The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Direct self-control (DSC) of inverter-fed induction machine
Abstract
The new direct self-control (DSC) is a simple method of signal processing that gives converter-fed three-phase machines an excellent dynamic performance. To control the torque of, say, an induction motor, it is sufficient to process the measured signals of the stator currents and the total flux linkages only. In the basic version of DSC, the power semiconductors of a three-phase voltage source inverter are directly switched on and off via three Schmitt triggers, comparing the time integrals of line-to-line voltages to a reference value of desired flux, if the torque has not yet reached an upper-limit value of a two-limit torque control. Optimal performance of drive systems is accomplished in steady state as well as under transient conditions by combination of several two-limit controls.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A New Quick-Response and High-Efficiency Control Strategy of an Induction Motor
Takahashi, I., & Noguchi, T. (1986) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1986.4504799 · Cited by 3,407
Cited by
Multilevel inverters: a survey of topologies, controls, and applications
Rodriguez, J., Lai, J.-S., & Peng, F. Z. (2002) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2002.801052 · Cited by 6,715
Multilevel Voltage-Source-Converter Topologies for Industrial Medium-Voltage Drives
Rodriguez, J., Bernet, S., Wu, B., Pontt, J. O., & Kouro, S. (2007) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2007.907044 · Cited by 2,385
Control of parallel connected inverters in standalone AC supply systems
Chandorkar, M. C., Divan, D. M., & Adapa, R. (1993) · IEEE Transactions on Industry Applications · doi:10.1109/28.195899 · Cited by 1,766
Direct Torque Control of PWM Inverter-Fed AC Motors—A Survey
Buja, G. S., & Kazmierkowski, M. P. (2004) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2004.831717 · Cited by 1,267
FOC and DTC: two viable schemes for induction motors torque control
Casadei, D., Profumo, F., Serra, G., & Tani, A. (2002) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2002.802183 · Cited by 1,133
Metadata
- Authors
- Depenbrock, M.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1988-10
- Volume
- 3
- Issue
- 4
- Pages
- 420-429
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2150036352
- Cited by
- 1,705
- References
- 1
- FWCI
- 2.42
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.