The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
The atmospheric-pressure plasma jet: a review and comparison to other plasma sources
Abstract
Atmospheric-pressure plasmas are used in a variety of materials processes. Traditional sources include transferred arcs, plasma torches, corona discharges, and dielectric barrier discharges. In arcs and torches, the electron and neutral temperatures exceed 3000/spl deg/C and the densities of charge species range from 10/sup 16/-10/sup 19/ cm/sup -3/. Due to the high gas temperature, these plasmas are used primarily in metallurgy. Corona and dielectric barrier discharges produce nonequilibrium plasmas with gas temperatures between 50-400/spl deg/C and densities of charged species typical of weakly ionized gases. However, since these discharges are nonuniform, their use in materials processing is limited. Recently, an atmospheric-pressure plasma jet has been developed, which exhibits many characteristics of a conventional, low-pressure glow discharge. In the jet, the gas temperature ranges from 25-200/spl deg/C, charged-particle densities are 10/sup 11/-10/sup 12/ cm/sup -3/, and reactive species are present in high concentrations, i.e., 10-100 ppm. Since this source may be scaled to treat large areas, it could be used in applications which have been restricted to vacuum. In this paper, the physics and chemistry of the plasma jet and other atmospheric-pressure sources are reviewed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
CRC Handbook of Chemistry and Physics
(2016) · CRC Press eBooks · doi:10.1201/9781315380476 · Cited by 13,921
Principles of Plasma Discharges and Materials Processing
Lieberman, M. A., & Lichtenberg, A. J. (2005) · doi:10.1002/0471724254 · Cited by 4,748
Raizer, Y. P. (1991) · doi:10.1007/978-3-642-61247-3 · Cited by 3,106
Meek, J. M., & Craggs, J. D. (1953) · International Linear Collider · Cited by 1,525
Chang, J.-S., Lawless, P. A., & Yamamoto, T. (1991) · IEEE Transactions on Plasma Science · doi:10.1109/27.125038 · Cited by 945
Loeb, L. B. (1965) · University of California Press eBooks · doi:10.1525/9780520326538 · Cited by 540
Etching materials with an atmospheric-pressure plasma jet
Jeong, J. Y., Babayan, S. E., Tu, V. J., Park, J., Henins, I., Hicks, R. F., & Selwyn, G. S. (1998) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/7/3/005 · Cited by 316
Self-citationDeposition of silicon dioxide films with an atmospheric-pressure plasma jet
Babayan, S. E., Jeong, J., Tu, V. J., Park, J. S., Selwyn, G. S., & Hicks, R. F. (1998) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/7/3/006 · Cited by 287
Self-citationBoulos, M. I. (1991) · IEEE Transactions on Plasma Science · doi:10.1109/27.125032 · Cited by 228
Cited by
Plasma-surface modification of biomaterials
Chu, P. (2002) · Materials Science and Engineering: R: Reports · doi:10.1016/s0927-796x(02)00004-9 · Cited by 1,578
Atmospheric pressure plasmas: A review
Tendero, C., Tixier, C., Tristant, P., Desmaison, J., & Leprince, P. (2006) · Spectrochimica Acta Part B: Atomic Spectroscopy · doi:10.1016/j.sab.2005.10.003 · Cited by 1,553
Lu, X., Naidis, G. V., Laroussi, M., Reuter, S., Graves, D. B., & Ostrikov, K. (2016) · Physics Reports · doi:10.1016/j.physrep.2016.03.003 · Cited by 1,230
Low Temperature Plasma‐Based Sterilization: Overview and State‐of‐the‐Art
Laroussi, M. (2005) · Plasma Processes and Polymers · doi:10.1002/ppap.200400078 · Cited by 1,111
von Woedtke, T., Reuter, S., Masur, K., & Weltmann, K.-D. (2013) · Physics Reports · doi:10.1016/j.physrep.2013.05.005 · Cited by 848
Laroussi, M. (2002) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2002.804220 · Cited by 760
Low temperature atmospheric pressure plasma sources for microbial decontamination
Ehlbeck, J., Schnabel, U., Polak, M., Winter, J., von Woedtke, T., Brandenburg, R., von dem Hagen, T., & Weltmann, K.-D. (2011) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/44/1/013002 · Cited by 723
Arc‐Free Atmospheric Pressure Cold Plasma Jets: A Review
Laroussi, M., & Akan, T. (2007) · Plasma Processes and Polymers · doi:10.1002/ppap.200700066 · Cited by 699
Stoffels, E., Flikweert, A. J., Stoffels, W. W., & Kroesen, G. M. W. (2002) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/11/4/304 · Cited by 616
Bonded repair of composite aircraft structures: A review of scientific challenges and opportunities
Katnam, K. B., Da Silva, L. F. M., & Young, T. M. (2013) · Progress in Aerospace Sciences · doi:10.1016/j.paerosci.2013.03.003 · Cited by 610
Non-thermal plasma treatment of textiles
Morent, R., De Geyter, N., Verschuren, J., De Clerck, K., Kiekens, P., & Leys, C. (2008) · Surface and Coatings Technology · doi:10.1016/j.surfcoat.2007.12.027 · Cited by 596
Montie, T. C., Kelly-Wintenberg, K., & Roth, J. R. (2000) · IEEE Transactions on Plasma Science · doi:10.1109/27.842860 · Cited by 537
Reuter, S., von Woedtke, T., & Weltmann, K.-D. (2018) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aab3ad · Cited by 522
