The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
The atmospheric-pressure plasma jet: a review and comparison to other plasma sources
Abstract
Atmospheric-pressure plasmas are used in a variety of materials processes. Traditional sources include transferred arcs, plasma torches, corona discharges, and dielectric barrier discharges. In arcs and torches, the electron and neutral temperatures exceed 3000/spl deg/C and the densities of charge species range from 10/sup 16/-10/sup 19/ cm/sup -3/. Due to the high gas temperature, these plasmas are used primarily in metallurgy. Corona and dielectric barrier discharges produce nonequilibrium plasmas with gas temperatures between 50-400/spl deg/C and densities of charged species typical of weakly ionized gases. However, since these discharges are nonuniform, their use in materials processing is limited. Recently, an atmospheric-pressure plasma jet has been developed, which exhibits many characteristics of a conventional, low-pressure glow discharge. In the jet, the gas temperature ranges from 25-200/spl deg/C, charged-particle densities are 10/sup 11/-10/sup 12/ cm/sup -3/, and reactive species are present in high concentrations, i.e., 10-100 ppm. Since this source may be scaled to treat large areas, it could be used in applications which have been restricted to vacuum. In this paper, the physics and chemistry of the plasma jet and other atmospheric-pressure sources are reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
Principles of Plasma Discharges and Materials Processing
Lieberman, M. A., & Lichtenberg, A. J. (2005) · doi:10.1002/0471724254 · Cited by 4,748
Raizer, Y. P. (1991) · doi:10.1007/978-3-642-61247-3 · Cited by 3,106
Cited by
Laroussi, M. (2002) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2002.804220 · Cited by 760
Arc‐Free Atmospheric Pressure Cold Plasma Jets: A Review
Laroussi, M., & Akan, T. (2007) · Plasma Processes and Polymers · doi:10.1002/ppap.200700066 · Cited by 699
Stoffels, E., Flikweert, A. J., Stoffels, W. W., & Kroesen, G. M. W. (2002) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/11/4/304 · Cited by 616
Landmarks in the historical development of twenty first century food processing technologies
Misra, N. N., Koubaa, M., Roohinejad, S., Juliano, P., Alpas, H., Inácio, R. S., Saraiva, J. A., & Barba, F. J. (2017) · Food Research International · doi:10.1016/j.foodres.2017.05.001 · Cited by 312
Abd El-Aziz, M. F., Mahmoud, E. A., & Elaragi, G. M. (2014) · Journal of Stored Products Research · doi:10.1016/j.jspr.2014.03.002 · Cited by 65
Metadata
- Authors
- Schutze, A., Jeong, J. Y., Babayan, S. E., Park, J., Selwyn, G. S., & Hicks, R. F.
- Venue
- IEEE Transactions on Plasma Science
- Published
- 1998
- Volume
- 26
- Issue
- 6
- Pages
- 1685-1694
- ISSN
- 0093-3813 (ISSN-L)
- OpenAlex
- W2165759268
- Cited by
- 1,401
- References
- 3
- FWCI
- 5.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: The atmospheric-pressure plasma jet: a review and comparison to other plasma sources. https://app.cochat.ai/papers/10.1109/27.747887
- The paper
- Schutze, A., Jeong, J. Y., Babayan, S. E., Park, J., Selwyn, G. S., & Hicks, R. F. (1998). The atmospheric-pressure plasma jet: a review and comparison to other plasma sources. IEEE Transactions on Plasma Science. https://doi.org/10.1109/27.747887
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.
