The DOI matches its Crossref record; 8 of the 8 references it cites were found in a registry or an index.
Digital material fabrication using mask‐image‐projection‐based stereolithography
Abstract
Purpose: The purpose of this paper is to present a mask‐image‐projection‐based stereolithography (MIP‐SL) process that can combine two base materials with various concentrations and structures to produce a solid object with desired material characteristics. Stereolithography is an additive manufacturing process in which liquid photopolymer resin is cross‐linked and converted to solid. The fabrication of digital material requires frequent resin changes during the building process. The process presented in this paper attempts to address the related challenges in achieving such fabrication capability. Design/methodology/approach: A two‐channel system design is presented for the multi‐material MIP‐SL process. In such a design, a coated thick film and linear motions in two axes are used to reduce the separation force of a cured layer. The material cleaning approach to thoroughly remove resin residue on built surfaces is presented for the developed process. Based on a developed testbed, experimental studies were conducted to verify the effectiveness of the presented process on digital material fabrication. Findings: The proposed two‐channel system can reduce the separation force of a cured layer by an order of magnitude in the bottom‐up projection system. The developed two‐stage cleaning approach can effectively remove resin residue on built surfaces. Several multi‐material designs have been fabricated to highlight the capability of the developed MIP‐SL process. Research limitations/implications: A proof‐of‐concept testbed has been developed. Its building speed and accuracy can be further improved. The tests were limited to the same type of liquid resins. In addition, the removal of trapped air is a challenge in the presented process. Originality/value: This paper presents a novel and a pioneering approach towards digital material fabrication based on the stereolithography process. This research contributes to the additive manufacturing development by significantly expanding the selection of base materials in fabricating solid objects with desired material characteristics.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Continuous-flow lithography for high-throughput microparticle synthesis
Dendukuri, D., Pregibon, D. C., Collins, J., Hatton, T. A., & Doyle, P. S. (2006) · Nature Materials · doi:10.1038/nmat1617 · Cited by 1,040
Multi‐nozzle deposition for construction of 3D biopolymer tissue scaffolds
Khalil, S., Nam, J., & Sun, W. (2005) · Rapid Prototyping Journal · doi:10.1108/13552540510573347 · Cited by 351
Multi-material stereolithography
Choi, J.-W., Kim, H.-C., & Wicker, R. (2011) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2010.10.003 · Cited by 303
Multi-material microstereolithography
Choi, J.-W., MacDonald, E. W., & Wicker, R. B. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-009-2434-8 · Cited by 149
Fabrication of three-dimensional scaffolds for heterogeneous tissue engineering
Han, L., Suri, S., Schmidt, C. E., & Chen, S. (2010) · Biomedical Microdevices · doi:10.1007/s10544-010-9425-2 · Cited by 77
On-line force monitoring of platform ascending rapid prototyping system
Huang, Y., & Jiang, C. (2004) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2004.05.015 · Cited by 75
Scheduling and process planning for multiple material stereolithography
Kim, H.-C., Choi, J. W., & Wicker, R. B. (2010) · Rapid Prototyping Journal · doi:10.1108/13552541011049243 · Cited by 44
Wicker, R. B., Medina, F., & Elkins, C. J. (2004) · scholarworks - UTEP (The University of Texas at El Paso) · doi:10.26153/tsw/7038 · Cited by 41
Cited by
The status, challenges, and future of additive manufacturing in engineering
Gao, W., Zhang, Y., Ramanujan, D., Ramani, K., Chen, Y., Williams, C. B., Wang, C. C. L., Shin, Y. C., Zhang, S., & Zavattieri, P. D. (2015) · Computer-Aided Design · doi:10.1016/j.cad.2015.04.001 · Cited by 2,631
Self-citationMomeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
Multimaterial 4D Printing with Tailorable Shape Memory Polymers
Ge, Q., Sakhaei, A. H., Lee, H., Dunn, C. K., Fang, N. X., & Dunn, M. L. (2016) · Scientific Reports · doi:10.1038/srep31110 · Cited by 1,160
The upcoming 3D-printing revolution in microfluidics
Bhattacharjee, N., Urrios, A., Kang, S., & Folch, A. (2016) · Lab on a Chip · doi:10.1039/c6lc00163g · Cited by 1,123
Au, A. K., Huynh, W., Horowitz, L. F., & Folch, A. (2016) · Angewandte Chemie International Edition · doi:10.1002/anie.201504382 · Cited by 788
Metadata
- Authors
- Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2013-04-19
- Volume
- 19
- Issue
- 3
- Pages
- 153-165
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2033807754
- Cited by
- 267
- References
- 8
- FWCI
- 20.74
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Digital material fabrication using mask‐image‐projection‐based stereolithography. https://app.cochat.ai/papers/10.1108/13552541311312148
- The paper
- Zhou, C., Chen, Y., Yang, Z., & Khoshnevis, B. (2013). Digital material fabrication using mask‐image‐projection‐based stereolithography. Rapid Prototyping Journal. https://doi.org/10.1108/13552541311312148
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.