Microplasmas: Sources, Particle Kinetics, and Biomedical Applications
Iza, F., Kim, G. J., Lee, S. M., Lee, J. K., Walsh, J. L., Zhang, Y. T., & Kong, M. G. (2008) · Plasma Processes and Polymers · doi:10.1002/ppap.200700162 · Cited by 493
Atmospheric-pressure plasma sources: Prospective tools for plasma medicine
Weltmann, K. D., Kindel, E., von Woedtke, T., Hähnel, M., Stieber, M., & Brandenburg, R. (2010) · Pure and Applied Chemistry · doi:10.1351/pac-con-09-10-35 · Cited by 449
Cold atmospheric pressure air plasma jet for medical applications
Kolb, J. F., Mohamed, A.-A. H., Price, R. O., Swanson, R. J., Bowman, A., Chiavarini, R. L., Stacey, M., & Schoenbach, K. H. (2008) · Applied Physics Letters · doi:10.1063/1.2940325 · Cited by 430
Cold plasma interactions with enzymes in foods and model systems
Misra, N. N., Pankaj, S. K., Segat, A., & Ishikawa, K. (2016) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2016.07.001 · Cited by 422
Cold Atmospheric Plasma: methods of production and application in dentistry and oncology
Hoffmann, C., Berganza, C., & Zhang, J. (2013) · Medical Gas Research · doi:10.1186/2045-9912-3-21 · Cited by 412
A Review on Natural Fiber Reinforced Polymer Composite for Bullet Proof and Ballistic Applications
Nurazzi, N. M., Asyraf, M. R. M., Khalina, A., Abdullah, N., Aisyah, H. A., Rafiqah, S. A., Sabaruddin, F. A., Kamarudin, S. H., Norrrahim, M. N. F., Ilyas, R. A., et al. (2021) · Polymers · doi:10.3390/polym13040646 · Cited by 398
Atmospheric and room temperature plasma (ARTP) as a new powerful mutagenesis tool
Zhang, X., Zhang, X.-F., Li, H.-P., Wang, L.-Y., Zhang, C., Xing, X.-H., & Bao, C.-Y. (2014) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-014-5755-y · Cited by 381
Gaunt, L. F., Beggs, C. B., & Georghiou, G. E. (2006) · IEEE Transactions on Plasma Science · doi:10.1109/tps.2006.878381 · Cited by 342
Applications of cold plasma technology for microbiological safety in meat industry
Misra, N. N., & Jo, C. (2017) · Trends in Food Science & Technology · doi:10.1016/j.tifs.2017.04.005 · Cited by 340
Murakami, T., Niemi, K., Gans, T., O'Connell, D., & Graham, W. G. (2012) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/22/1/015003 · Cited by 324
Chemical modification of amino acids by atmospheric-pressure cold plasma in aqueous solution
Takai, E., Kitamura, T., Kuwabara, J., Ikawa, S., Yoshizawa, S., Shiraki, K., Kawasaki, H., Arakawa, R., & Kitano, K. (2014) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/47/28/285403 · Cited by 315
CH4–CO2 reforming by plasma – challenges and opportunities
Tao, X., Bai, M., Li, X., Long, H., Shang, S., Yin, Y., & Dai, X. (2011) · Progress in Energy and Combustion Science · doi:10.1016/j.pecs.2010.05.001 · Cited by 314
Landmarks in the historical development of twenty first century food processing technologies
Misra, N. N., Koubaa, M., Roohinejad, S., Juliano, P., Alpas, H., Inácio, R. S., Saraiva, J. A., & Barba, F. J. (2017) · Food Research International · doi:10.1016/j.foodres.2017.05.001 · Cited by 312
Laroussi, M., Lu, X., & Keidar, M. (2017) · Journal of Applied Physics · doi:10.1063/1.4993710 · Cited by 306
Niemi, K., Gathen, V. S.-V. D., & Döbele, H. F. (2005) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/14/2/021 · Cited by 305
Hofmann, S., van Gessel, A. F. H., Verreycken, T., & Bruggeman, P. (2011) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/20/6/065010 · Cited by 304
Kalia, S., Thakur, K., Celli, A., Kiechel, M. A., & Schauer, C. L. (2013) · Journal of Environmental Chemical Engineering · doi:10.1016/j.jece.2013.04.009 · Cited by 289
Physical Modification of Natural Fibers and Thermoplastic Films for Composites — A Review
Mukhopadhyay, S., & Fangueiro, R. (2009) · Journal of Thermoplastic Composite Materials · doi:10.1177/0892705708091860 · Cited by 286
Atmospheric pressure discharge filaments and microplasmas: physics, chemistry and diagnostics
Bruggeman, P., & Brandenburg, R. (2013) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/46/46/464001 · Cited by 283
Synergistic Effect of H2O2 and NO2 in Cell Death Induced by Cold Atmospheric He Plasma
Girard, P.-M., Arbabian, A., Fleury, M., Bauville, G., Puech, V., Dutreix, M., & Sousa, J. S. (2016) · Scientific Reports · doi:10.1038/srep29098 · Cited by 272
Nikiforov, A. Y., Leys, C., Gonzalez, M. A., & Walsh, J. L. (2015) · Plasma Sources Science and Technology · doi:10.1088/0963-0252/24/3/034001 · Cited by 268
Abd El-Aziz, M. F., Mahmoud, E. A., & Elaragi, G. M. (2014) · Journal of Stored Products Research · doi:10.1016/j.jspr.2014.03.002 · Cited by 65
Metadata
- Authors
- Schutze, A., Jeong, J. Y., Babayan, S. E., Park, J., Selwyn, G. S., & Hicks, R. F.
- Venue
- IEEE Transactions on Plasma Science
- Published
- 1998
- Volume
- 26
- Issue
- 6
- Pages
- 1685-1694
- ISSN
- 0093-3813 (ISSN-L)
- OpenAlex
- W2165759268
- Cited by
- 1,401
- References
- 14
- FWCI
- 5.09
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.