Rapid prototyping: energy and environment in the spotlight
Open accessThe DOI matches its Crossref record.
Abstract
Purpose: To discuss integration of the rapid prototyping environmental aspects with the primary focus on electrical energy consumption. Design/methodology/approach: Various manufacturing parameters have been tested on three rapid prototyping systems: Thermojet (3DS), FDM 3000 (Stratasys) and EOSINT M250 Xtended (EOS). The objective is to select sets of parameters for reduction of electrical energy consumption. For this, a part is manufactured in several orientations and positions in the chamber of these RP systems. For each test, the electrical power is noted. Finally, certain rules are proposed to minimize this electrical energy consumption during a job. Findings: It is important to minimize the manufacturing time but there is no general rule for optimization of electrical energy consumption. Each RP system must be tested with energy consumption considerations under the spotlight. Research limitations/implications: The work is only based on rapid prototyping processes. The objective is to take into consideration the complete life‐cycle of a rapid prototyped part: manufacturing of raw material as far as reprocessing of waste. Practical implications: Reduction of electrical energy consumption to complete a job. Originality/value: Currently, environmental aspects are not well studied in rapid prototyping.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Towards energy and resource efficient manufacturing: A processes and systems approach
Duflou, J. R., Sutherland, J. W., Dornfeld, D., Herrmann, C., Jeswiet, J., Kara, S., Hauschild, M., & Kellens, K. (2012) · CIRP Annals · doi:10.1016/j.cirp.2012.05.002 · Cited by 1,164
Additive manufacturing: Challenges, trends, and applications
Abdulhameed, O., Al-Ahmari, A., Ameen, W., & Mian, S. H. (2019) · Advances in Mechanical Engineering · doi:10.1177/1687814018822880 · Cited by 861
Huang, R., Riddle, M., Graziano, D., Warren, J., Das, S., Nimbalkar, S., Cresko, J., & Masanet, E. (2016) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2015.04.109 · Cited by 805
“Tooling life cycle case studies of large solid-to-cavity ratio, small solid-to-cavity ratio and remanufacturing are used compared to CNC machining Mognol et al., 2006 (Mognol et al., 2006) 3DPrinting / 7.56e13.”
MethodCosts and Cost Effectiveness of Additive Manufacturing
Thomas, D. S., & Gilbert, S. W. (2014) · doi:10.6028/nist.sp.1176 · Cited by 443
Faludi, J., Bayley, C., Bhogal, S., & Iribarne, M. (2015) · Rapid Prototyping Journal · doi:10.1108/rpj-07-2013-0067 · Cited by 431
Sustainability of additive manufacturing: An overview on its energy demand and environmental impact
Peng, T., Kellens, K., Tang, R., Chen, C., & Chen, G. (2018) · Additive Manufacturing · doi:10.1016/j.addma.2018.04.022 · Cited by 426
Cruz Sanchez, F. A., Boudaoud, H., Camargo, M., & Pearce, J. M. (2020) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2020.121602 · Cited by 410
Current status and future directions of fused filament fabrication
Singh, S., Singh, G., Prakash, C., & Ramakrishna, S. (2020) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2020.04.049 · Cited by 385
Yoon, H.-S., Lee, J.-Y., Kim, H.-S., Kim, M.-S., Kim, E.-S., Shin, Y.-J., Chu, W.-S., & Ahn, S.-H. (2014) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-014-0033-0 · Cited by 324
Kellens, K., Baumers, M., Gutowski, T. G., Flanagan, W., Lifset, R., & Duflou, J. R. (2017) · Journal of Industrial Ecology · doi:10.1111/jiec.12629 · Cited by 310
Environmental assessment of additive manufacturing in the automotive industry
Böckin, D., & Tillman, A.-M. (2019) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2019.04.086 · Cited by 307
Addressing sustainability in research on distributed production: an integrated literature review
Kohtala, C. (2015) · Journal of Cleaner Production · doi:10.1016/j.jclepro.2014.09.039 · Cited by 290
On the environmental impacts of 3D printing technology
Khosravani, M. R., & Reinicke, T. (2020) · Applied Materials Today · doi:10.1016/j.apmt.2020.100689 · Cited by 284
Kellens, K., Mertens, R., Paraskevas, D., Dewulf, W., & Duflou, J. R. (2017) · Procedia CIRP · doi:10.1016/j.procir.2016.11.153 · Cited by 282
Bourhis, F. L., Kerbrat, O., Hascoet, J.-Y., & Mognol, P. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-5151-2 · Cited by 269
Self-citationEnergy consumption in machining: Classification, prediction, and reduction strategy
Zhao, G. Y., Liu, Z. Y., He, Y., Cao, H. J., & Guo, Y. B. (2017) · Energy · doi:10.1016/j.energy.2017.05.110 · Cited by 253
Toward the design of functional foods and biobased products by 3D printing: A review
Portanguen, S., Tournayre, P., Sicard, J., Astruc, T., & Mirade, P.-S. (2019) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2019.02.023 · Cited by 193
Metadata
- Authors
- Mognol, P., Lepicart, D., & Perry, N.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2006-01-01
- Volume
- 12
- Issue
- 1
- Pages
- 26-34
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W1965482264
- Cited by
- 185
- References
- 0
- FWCI
- 0.94
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.