Surface modification of biodegradable magnesium and its alloys for biomedical applications
Open accessThe DOI matches its Crossref record; 125 of the 125 references it cites were found in a registry or an index.
Abstract
Magnesium and its alloys are being paid much attention recently as temporary implants, such as orthopedic implants and cardiovascular stents. However, the rapid degradation of them in physiological environment is a major obstacle preventing their wide applications to date, which will result in rapid mechanical integrity loss or even collapse of magnesium-based implants before injured tissues heal. Moreover, rapid degradation of the magnesium-based implants will also cause some adverse effects to their surrounding environment, such as local gas cavity around the implant, local alkalization and magnesium ion enrichment, which will reduce the integration between implant and tissue. So, in order to obtain better performance of magnesium-based implants in clinical trials, special alloy designs and surface modifications are prerequisite. Actually, when a magnesium-based implant is inserted in vivo, corrosion firstly happens at the implant-tissue interface and the biological response to implant is also determined by the interaction at this interface. So the surface properties, such as corrosion resistance, hemocompatibility and cytocompatibility of the implant, are critical for their in vivo performance. Compared with alloy designs, surface modification is less costly, flexible to construct multi-functional surface and can prevent addition of toxic alloying elements. In this review, we would like to summarize the current investigations of surface modifications of magnesium and its alloys for biomedical application. The advantages/disadvantages of different surface modification methods are also discussed as a suggestion for their utilization.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Figures

![Figure 2. (a) Surface and cross-sectional morphologies of Mg(OH)2 film by NaOH treatment for 3 h [66]. (b) Digital photographs and FE-SEM images of color-tuned surfaces on AZ31 alloy by water treatment [69]. (c) Surface and cross-sectional morphologies of fluoride-treated AZ31 alloy for 72 h. The insert shows the high magnification [71]. (d) Surface and cross-sectional morphologies of the MAO-coated Mg–Zn–Zr alloy [76]. (e) Surface morphologies of Mg–Fe–CO3 LDH layers on pure magnesium by different treatment process [80].](https://figures.cochat.ai/paper-figures/fb34402ec8e346e5a016c65aff5a9cee/surface-modification-of-biodegradable-magnesium-and-its-alloys-for-biomedical-figure-2.jpg)
![Figure 3. (a) Surface morphologies of DCPD, HA and FHA on Mg–Zn alloy by electrodeposition process [87]. (b) Surface morphologies of DCPD [92], β-TCP [94] and HA [96] on magnesium substrate by chemical solution treatment. (c) Surface morphologies of DCPD, DCPD-HA and HA on magnesium substrate by biomimetic process [98].](https://figures.cochat.ai/paper-figures/229369952c4f4c43852a582d0ccc1c6b/surface-modification-of-biodegradable-magnesium-and-its-alloys-for-biomedical-figure-3.jpg)
![Figure 4. (a) Surface morphologies of compact polymer coatings on magnesium substrate [101]. (b) Surface morphologies of porous PCL coatings on AZ91 alloy [35]. (c) Surface morphologies of PEDOT conductive coatings fabricated on magnesium with different processes [104].](https://figures.cochat.ai/paper-figures/12ae3b7073aa4f40a29d2ef03b15e1e8/surface-modification-of-biodegradable-magnesium-and-its-alloys-for-biomedical-figure-4.jpg)
![Figure 5. (a) Surface and sectional morphologies of DCPD/MgF2 and HA/MgF2 composite coatings on Mg–Ca–Zn alloy [108]. (b) Surface morphologies of WE42, WE42-MAO, WE42-MAO/PLLA and corrosion mass loss of WE42, WE42-MAO/PLLA [109]. (c) Surface morphologies and elemental compositions of MAO and calcification MAO coatings, cross-sectional morphology of calcification MAO coating [111].](https://figures.cochat.ai/paper-figures/3c744567a9264dbd9b8bd37b2fbf2a77/surface-modification-of-biodegradable-magnesium-and-its-alloys-for-biomedical-figure-5.jpg)
![Figure 6. (a) XPS depth profile of CO2-PIII-treated AZ31 alloy and polarization curves of untreated and CO2-PIII-treated AZ31 alloy in DMEM and SBF [115]. (b) XPS depth profile, polarization curve in SBF and corrosion in SBF for 18 h of Zn-PIII-treated pure Mg [116]. (c) XPS depth profile, GIXRD pattern and polarization curve in SBF of Al-PIII-treated pure Mg [117].](https://figures.cochat.ai/paper-figures/385b653296cc456e9ac5368cc886b26b/surface-modification-of-biodegradable-magnesium-and-its-alloys-for-biomedical-figure-6.jpg)
![Figure 7. (a) XPS depth profile, polarization curve and EIS spectrum of Al–O dual ion implantation treated WE43 alloy [120]. (b) XPS depth profiles and polarization curves of Ti and Ti–O dual ion implantation treated WE43 alloy [122]. (c) XPS depth profile and polarization curves in SBF and Na2SO4 of Cr–O dual ion implantation treated pure Mg [125].](https://figures.cochat.ai/paper-figures/5209d2478d74464aaddf2a99861eee3c/surface-modification-of-biodegradable-magnesium-and-its-alloys-for-biomedical-figure-7.jpg)
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Surface modification of magnesium to overcome these drawbacks is the most effective method for controlling corrosion and enhancing bioactivity [36,37].”
