The DOI matches its Crossref record; 97 of the 97 references it cites were found in a registry or an index.
Review Article: Tracing the recorded history of thin-film sputter deposition: From the 1800s to 2017
Open accessAbstract
Thin films, ubiquitous in today's world, have a documented history of more than 5000 years. However, thin-film growth by sputter deposition, which required the development of vacuum pumps and electrical power in the 1600s and the 1700s, is a much more recent phenomenon. First reported in the early 1800s, sputter deposition already dominated the optical-coating market by 1880. Preferential sputtering of alloys, sputtering of liquids, multitarget sputtering, and optical spectroscopy for process characterization were all described in the 1800s. Measurements of threshold energies and yields were carried out in the late 1800s, and yields in reasonable agreement with modern data were reported in the 1930s. Roll-to-roll sputter coating on flexible substrates was introduced in the mid-1930s, and the initial demonstration of sustained self-sputtering (i.e., sputtering without gas) was performed in 1970. The term magnetron dates to 1921, and the results of the first magnetron sputtering experiments were published in the late 1930s. The earliest descriptions of a parallel-plate magnetron were provided in a patent filed in 1962, rotatable magnetrons appeared in the early 1980s, and tunable “unbalanced” magnetron sputtering was developed in 1992. Two additional forms of magnetron sputtering evolved during the 1990s, both with the goal of efficiently ionizing sputter-ejected metal atoms: ionized-magnetron sputtering and high-power impulse magnetron sputtering, with the latter now being available in several variants. Radio frequency (rf) glow discharges were reported in 1891, with the initial results from rf deposition and etching experiments published in the 1930s. Modern capacitively-coupled rf sputtering systems were developed and modeled in the early 1960s, and a patent was filed in 1975 that led to pulsed-dc and mid-frequency-ac sputtering. The purposeful synthesis of metal-oxide films goes back to at least 1907, leading to early metal-oxide and nitride sputtering experiments in 1933, although the term “reactive sputtering” was not used in the literature until 1953. The effect of target oxidation on secondary-electron yields and sputtering rates was reported in 1940. The first kinetic models of reactive sputtering appeared in the 1960s; high-rate reactive sputtering, based on partial-pressure control, was developed in the early 1980s. While abundant experimental and theoretical evidence already existed in the late 1800s to the early 1900s demonstrating that sputtering is due to momentum transfer via ion-bombardment-induced near-surface collision cascades, the concept of sputtering resulting from local “impact evaporation” continued in the literature into the 1960s. Modern sputtering theory is based upon a linear-transport model published in 1969. No less than eight Nobel Laureates in Physics and Chemistry played major roles in the evolution of modern sputter deposition.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The adsorption of gases on plane surfaces of glass, mica and platinum
Langmuir, I. (1918) · Journal of the American Chemical Society · doi:10.1021/ja02242a004 · Cited by 23,242
CRC Handbook of Chemistry and Physics
P, D. (1992) · Journal of Molecular Structure · doi:10.1016/0022-2860(92)85083-s · Cited by 9,329
The tension of metallic films deposited by electrolysis
Stoney, G. G. (1909) · Proceedings of the Royal Society of London. Series A, Containing Papers of a Mathematical and Physical Character · doi:10.1098/rspa.1909.0021 · Cited by 4,872
Theory of Sputtering. I. Sputtering Yield of Amorphous and Polycrystalline Targets
Sigmund, P. (1969) · Physical Review · doi:10.1103/physrev.184.383 · Cited by 3,589
Thornton, J. A. (1974) · Journal of Vacuum Science and Technology · doi:10.1116/1.1312732 · Cited by 2,421
Thornton, J. A. (1977) · Annual Review of Materials Science · doi:10.1146/annurev.ms.07.080177.001323 · Cited by 2,188
X. The Bakerian Lecture. —Experimental relations of gold (and other metals) to light
Faraday, M. (1857) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1857.0011 · Cited by 2,123
Past achievements and future challenges in the development of optically transparent electrodes
Ellmer, K. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.282 · Cited by 2,090
Microstructural evolution during film growth
Petrov, I., Barna, P. B., Hultman, L., & Greene, J. E. (2003) · Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films · doi:10.1116/1.1601610 · Cited by 1,787
Self-citationComputer simulation of atomic-displacement cascades in solids in the binary-collision approximation
Robinson, M. T., & Torrens, I. M. (1974) · Physical review. B, Solid state · doi:10.1103/physrevb.9.5008 · Cited by 1,651
Cited by
Ros, C., Andreu, T., & Morante, J. R. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta02755c · Cited by 260
Metadata
- Authors
- Greene, J. E.
- Venue
- Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films
- Publisher
- American Vacuum Society
- Published
- 2017-09-01
- Volume
- 35
- Issue
- 5
- ISSN
- 0734-2101 (ISSN-L)
- 1520-8559
- OpenAlex
- W2753312755
- Cited by
- 343
- References
- 97
- FWCI
- 10.39
- Type
- journal article
- Language
- en
- Open access
- hybrid
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Review Article: Tracing the recorded history of thin-film sputter deposition: From the 1800s to 2017. https://app.cochat.ai/papers/10.1116/1.4998940
- The paper
- Greene, J. E. (2017). Review Article: Tracing the recorded history of thin-film sputter deposition: From the 1800s to 2017. Journal of Vacuum Science & Technology A: Vacuum, Surfaces, and Films. https://doi.org/10.1116/1.4998940
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.