The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The direct measurement of normal and retarded van der Waals forces
Abstract
A direct measurement has been made of the forces in air between two cylindrical sheets of mica arranged with their axes mutually at right angles. The contact resembles that between a sphere and a flat. The mica sheets are glued to glass formers, their concave face being first slightly silvered. The contact region and the distance of approach are measured by multiple beam interferometry using fringes of equal chromatic order (f. e. c. o.). This gives an accuracy for the distances between the surfaces of ± 0.3 nm. Since the surfaces are molecularly smooth it is possible to bring them very close to one another. One surface is held on a rigid support, the other on a light cantilever beam. The surfaces are slowly brought together and at a critical separation ‘flick’ together. The ‘flick’ distance depends on the stiffness of the cantilever and this in turn provides a direct measure of the surface forces. By using cantilevers of different stiffnesses the method has proved effective for separations ranging from 5 to 30 nm. The results show that for separations less than about 10 nm the forces operating are ‘normal’ van der Waals forces whilst for distances greater than 20 nm they are ‘retarded’ van der Waals forces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiple-beam interferometry of surfaces and films
Tolansky, S. (1948) · Cited by 740
Direct measurement of molecular attraction between solids separated by a narrow gap
Derjaguin, B. V., Abrikosova, I. I., & Lifshitz, E. M. (1956) · Quarterly Reviews, Chemical Society · doi:10.1039/qr9561000295 · Cited by 413
Measurements of retarded Van Der Waals' forces
Black, W., de Jongh, J. G. V., Overbeek, J. T. G., & Sparnaay, M. (1960) · Transactions of the Faraday Society · doi:10.1039/tf9605601597 · Cited by 157
Research works printed but not linked: 6
- Bowden F . P . & T abor D. 1964 The frictio n and Iubrication of solids p a rt 11 p. 413. O xford U niv ersity Press.
- Casimir H ., 1948, Proc. K . ned. A ka d, Wet., 51, 793
- Casimir H ., 1948, P hys, Rev., 73, 360
- de Boer J ., 1936, T rans, Faraday Soc., 32, 21
- 1954, Disc, Faraday Soc., 18, 33
- 1965, Thesis, Cam bridge U niversity, Phil. Mag., 43, 538
Cited by
Binnig, G., Quate, C. F., & Gerber, C. (1986) · Physical Review Letters · doi:10.1103/physrevlett.56.930 · Cited by 14,762
Calibration of atomic-force microscope tips
Hutter, J. L., & Bechhoefer, J. (1993) · Review of Scientific Instruments · doi:10.1063/1.1143970 · Cited by 4,194
THE CASE FOR A POSITIVE COSMOLOGICAL Λ-TERM
SAHNI, V., & STAROBINSKY, A. (2000) · International Journal of Modern Physics D · doi:10.1142/s0218271800000542 · Cited by 2,767
Advances in atomic force microscopy
Giessibl, F. J. (2003) · Reviews of Modern Physics · doi:10.1103/revmodphys.75.949 · Cited by 2,278
Nanotribology: friction, wear and lubrication at the atomic scale
Bhushan, B., Israelachvili, J. N., & Landman, U. (1995) · Nature · doi:10.1038/374607a0 · Cited by 1,601
Metadata
- Authors
- Tabor, D., & Winterton, R. H. S.
- Venue
- Proceedings of the Royal Society of London. A. Mathematical and Physical Sciences
- Publisher
- The Royal Society
- Published
- 1969-09-30
- Volume
- 312
- Issue
- 1511
- Pages
- 435-450
- ISSN
- 0080-4630 (ISSN-L)
- 2053-9169
- OpenAlex
- W2014581311
- Cited by
- 792
- References
- 3
- FWCI
- 3.29
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- royalsociety.org/journals/ethics-policies/data-sharing-mining/ (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.