The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
Switching converters with wide DC conversion range
Abstract
Compared to basic converter topologies (buck, boost, buck-boost, Cuk, etc.), pulse-width modulation (PWM) converters with quadratic DC conversion ratios, M(D)=D/sup 2/, M(D)=D/sup 2//(1-D) or M(D)=D/sup 2//(1-D)/sup 2/, offer a significantly wider conversion range. For a given minimum ON-time and, consequently, for a given minimum duty ratio D/sub min/, D/sup 2/ in the numerator of M(D) yields a much lower limit on the minimum attainable conversion ratio. By applying a systematic synthesis procedure, six novel single-transistor converter configurations with quadratic DC conversion ratios are found. The simpler, single-transistor realization is the most important advantage over the straightforward cascade of two basic converters. As far as conversion efficiency is concerned, it is clear that a single-stage converter is usually a better choice than a two-stage converter. The quadratic converters proposed are intended for applications where conventional single-stage converters are inadequate-for high-frequency applications where the specified range of input voltages and the specified range of output voltages call for an extremely large range of conversion ratios.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Cuk, S., & Middlebrook, R. D. (1977) · 1977 IEEE Power Electronics Specialists Conference · doi:10.1109/pesc.1977.7070802 · Cited by 439
Self-citationTransformerless DC-to-DC Converters with Large Conversion Ratios
Middlebrook, R. D. (1984) · INTELEC '84 - International Telecommunications Energy Conference · doi:10.1109/intlec.1984.4794165 · Cited by 159
The Cascade Connection of Switching Regulators
Matsuo, H., & Harada, K. (1976) · IEEE Transactions on Industry Applications · doi:10.1109/tia.1976.349401 · Cited by 125
Cited by
Axelrod, B., Berkovich, Y., & Ioinovici, A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916403 · Cited by 1,379
Pulse‐Width Modulated DC‐DC Power Converters
Kazimierczuk, M. K. (2008) · Wiley eBooks · doi:10.1002/9780470694640 · Cited by 1,109
Survey on non‐isolated high‐voltage step‐up dc–dc topologies based on the boost converter
Tofoli, F. L., Pereira, D. D. C., Josias de Paula, W., & Oliveira Júnior, D. D. S. (2015) · IET Power Electronics · doi:10.1049/iet-pel.2014.0605 · Cited by 591
A DC–DC multilevel boost converter
Rosas-Caro, J. C., Ramirez, J. M., Peng, F. Z., & Valderrabano, A. (2010) · IET Power Electronics · doi:10.1049/iet-pel.2008.0253 · Cited by 522
Overview of High-Step-Up Coupled-Inductor Boost Converters
Liu, H., Hu, H., Wu, H., Xing, Y., & Batarseh, I. (2016) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2016.2532930 · Cited by 432
A Family of Single-Switch PWM Converters With High Step-Up Conversion Ratio
Ismail, E. H., Al-Saffar, M. A., Sabzali, A. J., & Fardoun, A. A. (2008) · IEEE Transactions on Circuits and Systems I: Regular Papers · doi:10.1109/tcsi.2008.916427 · Cited by 359
Non-isolated buck–boost dc–dc converter with quadratic voltage gain ratio
Gorji, S. A., Mostaan, A., Tran My, H., & Ektesabi, M. (2019) · IET Power Electronics · doi:10.1049/iet-pel.2018.5703 · Cited by 109
Dehbonei, H., Lee, S. R., & Nehrir, H. (2009) · IEEE Transactions on Aerospace and Electronic Systems · doi:10.1109/taes.2009.4805261 · Cited by 53
Metadata
- Authors
- Maksimovic, D., & Cuk, S.
- Venue
- IEEE Transactions on Power Electronics
- Published
- 1991-01
- Volume
- 6
- Issue
- 1
- Pages
- 151-157
- ISSN
- 0885-8993 (ISSN-L)
- 1941-0107
- OpenAlex
- W2155495659
- Cited by
- 637
- References
- 3
- FWCI
- 0.92
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.