From Functional Surface Modification of Magnesium Implant by Drug-Loaded Biodegradable Polymer Coating (2026) · cites this paper as [37]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
How useful is SBF in predicting in vivo bone bioactivity?
Kokubo, T., & Takadama, H. (2006) · Biomaterials · doi:10.1016/j.biomaterials.2006.01.017 · Cited by 9,576
Ti based biomaterials, the ultimate choice for orthopaedic implants – A review
Geetha, M., Singh, A. K., Asokamani, R., & Gogia, A. K. (2009) · Progress in Materials Science · doi:10.1016/j.pmatsci.2008.06.004 · Cited by 5,416 · cited 1×
“The early metallic materials used as biomedical implants consist of stainless steel [1, 2], Co–Cr-based alloys [3–6], titanium-based alloys [6–12], zirconium-based alloys [13, 14] and tantalum-based alloys [15, 16].”
BackgroundTitanium alloys in total joint replacement—a materials science perspective
Long, M., & Rack, H. J. (1998) · Biomaterials · doi:10.1016/s0142-9612(97)00146-4 · Cited by 3,510 · cited 1×
“The early metallic materials used as biomedical implants consist of stainless steel [1, 2], Co–Cr-based alloys [3–6], titanium-based alloys [6–12], zirconium-based alloys [13, 14] and tantalum-based alloys [15, 16].”
BackgroundSynthetic biodegradable polymers as orthopedic devices
Middleton, J. C., & Tipton, A. J. (2000) · Biomaterials · doi:10.1016/s0142-9612(00)00101-0 · Cited by 2,741
Biodegradation and biocompatibility of PLA and PLGA microspheres
Anderson, J. M., & Shive, M. S. (1997) · Advanced Drug Delivery Reviews · doi:10.1016/s0169-409x(97)00048-3 · Cited by 2,617 · cited 1×
“the degradation process or the corrosion products can induce local inflammation and the products of inflammation can enhance the degradation process [47, 48].”
BackgroundIn vivo corrosion of four magnesium alloys and the associated bone response
Witte, F., Kaese, V., Haferkamp, H., Switzer, E., Meyer-Lindenberg, A., Wirth, C. J., & Windhagen, H. (2005) · Biomaterials · doi:10.1016/j.biomaterials.2004.09.049 · Cited by 2,395 · cited 1×
“The rapid degradation of magnesium implant in vivo also leads to an accumulation of hydrogen nearby the implant because of limited hydrogen gas adsorption ability of the tissues [27, 44].”
BackgroundThe history of biodegradable magnesium implants: A review☆
Witte, F. (2010) · Acta Biomaterialia · doi:10.1016/j.actbio.2010.02.028 · Cited by 1,860 · cited 1×
“However, although most patients experienced subcutaneous gas cavities by rapid degradation of the implants, they had no pain and almost no infections were observed during the postoperative following up in the early clinical cases [45].”
BackgroundInfluentialDegradable biomaterials based on magnesium corrosion
Witte, F., Hort, N., Vogt, C., Cohen, S., Kainer, K. U., Willumeit, R., & Feyerabend, F. (2008) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2009.04.001 · Cited by 1,820 · cited 2×
“The rapid degradation of magnesium implant in vivo also leads to an accumulation of hydrogen nearby the implant because of limited hydrogen gas adsorption ability of the tissues [27, 44].”
BackgroundThe development of binary Mg–Ca alloys for use as biodegradable materials within bone
Li, Z., Gu, X., Lou, S., & Zheng, Y. (2008) · Biomaterials · doi:10.1016/j.biomaterials.2007.12.021 · Cited by 1,593 · cited 1×
“Mg–Ca [51, 52], Mg–Zn [53, 54], Mg–Sr [55] and Mg–Ag [56, 57] alloys have been developed by adding single nutrient element or antibacterial element.”
BackgroundSaris, N.-E. L., Mervaala, E., Karppanen, H., Khawaja, J. A., & Lewenstam, A. (2000) · Clinica Chimica Acta · doi:10.1016/s0009-8981(99)00258-2 · Cited by 1,366 · cited 2×
“So the incidence of hyper-magnesium is rare due to the efficient excretion of excess magnesium ions through urine [34].”
