Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission
The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Abstract
Purpose: Human space exploration to date has been limited to low Earth orbit and the moon. The International Space Station (ISS) provides a unique opportunity for researchers to prove out the technologies that will enable humans to safely live and work in space for longer periods and venture farther into the solar system. The ability to manufacture parts in-space rather than launch them from earth represents a fundamental shift in the current risk and logistics paradigm for human space exploration. The purpose of this mission is to prove out the fused deposition modeling (FDM) process in the microgravity environment, evaluate microgravity effects on the materials manufactured, and provide the first demonstration of on-demand manufacturing for space exploration. Design/methodology/approach: In 2014, NASA, in cooperation with Made in Space, Inc., launched a 3D printer to the ISS with the goal of evaluating the effect of microgravity on the fused deposition modeling (FDM) process and prove out the technology for use on long duration, long endurance missions where it could leveraged to reduce logistics requirements and enhance crew safety by enabling a rapid response capability. This paper presents the results of testing of the first phase of prints from the technology demonstration mission, where 21 parts where printed on orbit and compared against analogous specimens produced using the printer prior to its launch to ISS. Findings: Mechanical properties, dimensional variations, structural differences and chemical composition for ground and flight specimens are reported. Hypotheses to explain differences observed in ground and flight prints are also developed. Phase II print operations, which took place in June and July of 2016, and ground-based studies using a printer identical to the hardware on ISS, will serve to answer remaining questions about the phase I data set. Based on Phase I analyses, operating the FDM process in microgravity has no substantive effect on the material produced. Practical implications: Demonstrates that there is no discernable, engineering significant effect on operation of FDM in microgravity. Implication is that material characterization activities for this application can be ground-based. Originality/value: Summary of results of testing of parts from the first operation of 3D printing in a microgravity environment.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“It has also been proven to work well in low-gravity or zerogravity conditions [178,179].”
From A comprehensive review of lunar-based manufacturing and construction (2024) · cites this paper as [178]
Citations
Cites
Astm, I. (2007) · Medical Entomology and Zoology · Cited by 1,943
Effect of processing conditions on the bonding quality of FDM polymer filaments
Sun, Q., Rizvi, G. M., Bellehumeur, C. T., & Gu, P. (2008) · Rapid Prototyping Journal · doi:10.1108/13552540810862028 · Cited by 1,277
Anisotropic Mechanical Properties of ABS Parts Fabricated by Fused Deposition Modelling
Ziemian, C., Sharma, M., & Ziemi, S. (2012) · Mechanical Engineering · doi:10.5772/34233 · Cited by 387
Rodríguez, J. F., Thomas, J. P., & Renaud, J. E. (2001) · Rapid Prototyping Journal · doi:10.1108/13552540110395547 · Cited by 362
Characterization of the mesostructure of fused‐deposition acrylonitrile‐butadiene‐styrene materials
Rodriguez, J. F., Thomas, J. P., & Renaud, J. E. (2000) · Rapid Prototyping Journal · doi:10.1108/13552540010337056 · Cited by 226
Forster, A. M. (2015) · doi:10.6028/nist.ir.8059 · Cited by 152
The Effects of Microgravity on Extrusion Based Additive Manufacturing
Snyder, M., Dunn, J., & Gonzalez, E. (2013) · AIAA SPACE 2013 Conference and Exposition · doi:10.2514/6.2013-5439 · Cited by 61
Owens, A., & De Weck, O. (2016) · AIAA SPACE 2016 · doi:10.2514/6.2016-5394 · Cited by 53
Benefits of Additive Manufacturing for Human Exploration of Mars
Owens, A., Do, S., Kurtz, A., & Weck, O. L. D. (2015) · ThinkTech (Texas Tech University) · Cited by 18
3D Printing in Zero-G ISS Technology Demonstration
Werkheiser, N., & Edmunson, J. E. (2014) · NASA STI Repository (National Aeronautics and Space Administration) · Cited by 16
Self-citation
Research works printed but not linked: 4
- ASTM D638, 2014, Standard Test Method for Tensile Properties of Plastics
- ASTM D695, 2015, Standard Test Methods for Compressive Properties of Rigid Plastics
- 1989, Radiation chemistry of polymers, 1
- 2016, Summary Report on Phase I Results from the 3D Printing in Zero-G Technology Demonstration Mission: Volume I. NASA/TP-2016-219101
Cited by
Prater, T., Werkheiser, N., Ledbetter, F., Timucin, D., Wheeler, K., & Snyder, M. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-2827-7 · Cited by 173
Self-citationAdditive manufacturing for space: status and promises
Sacco, E., & Moon, S. K. (2019) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-019-03786-z · Cited by 159
Mechanical performances of continuous carbon fiber reinforced PLA composites printed in vacuum
Li, H., Liu, B., Ge, L., Chen, Y., Zheng, H., & Fang, D. (2021) · Composites Part B Engineering · doi:10.1016/j.compositesb.2021.109277 · Cited by 146
Wang, Y., Hao, L., Li, Y., Sun, Q., Sun, M., Huang, Y., Li, Z., Tang, D., Wang, Y., & Xiao, L. (2022) · Applied Clay Science · doi:10.1016/j.clay.2022.106673 · Cited by 139
Muravyev, N. V., Monogarov, K. A., Schaller, U., Fomenkov, I. V., & Пивкина, А. Н. (2019) · Propellants Explosives Pyrotechnics · doi:10.1002/prep.201900060 · Cited by 125
Metadata
- Authors
- Prater, T., Bean, Q., Werkheiser, N., Grguel, R., Beshears, R., Rolin, T., Huff, T., Ryan, R., Ledbetter, F., & Ordonez, E.
- Affiliations
- Marshall Space Flight Center (US)
- Venue
- Rapid Prototyping Journal
- Publisher
- Emerald
- Published
- 2017-10-17
- Volume
- 23
- Issue
- 6
- Pages
- 1212-1225
- ISSN
- 1355-2546 (ISSN-L)
- OpenAlex
- W2763038380
- Cited by
- 65
- References
- 10
- Citations by year
- 2026: 5 · 2025: 9 · 2024: 12 · 2023: 7 · 2022: 7 · 2021: 12 · 2020: 3 · 2019: 5 · 2018: 3 · 2017: 2
- FWCI
- 2.26
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.emerald.com/insight/site-policies (tdm)
- Locations
- Rapid Prototyping Journal (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Additive Manufacturing and 3D Printing Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Additive Manufacturing Materials and Processes
- Physical Sciences › Engineering › Building and Construction › Innovations in Concrete and Construction Materials
- Keywords
- fused deposition modeling, International Space Station, space manufacturing, mechanical properties, dimensional change, chemical composition, additive manufacturing in space
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission. https://app.cochat.ai/papers/10.1108/rpj-09-2016-0142
- The paper
- Prater, T., Bean, Q., Werkheiser, N., Grguel, R., Beshears, R., Rolin, T., Huff, T., Ryan, R., Ledbetter, F., & Ordonez, E. (2017). Analysis of specimens from phase I of the 3D printing in Zero G technology demonstration mission. Rapid Prototyping Journal. https://doi.org/10.1108/rpj-09-2016-0142
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.