The DOI matches its Crossref record.
The achievable mechanical properties of SLM produced Maraging Steel 300 components
Abstract
Purpose: Selective laser melting (SLM) is a process that produces near net shape parts from metallic powders. A concern with SLM-produced metals is the achievable materials performance with respect to mechanical properties. Particularly, three important aspects strongly affect the mechanical properties of the material: internal stresses resulting from steep temperature gradients and high cooling rates, the resulting microstructure and the occurrence of pores and flaws. Design/methodology/approach: This paper presents SLM-produced maraging steel 300 (18Ni-300), an iron-nickel steel alloy often used in applications where high fracture toughness and strength are required. The steel’s achievable tensile, crack growth and hardness properties and the manner in which these compare to the wrought counterpart are reported. In addition, this paper investigates the porosity distribution and achievable density, residual stress levels and post-processing procedures using heat-treatments. Findings: It is found that tensile properties, hardness and microstructure compare well to its wrought counterpart. Fatigue growth rates are also comparable, though they are influenced by residual stresses and microstructure. Originality/value: The investigation into the mechanical performance addresses two issues: the achievable mechanical properties and the understanding of the link between the manufacturing process and the achievable material performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
SLM lattice structures: Properties, performance, applications and challenges
Maconachie, T., Leary, M., Lozanovski, B., Zhang, X., Qian, M., Faruque, O., & Brandt, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108137 · Cited by 1,497
Steels in additive manufacturing: A review of their microstructure and properties
Bajaj, P., Hariharan, A., Kini, A., Kürnsteiner, P., Raabe, D., & Jägle, E. A. (2020) · Materials Science and Engineering: A · doi:10.1016/j.msea.2019.138633 · Cited by 1,020
Fayazfar, H., Salarian, M., Rogalsky, A., Sarker, D., Russo, P., Paserin, V., & Toyserkani, E. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.02.018 · Cited by 665
Progress and perspectives in laser additive manufacturing of key aeroengine materials
Tan, C., Weng, F., Sui, S., Chew, Y., & Bi, G. (2021) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2021.103804 · Cited by 520
Narasimharaju, S. R., Zeng, W., See, T. L., Zhu, Z., Scott, P., Jiang, X., & Lou, S. (2022) · Journal of Manufacturing Processes · doi:10.1016/j.jmapro.2021.12.033 · Cited by 508
Metadata
- Authors
- Hermann Becker, T., & Dimitrov, D.
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2016-04-18
- Volume
- 22
- Issue
- 3
- Pages
- 487-494
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2298400189
- Cited by
- 169
- References
- 0
- FWCI
- 11.51
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The achievable mechanical properties of SLM produced Maraging Steel 300 components. https://app.cochat.ai/papers/10.1108/rpj-08-2014-0096
- The paper
- Hermann Becker, T., & Dimitrov, D. (2016). The achievable mechanical properties of SLM produced Maraging Steel 300 components. Rapid Prototyping Journal. https://doi.org/10.1108/rpj-08-2014-0096
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.