Research works printed but not linked: 13
- 1976, The Bone & Joint Journal, 58, 107
- 2008, 12, 63
- 2013, MATER CORROSION, 64, 1
- 2012, Journal of biomedical materials research. Part A, 101, 1898
- 2012, 66, 209
- 2012, 83, 206
- 2013, Journal of materials science. Materials in medicine, 24, 889
- 2010, 6, 1743, 10.1016/j.actbio.2009.12.009 · DOI · Paper page
- 2013, Journal of biomedical materials research. Part A, 101, 2340
- 2013, Journal of materials science. Materials in medicine, 24, 85
- 2011, J BIOMED MATER RES PART B APPL BIOMATER, 96, 101
- 2011, 65, 661
- 2011, 65, 2171
Cited by
Research and Development in Magnesium Alloys for Industrial and Biomedical Applications: A Review
Vignesh, R. V., Ramasamy, P., Kovukkal, M. D., & Myilsamy, G. (2019) · Metals and Materials International · doi:10.1007/s12540-019-00346-8 · Cited by 310
Biodegradable metallic bone implants
Shuai, C., Li, S., Peng, S., Feng, P., Lai, Y., & Gao, C. (2019) · Materials Chemistry Frontiers · doi:10.1039/c8qm00507a · Cited by 275
Applications of Metals for Bone Regeneration
Glenske, K., Donkiewicz, P., Köwitsch, A., Milosevic-Oljaca, N., Rider, P., Rofall, S., Franke, J., Jung, O., Smeets, R., Schnettler, R., et al. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19030826 · Cited by 247
Magnesium based implants for functional bone tissue regeneration – A review
Uppal, G., Thakur, A., Chauhan, A., & Bala, S. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.08.017 · Cited by 209
Surface treatments for controlling corrosion rate of biodegradable Mg and Mg-based alloy implants
Uddin, M. S., Hall, C., & Murphy, P. (2015) · Science and Technology of Advanced Materials · doi:10.1088/1468-6996/16/5/053501 · Cited by 189
“Furthermore, the detailed description of different types of ion implantation can be found in a comprehensive review performed by Tian and Liu [69].”
BackgroundInfluentialProtection of magnesium alloys: From physical barrier coating to smart self-healing coating
Zhang, D., Peng, F., & Liu, X. (2021) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2020.157010 · Cited by 182
Self-citationBiodegradable stents for coronary artery disease treatment: Recent advances and future perspectives
Hu, T., Yang, C., Lin, S., Yu, Q., & Wang, G. (2018) · Materials Science and Engineering: C · doi:10.1016/j.msec.2018.04.100 · Cited by 163
Li, L., Zhang, M., Li, Y., Zhao, J., Qin, L., & Lai, Y. (2017) · Regenerative Biomaterials · doi:10.1093/rb/rbx004 · Cited by 150
“Surface treatments To slow down the corrosion rate of Mg or Mg-based alloys and improve the biocompatibility and maintain the mechanical properties, various surface treatment methods were developed and estimated to regulate the corrosion rate of Mg or Mg alloy [54].”
MethodOsteogenesis, angiogenesis and immune response of Mg-Al layered double hydroxide coating on pure Mg
Cheng, S., Zhang, D., Li, M., Liu, X., Zhang, Y., Shi, Q., & Peng, F. (2020) · Bioactive Materials · doi:10.1016/j.bioactmat.2020.07.014 · Cited by 156
Self-citationRecent progress on coatings of biomedical magnesium alloy
Tong, P., Sheng, Y., Hou, R., Iqbal, M., Chen, L., & Li, J. (2021) · Smart Materials in Medicine · doi:10.1016/j.smaim.2021.12.007 · Cited by 140
Research status of biodegradable metals designed for oral and maxillofacial applications: A review
Xia, D., Yang, F., Zheng, Y., Liu, Y., & Zhou, Y. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.01.011 · Cited by 161
“especially natural cortical bone, which greatly weakens the “stress shielding” effect, thus, decreasing bone resorption [19,73].”
BackgroundMicroheater: material, design, fabrication, temperature control, and applications—a role in COVID-19
Jeroish, Z. E., Bhuvaneshwari, K. S., Samsuri, F., & Narayanamurthy, V. (2021) · Biomedical Microdevices · doi:10.1007/s10544-021-00595-8 · Cited by 129
Peng, F., Wang, D., Zhang, D., Yan, B., Cao, H., Qiao, Y., & Liu, X. (2018) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01184 · Cited by 111
Self-citationZeng, R., Li, X., Liu, Z., Zhang, F., Li, S., & Cui, H. (2015) · Frontiers of Materials Science · doi:10.1007/s11706-015-0307-7 · Cited by 110
“Frontiers of Materials Science, 2014, 8(3): 307–312 [7] Tian P, Liu X.”
BackgroundBiodegradable magnesium barrier membrane used for guided bone regeneration in dental surgery
Rider, P., Kačarević, Ž. P., Elad, A., Tadić, D., Rothamel, D., Sauer, G., Bornert, F., Windisch, P., Hangyási, D. B., Molnár, B., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.11.018 · Cited by 101
“Magnesium implants provide a mechanical stability that is more similar to bone than other metallic implants [41].”
