The DOI matches its Crossref record; 5 of the 5 references it cites were found in a registry or an index.
A direct torque-controlled interior permanent magnet synchronous motor drive incorporating field weakening
Abstract
This paper presents a new control scheme for wide speed range operation of interior permanent magnet synchronous motor drives, where both torque and stator flux linkage are directly controlled. The proposed scheme possesses some attractive features when compared to the conventional current-controlled drives. Current controllers followed by pulsewidth modulation or hysteresis comparators and coordinate transformation are not used. This eliminates the delays through these networks and offers the possibility of dispensing with the rotor position sensor for the electronic commutator, if the initial rotor position is known only approximately. The scheme incorporates all the usual control regimes, such as the maximum torque per ampere operation in constant torque region, the flux-weakening region, and operates the drive within the voltage and current limits of the motor/inverter. The control scheme has been verified by simulation and experimental tests with a prototype interior magnet motor. This paper describes the scheme in detail, followed by results of its implementation.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor
Takahashi, I., & Noguchi, T. (1986) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1986.4504799 · Cited by 3,407
Direct self-control (DSC) of inverter-fed induction machine
Depenbrock, M. (1988) · IEEE Transactions on Power Electronics · doi:10.1109/63.17963 · Cited by 1,705
Analysis of direct torque control in permanent magnet synchronous motor drives
Zhong, L., Rahman, M. F., Hu, W. Y., & Lim, K. W. (1997) · IEEE Transactions on Power Electronics · doi:10.1109/63.575680 · Cited by 951
Self-citationA high-performance inverter-fed drive system of an interior permanent magnet synchronous machine
Bose, B. K. (1988) · IEEE Transactions on Industry Applications · doi:10.1109/28.17470 · Cited by 293
Direct torque control of permanent magnet drives
French, C., & Acarnley, P. (2002) · IAS '95. Conference Record of the 1995 IEEE Industry Applications Conference Thirtieth IAS Annual Meeting · doi:10.1109/ias.1995.530302 · Cited by 205
Cited by
Tang, L., Zhong, L., Rahman, M. F., & Hu, Y. (2004) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2003.823170 · Cited by 365
Self-citationFoo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030815 · Cited by 198
Self-citation
Metadata
- Authors
- Rahman, M. F., Zhong, L., & Lim, K. W.
- Venue
- IEEE Transactions on Industry Applications
- Published
- 1998
- Volume
- 34
- Issue
- 6
- Pages
- 1246-1253
- ISSN
- 0093-9994 (ISSN-L)
- OpenAlex
- W4233967807
- Cited by
- 298
- References
- 5
- FWCI
- 0.49
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.