The DOI matches its Crossref record; 21 of the 21 references it cites were found in a registry or an index.
Atomic-scale simulations of the mechanical deformation of nanocrystalline metals
Open accessAbstract
Nanocrystalline metals, i.e., metals in which the grain size is in the nanometer range, have a range of technologically interesting properties including increased hardness and yield strength. We present atomic-scale simulations of the plastic behavior of nanocrystalline copper. The simulations show that the main deformation mode is sliding in the grain boundaries through a large number of uncorrelated events, where a few atoms (or a few tens of atoms) slide with respect to each other. Little dislocation activity is seen in the grain interiors. The localization of the deformation to the grain boundaries leads to a hardening as the grain size is increased (reverse Hall-Petch effect), implying a maximum in hardness for a grain size above the ones studied here. We investigate the effects of varying temperature, strain rate, and porosity, and discuss the relation to recent experiments. At increasing temperatures the material becomes softer in both the plastic and elastic regime. Porosity in the samples result in a softening of the material; this may be a significant effect in many experiments.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Computer Simulation of Liquids
P, S., & J, K. (1988) · Journal of Molecular Liquids · doi:10.1016/0167-7322(88)80022-9 · Cited by 15,812
The Deformation and Ageing of Mild Steel: III Discussion of Results
Hall, E. O. (1951) · Proceedings of the Physical Society. Section B · doi:10.1088/0370-1301/64/9/303 · Cited by 7,872
Swope, W. C., Andersen, H. C., Berens, P. H., & Wilson, K. R. (1982) · The Journal of Chemical Physics · doi:10.1063/1.442716 · Cited by 4,051
Spatial Tessellations: Concepts and Applications of Voronoi Diagrams
Okabe, A., Boots, B. N., & Sugihara, K. (1992) · Cited by 3,546
Softening of nanocrystalline metals at very small grain sizes
Schiøtz, J., Di Tolla, F. D., & Jacobsen, K. W. (1998) · Nature · doi:10.1038/35328 · Cited by 1,733
Self-citationOn the validity of the hall-petch relationship in nanocrystalline materials
Chokshi, A. H., Rosen, A., Karch, J., & Gleiter, H. (1989) · Scripta Metallurgica · doi:10.1016/0036-9748(89)90342-6 · Cited by 1,214
Interatomic interactions in the effective-medium theory
Jacobsen, K. W., Norskov, J. K., & Puska, M. J. (1987) · Physical Review B · doi:10.1103/physrevb.35.7423 · Cited by 982
Self-citationElastic and tensile behavior of nanocrystalline copper and palladium
Sanders, P. G., Eastman, J. A., & Weertman, J. (1997) · Acta Materialia · doi:10.1016/s1359-6454(97)00092-x · Cited by 858
Hall-petch relation in nanocrystalline solids
Nieh, T. G., & Wadsworth, J. (1991) · Scripta Metallurgica et Materialia · doi:10.1016/0956-716x(91)90256-z · Cited by 714
The virial theorem and stress calculation in molecular dynamics
Tsai, D. H. (1979) · The Journal of Chemical Physics · doi:10.1063/1.437577 · Cited by 685
Cited by
A Maximum in the Strength of Nanocrystalline Copper
Schiøtz, J., & Jacobsen, K. W. (2003) · Science · doi:10.1126/science.1086636 · Cited by 1,479
Self-citationMicrostructural design of hard coatings
Mayrhofer, P. H., Mitterer, C., Hultman, L., & Clemens, H. (2006) · Progress in Materials Science · doi:10.1016/j.pmatsci.2006.02.002 · Cited by 1,008
Stacking fault energies and slip in nanocrystalline metals
Van Swygenhoven, H., Derlet, P. M., & Frøseth, A. G. (2004) · Nature Materials · doi:10.1038/nmat1136 · Cited by 997
Yamakov, V., Wolf, D., Phillpot, S. R., Mukherjee, A. K., & Gleiter, H. (2002) · Nature Materials · doi:10.1038/nmat700 · Cited by 989
Nanocrystalline materials and coatings
Tjong, S. C., & Chen, H. (2004) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2004.07.001 · Cited by 928
Modeling elastic and plastic deformations in nonequilibrium processing using phase field crystals
Elder, K. R., & Grant, M. (2004) · Physical Review E · doi:10.1103/physreve.70.051605 · Cited by 842
Structural characterization of deformed crystals by analysis of common atomic neighborhood
Tsuzuki, H., Branicio, P. S., & Rino, J. P. (2007) · Computer Physics Communications · doi:10.1016/j.cpc.2007.05.018 · Cited by 764
Wolf, D., Yamakov, V., Phillpot, S. R., Mukherjee, A., & Gleiter, H. (2005) · Acta Materialia · doi:10.1016/j.actamat.2004.08.045 · Cited by 738
Grain Boundaries and Dislocations
Van Swygenhoven, H. (2002) · Science · doi:10.1126/science.1071040 · Cited by 656
Grain-boundary sliding in nanocrystalline fcc metals
Van Swygenhoven, H., & Derlet, P. M. (2001) · Physical Review B · doi:10.1103/physrevb.64.224105 · Cited by 563
Recent advances of superhard nanocomposite coatings: a review
Zhang, S., Sun, D., Fu, Y., & Du, H. (2003) · Surface and Coatings Technology · doi:10.1016/s0257-8972(02)00903-9 · Cited by 492
Yamakov, V., Wolf, D., Salazar, M., Phillpot, S. R., & Gleiter, H. (2001) · Acta Materialia · doi:10.1016/s1359-6454(01)00167-7 · Cited by 413
Grain-boundary diffusion creep in nanocrystalline palladium by molecular-dynamics simulation
Yamakov, V., Wolf, D., Phillpot, S. R., & Gleiter, H. (2002) · Acta Materialia · doi:10.1016/s1359-6454(01)00329-9 · Cited by 404
Petrova, H., Perez Juste, J., Pastoriza-Santos, I., Hartland, G. V., Liz-Marzán, L. M., & Mulvaney, P. (2006) · Phys. Chem. Chem. Phys. · doi:10.1039/b514644e · Cited by 313
The Hall–Petch breakdown in nanocrystalline metals: A crossover to glass-like deformation
Trelewicz, J. R., & Schuh, C. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.020 · Cited by 297
COHERENT EXCITATION OF VIBRATIONAL MODES IN METALLIC NANOPARTICLES
Hartland, G. V. (2006) · Annual Review of Physical Chemistry · doi:10.1146/annurev.physchem.57.032905.104533 · Cited by 288
Mechanisms of grain growth in nanocrystalline fcc metals by molecular-dynamics simulation
Haslam, A. J., Phillpot, S. R., Wolf, D., Moldovan, D., & Gleiter, H. (2001) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(01)01266-7 · Cited by 263
Yamakov, V., Wolf, D., Phillpot, S. R., & Gleiter, H. (2003) · Acta Materialia · doi:10.1016/s1359-6454(03)00232-5 · Cited by 262
Metadata
- Authors
- Schiøtz, J., Vegge, T., Di Tolla, F. D., & Jacobsen, K. W.
- Venue
- Physical Review B
- Publisher
- American Physical Society (APS)
- Published
- 1999-11-01
- Volume
- 60
- Issue
- 17
- Pages
- 11971-11983
- ISSN
- 0163-1829 (ISSN-L)
- 1095-3795
- OpenAlex
- W2053727377
- Cited by
- 629
- References
- 21
- FWCI
- 9.72
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.