BackgroundTian, P., Xu, D., & Liu, X. (2016) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2016.02.004 · Cited by 102
Self-citationPeral, L. B., Zafra, A., Bagherifard, S., Guagliano, M., & Fernandez-Pariente, I. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.126285 · Cited by 94
Yuan, B., Chen, H., Zhao, R., Deng, X., Chen, G., Yang, X., Xiao, Z., Antoniac, A., Iulia, B. A., Zhang, K., et al. (2022) · Bioactive Materials · doi:10.1016/j.bioactmat.2022.02.030 · Cited by 118
“However, some previous studies indicated that fragility and weak bonding to the substrate of the coating potentially led to early failure of the bone-implant interface [26].”
BackgroundResultHuynh, V., Ngo, N. K., & Golden, T. D. (2019) · International Journal of Biomaterials · doi:10.1155/2019/3806504 · Cited by 86
Fattah‐alhosseini, A., Chaharmahali, R., Rajabi, A., Babaei, K., & Kaseem, M. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040267 · Cited by 80
Formation of flower-like structures for optimizing the corrosion resistance of Mg alloy
Kaseem, M., & Ko, Y. G. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.03.119 · Cited by 78
Li, H., Peng, F., Wang, D., Qiao, Y., Xu, D., & Liu, X. (2018) · Biomaterials Science · doi:10.1039/c8bm00298c · Cited by 79
Self-citationMg-Fe LDH sealed PEO coating on magnesium for biodegradation control, antibacteria and osteogenesis
Zhang, D., Zhou, J., Peng, F., Tan, J., Zhang, X., Shi, Q., Qiao, Y., Zhang, Y., & Liu, X. (2021) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.05.088 · Cited by 78
Self-citationSurface-modified titanium and titanium-based alloys for improved osteogenesis: A critical review
Li, J., Zheng, Y., Yu, Z., Kankala, R. K., Lin, Q., Shi, J., Chen, C., Luo, K., Chen, A., & Zhong, Q. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e23779 · Cited by 78
PEO coatings design for Mg-Ca alloy for cardiovascular stent and bone regeneration applications
Santos‐Coquillat, A., Esteban-Lucía, M., Martínez‐Campos, E., Mohedano, M., Arrabal, R., Blawert, C., Zheludkevich, M. L., & Matykina, E. (2019) · Materials Science and Engineering C · doi:10.1016/j.msec.2019.110026 · Cited by 77
Antimicrobial Properties of MgO Nanostructures on Magnesium Substrates
Lin, J., Nguyen, N.-Y. T., Zhang, C., Ha, A., & Liu, H. H. (2020) · ACS Omega · doi:10.1021/acsomega.0c03151 · Cited by 75
Uddin, M., Rosman, H., Hall, C. J., & Murphy, P. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9536-x · Cited by 71
Biodegradable shape memory alloys: Progress and prospects
Wang, Y., Venezuela, J., & Dargusch, M. S. (2021) · Biomaterials · doi:10.1016/j.biomaterials.2021.121215 · Cited by 70
Resorbable Mg2+-Containing Phosphates for Bone Tissue Repair
Kazakova, G. K., Safronova, T. V., Golubchikov, D. O., Shevtsova, O., & Rau, J. V. (2021) · Materials · doi:10.3390/ma14174857 · Cited by 69
Guided Bone Regeneration Using Barrier Membrane in Dental Applications
Kim, K., Su, Y., Kucine, A. J., Cheng, K., & Zhu, D. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.3c00690 · Cited by 72
Barbeck, M., Kühnel, L., Witte, F., Pissarek, J., Precht, C., Xiong, X. B., Krastev, R., Wegner, N., Walther, F., & Jung, O. (2020) · International Journal of Molecular Sciences · doi:10.3390/ijms21093098 · Cited by 65
Kuang, J., Ba, Z., Li, Z., Jia, Y., & Wang, Z. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.01.009 · Cited by 67
Biodegradable magnesium fixation screw for barrier membranes used in guided bone regeneration
Kačarević, Ž. P., Rider, P., Elad, A., Tadić, D., Rothamel, D., Sauer, G., Bornert, F., Windisch, P., Hangyási, D. B., Molnár, B., et al. (2021) · Bioactive Materials · doi:10.1016/j.bioactmat.2021.10.036 · Cited by 64
“The elastic modulus of magnesium is closer to that of bone than that of other metals used for implants; approximately 45 GPa, which is closer to cortical bone (5–23 GPa) than for example titanium (100–125 GPa) [31].”
