Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 249

The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.

Controlled Sputtering of Metals by Low-Energy Hg Ions

Wehner, Gottfried K. · 1956 · Physical Review

Abstract

Sputtering has been studied under well controlled conditions, i.e., low gas pressure (1 micron), defined energy (up to 300 ev) and angle of incidence of the bombarding ions, and high ion-current density (10 ma/${\mathrm{cm}}^{2}$), by immersing the target in a low-pressure Hg plasma of high density created in a pool-type vacuum arc.It turned out that threshold energies (minimum ion energy for sputtering to ensue) are considerably lower under oblique than under normal incidence, and the atoms are ejected away from the direction of incidence. Thresholds were measured for twenty-three metals under normal incident Hg-ion bombardment. They follow, without exception a simple law: The product of the momentum transferred at threshold from ion to target surface atom and the sound velocity of the target material is proportional to the heat of sublimation of the target material. The threshold energies to be expected accordingly in the case of rare gas ion bombardment under normal incidence are tabulated. The yield (atoms per ion) $\mathrm{vs}$ ion energy was carefully measured for the case of polycrystalline Pt. When metal single crystals were sputtered, it was discovered that atoms are preferentially ejected in the directions of closest packing, that is [110] in fcc, [111] in bcc and diamond lattice. Deposits sputtered from plane low-index surfaces of single crystals therefore form characteristic patterns. Their study reveals more details: At low ion energy, only such atoms are sputtered which have no obstructing neighbors in the way of a close-packed direction. At higher ion energy, additional atoms are set free from positions where neighbor atoms interfere. Such atoms deviate in a characteristic way from the directions of close packing. Most atoms sputtered in close-packed directions which are parallel to the surface are trapped again, causing growth of oriented hillocks. The possibility for crystal growth by sputtering was demonstrated in another experiment. Some characteristic features of the etch effects caused by sputtering are described.The basic process in sputtering at low ion energies is one of momentum transfer. The important parameters with respect to the gas discharge are ion energy, angle of incidence, and atomic weight of ion; on the target side they are the atomic weight, the elastic constants, crystal structure and orientation, the heat of sublimation, dislocations, and surface roughness. Many details need durther clarification, and the studies are being continued.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1103/physrev.102.690

Cites

1 of 1 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 249

Metadata

Authors
Wehner, G. K.
Venue
Physical Review
Published
1956-05-01
Volume
102
Issue
3
Pages
690-704
ISSN
0031-899X (ISSN-L)
OpenAlex
W2027478590
Cited by
249
References
1
FWCI
25.94
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.