Student or educator? Sign up with your school email and get 6 months of Pro free.
Cited by 256

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

A bidirectional DC-DC converter topology for low power application

Jain, M., Daniele, M., Jain, P.K.·2000·IEEE Transactions on Power Electronics

Abstract

This paper presents a bidirectional DC-DC converter for use in low power applications. The proposed topology is based on a half-bridge on the primary and a current-fed push-pull on the secondary side of a high frequency isolation transformer. Achieving bidirectional flow of power using the same power components provides a simple, efficient and galvanically isolated topology that is specially attractive for use in battery charge/discharge circuits in DC UPS. The DC mains (provided by the AC mains), when presented, powers the down stream load converters and the bidirectional converter which essentially operates in the buck mode to charge the battery to a nominal value of 48 V. On failure of the DC mains (derived from the AC mains), the converter operation is comparable to that of a boost and the battery regulates the bus voltage and thereby provides power to the downstream converters. Small signal and steady state analyses are presented for this specific application. The design of a laboratory prototype is included. Experimental results from the prototype, under different operating conditions, validate and evaluate the proposed topology. An efficiency of 86.6% is achieved in the battery charging mode and 90% when the battery provides load power. The converter exhibits good transient response under load variations and switchover from one mode of operation to another.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/63.849029

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Cited by

See all 256

Metadata

Authors
Jain, M., Daniele, M., & Jain, P. K.
Venue
IEEE Transactions on Power Electronics
Published
2000-07
Volume
15
Issue
4
Pages
595-606
ISSN
  • 0885-8993 (ISSN-L)
  • 1941-0107
OpenAlex
W2162281450
Cited by
256
References
6
FWCI
3.46
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: A bidirectional DC-DC converter topology for low power application. https://app.cochat.ai/papers/10.1109/63.849029
The paper
Jain, M., Daniele, M., & Jain, P. K. (2000). A bidirectional DC-DC converter topology for low power application. IEEE Transactions on Power Electronics. https://doi.org/10.1109/63.849029

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.