The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime ( t ′) yttria-stabilized zirconia
Abstract
This article investigates the toughness of yttria-stabilized zirconia (YSZ) with the tetragonal-prime ( t ′) structure. Such materials are used as durable thermal barriers in gas turbines. Their durability has been attributed to high toughness, relative to materials in the cubic phase field. Based on prior literature, a ferroelastic toughening mechanism is hypothesized and this assertion is examined by characterizing the material in the wake of an indentation-induced crack. Assessment by transmission electron microscopy, Raman spectroscopy and optical interferometry has affirmed the existence of a process zone, approximately 3 μm in width, containing a high density of nano-scale domains, with equal proportions of all three crystallographic variants. Outside the zone, individual grains contain a single variant (no domains) implying that the toughening mechanism is controlled by domain nucleation (rather than the motion of pre-existing twin boundaries). The viability of the ferroelastic toughening mechanism is assessed using a process zone model that relates the observed toughening to the stress/strain hysteresis accompanying domain formation. Based on the measured process zone size, the known tetragonality of t ′-7 wt% YSZ and the enhancement in toughness relative to cubic YSZ, consistency between the model and the observed toughening is demonstrated for a reasonable choice of the coercive stress.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Anstis, G. R., Chantikul, P., Lawn, B. R., & Marshall, D. B. (1981) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1981.tb10320.x · Cited by 5,653
Lawn, B. (1993) · Cambridge University Press eBooks · doi:10.1017/cbo9780511623127 · Cited by 4,759
Fracture Toughness Determinations by Indentation
Evans, A. G., & Charles, E. A. (1976) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1976.tb10991.x · Cited by 2,356
Self-citationMechanisms controlling the durability of thermal barrier coatings
Evans, A. G., Mumm, D. R., Hutchinson, J. W., Meier, G. H., & Pettit, F. S. (2001) · Progress in Materials Science · doi:10.1016/s0079-6425(00)00020-7 · Cited by 2,339
Self-citationPerspective on the Development of High‐Toughness Ceramics
Evans, A. G. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb06493.x · Cited by 1,625
Self-citationMaterials Design for the Next Generation Thermal Barrier Coatings
Clarke, D. R., & Levi, C. G. (2003) · Annual Review of Materials Research · doi:10.1146/annurev.matsci.33.011403.113718 · Cited by 1,285
Self-citationDirect Observation and Analysis of Indentation Cracking in Glasses and Ceramics
Cook, R. F., & Pharr, G. M. (1990) · Journal of the American Ceramic Society · doi:10.1111/j.1151-2916.1990.tb05119.x · Cited by 1,071
Evans, A. G., & Cannon, R. M. (1986) · Acta Metallurgica · doi:10.1016/0001-6160(86)90052-0 · Cited by 632
Self-citationTransformation Toughening of Ceramics
Green, D. J., Hannink, R. H. J., & Swain, M. V. (2018) · CRC Press eBooks · doi:10.1201/9781351077408 · Cited by 585
Borom, M. P., Johnson, C. A., & Peluso, L. A. (1996) · Surface and Coatings Technology · doi:10.1016/s0257-8972(96)02994-5 · Cited by 433
Cited by
Nanoscale thermal transport. II. 2003–2012
Cahill, D. G., Braun, P. V., Chen, G., Clarke, D. R., Fan, S., Goodson, K. E., Keblinski, P., King, W. P., Mahan, G. D., Majumdar, A., et al. (2014) · Applied Physics Reviews · doi:10.1063/1.4832615 · Cited by 1,763
Self-citationThe Tetragonal‐Monoclinic Transformation in Zirconia: Lessons Learned and Future Trends
Chevalier, J., Gremillard, L., Virkar, A. V., & Clarke, D. R. (2009) · Journal of the American Ceramic Society · doi:10.1111/j.1551-2916.2009.03278.x · Cited by 1,609
Self-citationDefect engineering in development of low thermal conductivity materials: A review
Zhao, M., Pan, W., Wan, C., Qu, Z., Li, Z., & Yang, J. (2017) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2016.07.036 · Cited by 374
Metadata
- Authors
- Mercer, C., Williams, J. R., Clarke, D. R., & Evans, A. G.
- Venue
- Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences
- Publisher
- The Royal Society
- Published
- 2007-03-06
- Volume
- 463
- Issue
- 2081
- Pages
- 1393-1408
- ISSN
- 1364-5021 (ISSN-L)
- 1471-2946
- OpenAlex
- W2155426662
- Cited by
- 263
- References
- 13
- FWCI
- 6.00
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime ( t ′) yttria-stabilized zirconia. https://app.cochat.ai/papers/10.1098/rspa.2007.1829
- The paper
- Mercer, C., Williams, J. R., Clarke, D. R., & Evans, A. G. (2007). On a ferroelastic mechanism governing the toughness of metastable tetragonal-prime ( t ′) yttria-stabilized zirconia. Proceedings of the Royal Society A: Mathematical, Physical and Engineering Sciences. https://doi.org/10.1098/rspa.2007.1829
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.