BackgroundDynamic degradation of porous magnesium under a simulated environment of human cancellous bone
Saad, A. P. M., Jasmawati, N., Harun, M. N., Kadir, M. R. A., Nur, H., Hermawan, H., & Syahrom, A. (2016) · Corrosion Science · doi:10.1016/j.corsci.2016.08.017 · Cited by 64
Magnesium Promotes the Regeneration of the Peripheral Nerve
Zhang, J., Zhang, B., Zhang, J., Lin, W., & Zhang, S. (2021) · Frontiers in Cell and Developmental Biology · doi:10.3389/fcell.2021.717854 · Cited by 61
“Moreover, it will lead to differences in the coating performance if different coating ways are applied (Tian and Liu, 2015).”
BackgroundThree Potential Elements of Developing Nerve Guidance Conduit for Peripheral Nerve Regeneration
Zhang, C., Gong, J., Zhang, J., Zhu, Z., Qian, Y., Lu, K., Zhou, S., Gu, T., Wang, H., He, Y., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202302251 · Cited by 64
Biodegradable Metallic Wires in Dental and Orthopedic Applications: A Review
Asgari, M. S., Hang, R., Wang, C., Yu, Z., Li, Z., & Xiao, Y. (2018) · Metals · doi:10.3390/met8040212 · Cited by 64
“Pits or cracks created by the rapid corrosion might result in sudden failure, even at the initial stage after implantation [96].”
BackgroundMethodCai, L., Song, X., Liu, C., Cui, L., Li, S., Zhang, F., Kannan, M. B., Chen, D., & Zeng, R. (2022) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2022.10.087 · Cited by 58
Pan, C., Hou, Y., Wang, Y.-N., Gao, F., Liu, T., Hou, Y., Zhu, Y., Ye, W., & Wang, L. (2016) · Materials Science and Engineering C · doi:10.1016/j.msec.2016.05.038 · Cited by 58
Loperena, A. P., Lehr, I. L., & Saidman, S. B. (2016) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2016.10.002 · Cited by 56
İncesu, A., & Güngör, A. (2020) · Journal of Materials Science Materials in Medicine · doi:10.1007/s10856-020-06468-5 · Cited by 53
Hybrid functionalized coatings on Metallic Biomaterials for Tissue Engineering
Santos‐Coquillat, A., Martínez‐Campos, E., Sánchez, H., Moreno, L., Arrabal, R., Mohedano, M., Gallardo, A., Rodríguez‐Hernández, J., & Matykina, E. (2021) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2021.127508 · Cited by 63
Kurzyk, A., Szwed, A., Pagacz, J., Antosik, A., Tymowicz‐Grzyb, P., Gerle, A., Szterner, P., Włodarczyk, M., Płociński, P., Urbaniak, M. M., et al. (2023) · Scientific Reports · doi:10.1038/s41598-023-42271-2 · Cited by 51
A review on corrosion protection with single-layer, multilayer, and composites of graphene
Gergely, A. (2017) · Corrosion Reviews · doi:10.1515/corrrev-2017-0016 · Cited by 54
Matias, T. B., Roche, V., Nogueira, R. P., Asato, G. H., Kiminami, C. S., Bolfarini, C., Filho, W. J. B., & Jorge, A. M. (2016) · Materials & Design · doi:10.1016/j.matdes.2016.07.148 · Cited by 49
Ali, W., Mehboob, A., Han, M.-G., & Chang, S. (2018) · Composite Structures · doi:10.1016/j.compstruct.2018.12.011 · Cited by 48
Fattah‐alhosseini, A., & Chaharmahali, R. (2023) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2023.10.005 · Cited by 47
Vignesh, R. V., Padmanaban, R., Govindaraju, M., & Priyadharshini, G. S. (2019) · Transactions of the IMF · doi:10.1080/00202967.2019.1648005 · Cited by 47
Panahi, Z., Tamjid, E., & Rezaei, M. (2020) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2020.125461 · Cited by 46
Fluoride Coatings on Magnesium Alloy Implants
Zhai, C., Dai, C. Y., Lv, X., Shi, B., Li, Y. R., Yang, Y., Fan, D., Lee, E., Sun, Y., & Jiang, H. B. (2022) · Bioinorganic Chemistry and Applications · doi:10.1155/2022/7636482 · Cited by 43
“PEO, also known as microarc oxidation (MAO), is the use of plasma arc discharge at the electrolyte/electrolyte interface to react with the electrolyte and sinter the substrate surface to form a coating [10].”
BackgroundSolomon, S. M., Șufaru, I.-G., Teslaru, S., Ghiciuc, C. M., & Stafie, C. S. (2022) · Applied Sciences · doi:10.3390/app12031042 · Cited by 47
Седельникова, М. Б., Геннадьевна, К. Е., Sharkeev, Y. P., Tolkacheva, T. V., Sheikin, V. V., Egorkin, V. S., Mashtalyar, D. V., Kazakbaeva, A. A., & Schmidt, J. (2018) · Metals · doi:10.3390/met8040238 · Cited by 42
“Due to their good mechanical properties, metals and alloys have great advantages in comparison with ceramics, polymers and polymer/ceramic composites [1].”
