The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Etch rates for micromachining processing
Abstract
The etch rates for 317 combinations of 16 materials (single-crystal silicon, doped, and undoped polysilicon, several types of silicon dioxide, stoichiometric and silicon-rich silicon nitride, aluminum, tungsten, titanium, Ti/W alloy, and two brands of positive photoresist) used in the fabrication of microelectromechanical systems and integrated circuits in 28 wet, plasma, and plasmaless-gas-phase etches (several HF solutions, H/sub 3/PO/sub 4/, HNO/sub 3/+H/sub 2/O+NH/sub 4/F, KOH, Type A aluminum etchant, H/sub 2/O+H/sub 2/O/sub 2/+HF, H/sub 2/O/sub 2/, piranha, acetone, HF vapor, XeF/sub 2/, and various combinations of SF/sub 6/, CF/sub 4/, CHF/sub 3/, Cl/sub 2/, O/sub 2/, N/sub 2/, and He in plasmas) were measured and are tabulated. Etch preparation, use, and chemical reactions (from the technical literature) are given. Sample preparation and MEMS applications are described for the materials.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2016) · CRC Press eBooks · doi:10.1201/9781315380476 · Cited by 13,921
Principles of Plasma Discharges and Materials Processing
Lieberman, M. A., & Lichtenberg, A. J. (2005) · doi:10.1002/0471724254 · Cited by 4,748
Shewmon, P. (2016) · Springer eBooks · doi:10.1007/978-3-319-48206-4 · Cited by 3,228
Silicon as a mechanical material
Petersen, K. E. (1982) · Proceedings of the IEEE · doi:10.1109/proc.1982.12331 · Cited by 2,902
Principles and prevention of corrosion
Walker, R. (1993) · Materials & Design · doi:10.1016/0261-3069(93)90066-5 · Cited by 2,427
Principles and prevention of corrosion
Jones, D. A. (1991) · Cited by 2,104
Seidel, H., Csepregi, L., Heuberger, A., & Baumgärtel, H. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086277 · Cited by 1,633
Silicon Processing for the VLSI Era
Wolf, S. M., & Tauber, R. N. (1986) · Medical Entomology and Zoology · Cited by 1,541
Diffusion in Solids, Liquids, Gases
Jost, W. (1952) · Zeitschrift für Physikalische Chemie · doi:10.1515/zpch-1952-2011-229 · Cited by 1,270
A Comprehensive Treatise on Inorganic and Theoretical Chemistry
(1931) · Journal of AOAC INTERNATIONAL · doi:10.1093/jaoac/14.1.118 · Cited by 1,259
Cleaning solutions based on hydrogen peroxide for use in silicon semiconductor technology
Kern, W. (1970) · Medical Entomology and Zoology · Cited by 812
Plasma etching—A discussion of mechanisms
Coburn, J. W., & Winters, H. F. (1979) · Journal of Vacuum Science and Technology · doi:10.1116/1.569958 · Cited by 613
Plasma etching : an introduction
Manos, D. M., & Flamm, D. L. (1989) · Cited by 496
Anisotropic etching of silicon in TMAH solutions
Tabata, O., Asahi, R., Funabashi, H., Shimaoka, K., & Sugiyama, S. (1992) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(92)80139-t · Cited by 466
Anisotropic Etching of Crystalline Silicon in Alkaline Solutions: II . Influence of Dopants
Seidel, H., Csepregi, L., Heuberger, A., & Baumgärtel, H. (1990) · Journal of The Electrochemical Society · doi:10.1149/1.2086278 · Cited by 385
Chemical Etching of Silicon: IV . Etching Technology
Schwartz, B., & Robbins, H. (1976) · Journal of The Electrochemical Society · doi:10.1149/1.2132721 · Cited by 354
The condensed chemical dictionary
(1956) · Journal of the Franklin Institute · doi:10.1016/0016-0032(56)90100-4 · Cited by 237
Silicon nitride single-layer x-ray mask
Sekimoto, M., Yoshihara, H., & Ohkubo, T. (1982) · Journal of Vacuum Science and Technology · doi:10.1116/1.571854 · Cited by 188
The condensed chemical dictionary
D.C.F (1972) · The Chemical Engineering Journal · doi:10.1016/0300-9467(72)85043-3 · Cited by 146
A Comprehensive Treatise on Inorganic and Theoretical Chemistry
Armstrong, H. E. (1926) · Nature · doi:10.1038/117683a0 · Cited by 66
Flexible, dry-released process for aluminum electrostatic actuators
Storment, C. W., Borkholder, D. A., Westerlind, V. A., et al. (1994) · Journal of Microelectromechanical Systems · doi:10.1109/84.311558 · Cited by 59
Permeable Polysilicon Etch-access Windows For Microshell Fabrication
Lebouitz, K., Howe, R. T., & Pisano, A. P. (2005) · International Conference on Solid-State Sensors, Actuators and Microsystems · doi:10.1109/sensor.1995.717149 · Cited by 43
Cited by
Etch rates for micromachining processing-part II
Williams, K. R., Gupta, K., & Wasilik, M. (2003) · Journal of Microelectromechanical Systems · doi:10.1109/jmems.2003.820936 · Cited by 1,027
Self-citationBulk micromachining of silicon
Kovacs, G. T. A., Maluf, N. I., & Petersen, K. E. (1998) · Proceedings of the IEEE · doi:10.1109/5.704259 · Cited by 733
An Introduction to Microelectromechanical Systems Engineering
Maluf, N. (2002) · Measurement Science and Technology · doi:10.1088/0957-0233/13/2/701 · Cited by 694
Piezoelectric MEMS sensors: state-of-the-art and perspectives
Tadigadapa, S., & Mateti, K. (2009) · Measurement Science and Technology · doi:10.1088/0957-0233/20/9/092001 · Cited by 581
Adhesion Forces Measured by Atomic Force Microscopy in Humid Air
Sedin, D. L., & Rowlen, K. L. (2000) · Analytical Chemistry · doi:10.1021/ac991198c · Cited by 252
Metadata
- Authors
- Williams, K. R., & Muller, R. S.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 1996
- Volume
- 5
- Issue
- 4
- Pages
- 256-269
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2110070104
- Cited by
- 646
- References
- 22
- FWCI
- 7.28
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.