The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
A new fault location technique for two- and three-terminal lines
Abstract
A method for the computation of fault location in two- and three-terminal high voltage lines is presented. It is based on digital computation of the three-phase current and voltage 60/50 Hz phasors at the line terminals. The method is independent of fault type and insensitive to source impedance variation or fault resistance. Furthermore, it considers the synchronization errors in sampling the current and voltage waveforms at the different line terminals. The method can be used online following the operation of digital relays or offline using data transferred to a central processor from digital transient recording apparatus. The authors start with a two-terminal line to explain the principles and then present the technique for a three-terminal line. The technique was first tested using data obtained from a steady-state fault analysis program to evaluate the convergence, observability, and uniqueness of the solution. The technique was then tested using EMPT-generated transient data. The test results show the high accuracy of the technique.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Development of a New Type Fault Locator Using the One-Terminal Voltage and Current Data
Takagi, T., Yamakoshi, Y., Yamaura, M., Kondow, R., & Matsushima, T. (1982) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1982.317615 · Cited by 635
Sachdev, M. S., & Agarwal, R. (1988) · IEEE Transactions on Power Delivery · doi:10.1109/61.4237 · Cited by 235
Accurate fault location technique for power transmission lines
Johns, A. T., & Jamali, S. (1990) · IEE Proceedings C Generation, Transmission and Distribution · doi:10.1049/ip-c.1990.0054 · Cited by 232
Eriksson, L., Saha, M., & Rockefeller, G. (1985) · IEEE Transactions on Power Apparatus and Systems · doi:10.1109/tpas.1985.319058 · Cited by 229
A New Fault Location Algorithm for Radial Transmission Lines with Loads
Srinivasan, K., & St-Jacques, A. (1989) · IEEE Power Engineering Review · doi:10.1109/mper.1989.4310803 · Cited by 112
A new fault location algorithm for radial transmission lines with loads
Srinivasan, K., & St.-Jacques, A. (1989) · IEEE Transactions on Power Delivery · doi:10.1109/61.32658 · Cited by 94
Schweitzer, E. O. (1983) · Computers & Electrical Engineering · doi:10.1016/0045-7906(83)90013-7 · Cited by 52
Cited by
Smart Fault Location for Smart Grids
Kezunovic, M. (2011) · IEEE Transactions on Smart Grid · doi:10.1109/tsg.2011.2118774 · Cited by 380
Borghetti, A., Bosetti, M., Di Silvestro, M., Nucci, C. A., & Paolone, M. (2008) · IEEE Transactions on Power Systems · doi:10.1109/tpwrs.2008.919249 · Cited by 300
Fault Diagnosis for Electrical Systems and Power Networks: A Review
Furse, C. M., Kafal, M., Razzaghi, R., & Shin, Y.-J. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2020.2987321 · Cited by 296
Unsynchronized two-terminal fault location estimation
Novosel, D., Hart, D. G., Udren, E., & Garitty, J. (1996) · IEEE Transactions on Power Delivery · doi:10.1109/61.484009 · Cited by 270
Self-citation
Metadata
- Authors
- Girgis, A. A., Hart, D. G., & Peterson, W. L.
- Venue
- IEEE Transactions on Power Delivery
- Published
- 1992
- Volume
- 7
- Issue
- 1
- Pages
- 98-107
- ISSN
- 0885-8977 (ISSN-L)
- OpenAlex
- W1965481914
- Cited by
- 374
- References
- 7
- FWCI
- 3.44
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A new fault location technique for two- and three-terminal lines. https://app.cochat.ai/papers/10.1109/61.108895
- The paper
- Girgis, A. A., Hart, D. G., & Peterson, W. L. (1992). A new fault location technique for two- and three-terminal lines. IEEE Transactions on Power Delivery. https://doi.org/10.1109/61.108895
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.