BackgroundSaranya, K., Kalaiyarasan, M., & Rajendran, N. (2019) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2019.124902 · Cited by 41
Han, Y. Y., You, C., Zhao, Y., Chen, M. F., & Wang, L. (2019) · Frontiers in Materials · doi:10.3389/fmats.2019.00324 · Cited by 41
“In the current studies, the main alloying elements are Ca, Sr, Zn, Si, Mn, Li, Zr, Nd, Y, RE, Al (Gu et al., 2012; Li and Zheng, 2013; Yin et al., 2013; Zhou et al., 2013; Seong and Kim, 2015; Tian and Liu, 2015; Yandong et al., 2015; Cho et al., 2016; Bian et al., 2017; Gil-Santos et al., 2017; Jiang et al., 2017; Gu…”
BackgroundRoshan, N. R., Hassannejad, H., & Nouri, A. (2020) · Surface Engineering · doi:10.1080/02670844.2020.1776093 · Cited by 41
A review of additive manufacturing of magnesium alloys
Jahangir, M. N., Mamun, M. A. H., & Sealy, M. P. (2018) · AIP conference proceedings · doi:10.1063/1.5044305 · Cited by 40
Yang, C.-W., & Wang, G.-K. (2020) · Materials · doi:10.3390/ma13030591 · Cited by 40
“Since the appropriate concentration of Mg2+ ions play an essential role in bone remodeling [14], a controllable and protective coating is particularly needed for regulating the degradation rate of Mg alloys [15,16].”
BackgroundProspects of friction stir processed Mg alloys and composites-Reviews and suggestions
Palanikumar, K., Natarajan, E., Suresh, S., Mohan, D. G., Prakash, C., & Kaur, K. (2024) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2024.06.087 · Cited by 39
Corrosion properties of bioresorbable FeMn‐Ag alloys prepared by selective laser melting
Wiesener, M., Peters, K., Taube, A., Keller, A., Hoyer, K., Niendorf, T., & Grundmeier, G. (2017) · Materials and Corrosion · doi:10.1002/maco.201709478 · Cited by 39
Ding, Z., Yuan, Q., Wang, H., Tang, Y., Tan, Y., & He, Q. (2022) · Ceramics International · doi:10.1016/j.ceramint.2022.08.324 · Cited by 37
Shanaghi, A., & Chu, P. K.-H. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.04.027 · Cited by 36
Sharma, G. K., Kumar, K., Satsangi, P. S., & Sharma, N. (2021) · IRBM · doi:10.1016/j.irbm.2021.02.003 · Cited by 36
Corrosion Resistance of MgZn Alloy Covered by Chitosan-Based Coatings
Kozina, I., Krawiec, H., Starowicz, M., & Kawalec, M. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms22158301 · Cited by 35
“The most popular coatings are hydroxides-based coatings [6,7], metal oxide based coatings [8,9], silane sol-gel coatings [10–12], Ca-P coatings [13–15] and polymer coatings [16,17].”
BackgroundAboutalebianaraki, N., Neal, C. J., Seal, S., & Razavi, M. (2022) · Journal of Functional Biomaterials · doi:10.3390/jfb13040261 · Cited by 35
Steigmann, L., Jung, O., Kieferle, W., Stojanović, S., Pröhl, A., Görke, O., Emmert, S., Najman, S. J., Barbeck, M., & Rothamel, D. (2020) · Biomedicines · doi:10.3390/biomedicines8120636 · Cited by 35
“The technique ion implantation (II) includes the bombardment of ionized species and their implantation into the first atomic layers of a solid and can be combined with different other coating techniques [13,14].”
