Cited by 40
Self-citationSun, X., Wang, J., Wang, Y., & Zhang, Q. (2017) · Artificial Cells Nanomedicine and Biotechnology · doi:10.1080/21691401.2017.1397000 · Cited by 38 · cited 2×
“It has been shown that the incorporation of nanoparticles encapsulated with KGN in scaffolds can enable targeted drug delivery and thus promote cartilage regeneration [29, 30].”
Background3D Bioprinting of Artificial Tissues: Construction of Biomimetic Microstructures
Luo, Y., Lin, X., & Huang, P. (2018) · Macromolecular Bioscience · doi:10.1002/mabi.201800034 · Cited by 33
Jin, Y., Chai, W., & Huang, Y. H. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b09177 · Cited by 32 · cited 1×
“Researchers often incorporate LAP as a rheology modifier into bioinks [19, 20], thereby improving the printability of bioinks [17].”
BackgroundA biomimetic bi-layered tissue engineering scaffolds for osteochondral defects repair
Liu, K., Liu, Y., Duan, Z., Ma, X., & Fan, D. (2020) · Science China Technological Sciences · doi:10.1007/s11431-020-1597-4 · Cited by 25 · cited 1×
“Several studies have been reported on the use of CF-1552 for cartilage re-generation [10, 11].”
BackgroundSelf-citationLiu, J., Lu, Y., Xing, F., Liang, J., Wang, Q., Fan, Y., & Zhang, X. (2021) · Journal of Materials Chemistry B · doi:10.1039/d0tb02616f · Cited by 22
Xie, J., & Fan, D. (2019) · International Journal of Polymeric Materials · doi:10.1080/00914037.2019.1631824 · Cited by 20 · cited 1×
“Several studies have been reported on the use of CF-1552 for cartilage re-generation [10, 11].”
BackgroundSelf-citationWill Tissue-Engineering Strategies Bring New Hope for the Reconstruction of Nasal Septal Cartilage?
Bagher, Z., Asgari, N., Bozorgmehr, P., Kamrava, S. K., Alizadeh, R., & Seifalian, A. M. (2019) · Current Stem Cell Research & Therapy · doi:10.2174/1574888x14666191212160757 · Cited by 19
Chi, L., Fan, D., Ma, X., Mi, Y., Luo, Y., Zhu, C., Zhu, X., & Xue, W. (2011) · Biotechnology and Applied Biochemistry · doi:10.1002/bab.25 · Cited by 14
Self-citation
Cited by
Design and Application of Stimuli‐Responsive Nanocomposite Hydrogels: A Review
Guo, X., Liu, H., Nail, A., Meng, D., Zhu, L., Li, C., & Li, H. (2025) · Macromolecular Rapid Communications · doi:10.1002/marc.202401095 · Cited by 42
He, H., Ye, M., Cui, G., & Xiao, J. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.102452 · Cited by 27
“…composed of recombinant collagen, chitosan, nanoscale Laponite-XLG clay, and kartogenin (KGN)-loaded nanoparticles, enabled sustained KGN release and significantly enhanced hBMSC chondro-genesis, thereby supporting cartilage regeneration and functional restoration of defect sites [226] (Fig.”
Quantitative Assessment of Hydrogel Printability in Extrusion Bioprinting
Yu, S., Luo, Y., Chen, S., Fan, J., & Zhang, H. (2026) · Gels · doi:10.3390/gels12030189 · Cited by 18
Poly-lysine-modified recombinant protein nanocages for effective delivery of small activating RNA
Xu, L., Li, S., Wan, S., Liu, Z., Zhong, Y., Qian, X., Qin, J., Cai, L., & Huang, H. (2025) · Journal of Controlled Release · doi:10.1016/j.jconrel.2025.113638 · Cited by 15
Construction of organoids using bioprinting technology: a frontier exploration of cartilage repair
Huang, J., Jia, S., Liang, R., Li, A., Li, L., Wang, H., Chen, J., Tang, H., Zhang, X., Lin, J., et al. (2025) · Journal of Orthopaedic Translation · doi:10.1016/j.jot.2025.06.020 · Cited by 17
“Untreated, this wear can cause irreversible joint degeneration and disability [35].”
Metadata
- Authors
- Zhang, W., Shi, K., Yang, J., Li, W., Yu, Y., Mi, Y., Yao, T., Ma, P., & Fan, D.
- Affiliations
- Northwest University (CN)
- Engineering Research Center of Western Resource Innovation Medicine Green Manufacturing, Ministry of Education, School of Chemical Engineering, Northwest University , Xi’an 710069, China
- Corresponding author
- Yao, Tianyu
- Ma, Pei
- Fan, Daidi
- Venue
- Regenerative Biomaterials
- Publisher
- Oxford University Press (OUP)
- Published
- 2024
- Volume
- 11
- Pages
- rbae097-rbae097
- ISSN
- 2056-3418 (ISSN-L)
- 2056-3426
- PMC
- PMC11364519
- OpenAlex
- W4401937287
- Cited by
- 29
- References
- 54
- Citations by year
- 2026: 16 · 2025: 13
- FWCI
- 3.18
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- Regenerative Biomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- National Key R&D Program of China (2022YFC2104800)
- National Natural Science Foundation of China (22208264)
- Topics
- Physical Sciences › Engineering › Biomedical Engineering › 3D Printing in Biomedical Research
- Physical Sciences › Materials Science › Biomaterials › Hydrogels: synthesis, properties, applications
- Health Sciences › Medicine › Rheumatology › Osteoarthritis Treatment and Mechanisms
- Keywords
- cartilage regeneration, 3D bioprinting, recombinant collagen, nanoclay, Laponite, kartogenin, extrusion printing, drug-loaded hydrogels, sustained drug release, bone marrow mesenchymal stem cells, chondrogenic differentiation, antimicrobial scaffolds, cartilage defects, tissue engineering scaffolds
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.