MethodLi, W., Tian, A., Li, T., Zhao, Y., & Chen, M. (2023) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2023.129555 · Cited by 35
Pasha, M. B., Rao, R. N., Ismail, S., Özcan, M., Prasad, P. S., & Gupta, M. K. (2022) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2022.06.085 · Cited by 34
Ali, W., Li, M., Tillmann, L., Mayer, T., González, C., LLorca, J., & Kopp, A. (2023) · Biomaterials Advances · doi:10.1016/j.bioadv.2023.213314 · Cited by 34
Recent Developments in Engineered Magnesium Scaffolds for Bone Tissue Engineering
Dutta, S., & Roy, M. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01510 · Cited by 36
Calcium Chloride (CaCl2) : Characteristics and Molecular Interaction in SolutionPreprint
Alfionita, T., & Zainul, R. (2019) · INA-Rxiv (OSF Preprints) · doi:10.31227/osf.io/m37xj · Cited by 34
Pan, C., Zuo, C., Chen, J., Zhang, Q., Deng, L., Liu, Y., & Ding, P. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.135166 · Cited by 34
Naujokat, H., Ruff, C. B., Klüter, T., Seitz, J. M., Açil, Y., & Wiltfang, J. (2019) · International Journal of Oral and Maxillofacial Surgery · doi:10.1016/j.ijom.2019.03.966 · Cited by 33
In Vivo Simulation of Magnesium Degradability Using a New Fluid Dynamic Bench Testing Approach
Jung, O., Porchetta, D., Schroeder, M.-L., Klein, M. J., Wegner, N., Walther, F., Feyerabend, F., Barbeck, M., & Kopp, A. (2019) · International Journal of Molecular Sciences · doi:10.3390/ijms20194859 · Cited by 33
Pokharel, D. B., Liping, W., Dong, J., Wei, X., Etim, I. N., Subedi, D. B., Umoh, A. J., & Ke, W. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.03.080 · Cited by 33
Ceria-based coatings on magnesium alloys for biomedical applications: a literature review
Hernández-Montes, V., Buitrago‐Sierra, R., Echeverry‐Rendón, M., & Santa, J. F. (2023) · RSC Advances · doi:10.1039/d2ra06312c · Cited by 32
Nikbakht, A., Dehghanian, C., & Parichehr, R. (2021) · RSC Advances · doi:10.1039/d1ra01018b · Cited by 31
Antibacterial Pure Magnesium and Magnesium Alloys for Biomedical Materials—A Review
Song, Q., Yang, L., Yi, F., Chen, C., Guo, J., Qi, Z., & Song, Y. (2024) · Crystals · doi:10.3390/cryst14110939 · Cited by 31
“In vivo, degradation is speedy [6–9], rapidly weakening mechanical characteristics.”
Wu, F., Liang, J. Y., & Li, W. (2015) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2015.08.004 · Cited by 30
Peng, F., Wang, D., Zhang, D., Yan, B., Cao, H., Qiao, Y., & Liu, X. (2021) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.1c00358 · Cited by 30
Self-citationLi, H., Wang, F., Sun, X., Qi, L., Li, J., Iqbal, M., & Guan, S. (2024) · Rare Metals · doi:10.1007/s12598-024-02794-7 · Cited by 29
Cai, H., Zhang, Y., Meng, J., Li, X., Xue, F., Chu, C., Tao, L., & Bai, J. (2018) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2018.07.045 · Cited by 29
Overview of porous magnesium-based scaffolds: development, properties and biomedical applications
Motaharinia, A., Drelich, J. W., Sharif, S., Ismail, A. F., Naeimi, F., Glover, A., Ebrahiminejad, M., & Bakhsheshi‐Rad, H. R. (2024) · Materials Futures · doi:10.1088/2752-5724/ad9493 · Cited by 28
Rider, P., Kačarević, Ž. P., Elad, A., Rothamel, D., Sauer, G., Bornert, F., Windisch, P., Hangyási, D. B., Molnár, B., Hesse, B., et al. (2022) · Materials · doi:10.3390/ma15124111 · Cited by 28
“It has mechanical properties more similar to that of bone than other metals used for fixation screws [16].”
BackgroundA Review Ba(OH)2 : Transpor Ionik pada Barium Hidroksida di dalam Air dengan Konsep TermodinamikaPreprint
Yanti, C. F., & Zainul, R. (2018) · INA-Rxiv (OSF Preprints) · doi:10.31227/osf.io/fsbq3 · Cited by 28
Chauhan, K., Karloopia, J., Walia, R. S., & Dhanda, M. (2024) · Critical reviews in solid state and materials sciences/CRC critical reviews in solid state and materials sciences · doi:10.1080/10408436.2024.2323010 · Cited by 28
Rajan, S. T., Das, M., & Arockiarajan, A. (2022) · Colloids and Surfaces B Biointerfaces · doi:10.1016/j.colsurfb.2022.112342 · Cited by 26
Boinovich, L. B., Emelyanenko, K. A., & Emelyanenko, A. M. (2024) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2024.130607 · Cited by 26
Rigidity‐Tunable Materials for Soft Engineering Systems
Roh, Y., Lim, D., Kang, M., Cho, J., Han, S., & Ko, S. H. (2024) · Advanced Engineering Materials · doi:10.1002/adem.202400563 · Cited by 25
Innovative Coatings of Metallic Alloys Used as Bioactive Surfaces in Implantology: A Review
Prodana, M., Stoian, A. B., Burnei, C., & Ioniță, D. (2021) · Coatings · doi:10.3390/coatings11060649 · Cited by 27
“Biode‐ gradable polymer coatings can prevent corrosion postimplantation [146,147].”
BackgroundBiocompatibility Analyses of HF-Passivated Magnesium Screws for Guided Bone Regeneration (GBR)
Jung, O., Hesse, B., Stojanović, S., Seim, C., Weitkamp, T., Batinic, M., Görke, O., Kačarević, Ž. P., Rider, P., Najman, S. J., et al. (2021) · International Journal of Molecular Sciences · doi:10.3390/ijms222212567 · Cited by 24
Wattanavijitkul, T., Khamwannah, J., Lohwongwatana, B., Puncreobutr, C., Reddy, N., Yamdech, R., Cherdchom, S., & Aramwit, P. (2024) · ACS Omega · doi:10.1021/acsomega.4c03942 · Cited by 23
Onyeagba, C. R., & Tesfamichael, T. (2025) · Microstructures · doi:10.20517/microstructures.2024.89 · Cited by 23
Biodegradable Magnesium Alloys as Promising Materials for Medical Applications (Review)
Kiselevsky, M. V., Anisimova, N. Y., Polotsky, B. E., Martynenko, N. S., Lukyanova, E. A., Ситдикова, С. М., Dobatkin, S. V., & Estrin, Y. Z. (2019) · Современные технологии в медицине · doi:10.17691/stm2019.11.3.18 · Cited by 26
Asdi, M. H., Khan, M. U. A., Shafique, A., Hussain, J. I., Bashir, S., Awan, S. U., & Shah, S. A. (2023) · Materials Today Communications · doi:10.1016/j.mtcomm.2023.107039 · Cited by 26
Hashemi, T. S., Jaiswal, S., McCarthy, H. O., Levingstone, T. J., & Dunne, N. (2025) · Biomaterials Advances · doi:10.1016/j.bioadv.2024.214170 · Cited by 23
Effect of Magnesium on Dentinogenesis of Human Dental Pulp Cells
Salem, R. M., Zhang, C., & Chou, L. L. (2021) · International Journal of Biomaterials · doi:10.1155/2021/6567455 · Cited by 23
“Several studies revealed that osteogenic cells surrounding Mg-containing biomaterials showed enhanced osteogenic activities [49, 50].”
BackgroundInhibition of Mg corrosion in physiological fluids by carbonate coating
Popa, M., Ștefan, L. M., Prelipcean, A., Drob, S. I., Anastasescu, M., & Moreno, J. M. C. (2022) · Corrosion Science · doi:10.1016/j.corsci.2022.110775 · Cited by 22
Du, X., Song, Y., Xuan, X., Chen, S., Xia, W., Jiang, H. B., Lee, E., & Wang, X. (2020) · Scanning · doi:10.1155/2020/6743195 · Cited by 21
“Tian and Liu studied that hydrofluoric acid coating can reduce the CR of magnesium alloys, delaying the corrosion process in cell culture medium for at least one week [25].”
BackgroundLu, X., Cai, H., Li, Y. R., Zheng, X., Yun, J., Li, W., Geng, X., Kwon, J., & Jiang, H. B. (2022) · Bioinorganic Chemistry and Applications · doi:10.1155/2022/4529520 · Cited by 22
Santos‐Coquillat, A., Martínez‐Campos, E., Vargas‐Alfredo, N., Arrabal, R., Rodríguez‐Hernández, J., & Matykina, E. (2019) · Macromolecular Bioscience · doi:10.1002/mabi.201900179 · Cited by 21
Metadata
- Authors
- Tian, P., & Liu, X.
- Affiliations
- Chinese Academy of Sciences (CN)
- Corresponding author
- Liu, X.
- ORCID
- Tian, P.
- Venue
- Regenerative Biomaterials
- Publisher
- Oxford University Press (OUP)
- Published
- 2014-11-27
- Volume
- 2
- Issue
- 2
- Pages
- 135-151
- ISSN
- 2056-3418 (ISSN-L)
- 2056-3426
- PMC
- PMC4669019
- OpenAlex
- W1971085544
- Semantic Scholar
- 7eb87072668a371340f5c86266b38187c0e8fcb8
- Cited by
- 218
- References
- 124
- Citations by year
- 2026: 23 · 2025: 23 · 2024: 22 · 2023: 15 · 2022: 23 · 2021: 28 · 2020: 26 · 2019: 22 · 2018: 19 · 2017: 6 · 2016: 8 · 2015: 3
- FWCI
- 0.39
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Licence
- cc-by
- Locations
- Regenerative Biomaterials (publishedVersion, cc-by)
- PubMed Central (publishedVersion, cc-by)
- PubMed (publishedVersion)
- Funders
- National Natural Science Foundation of China (973 Program, 2012CB933600, 81271704)
- National Key Research and Development Program of China (973 Program, 2012CB933600, 2012CB933600)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Magnesium Alloys: Properties and Applications
- Physical Sciences › Materials Science › Materials Chemistry › Titanium Alloys Microstructure and Properties
- Physical Sciences › Engineering › Mechanical Engineering › Surface Treatment and Coatings
- Keywords
- magnesium alloys, biodegradable implants, surface modification, corrosion resistance, hemocompatibility, cytocompatibility, implant-tissue interface, temporary implants, orthopedic implants, cardiovascular stents, magnesium ion release, biodegradation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.