The DOI matches its Crossref record; 10 of the 10 references it cites were found in a registry or an index.
Thin film shape memory alloy microactuators
Abstract
Thin film shape memory alloys (SMAs) have the potential to become a primary actuating mechanism for mechanical devices with dimensions in the micron-to-millimeter range requiring large forces over long displacements. The work output per volume of thin film SMA microactuators exceeds that of other microactuation mechanisms such as electrostatic, magnetic, thermal bimorph, piezoelectric, and thermopneumatic, and it is possible to achieve cycling frequencies on the order of 100 Hz due to the rapid heat transfer rates associated with thin film devices. In this paper, a quantitative comparison of several microactuation schemes is made, techniques for depositing and characterizing Ni-Ti-based shape memory films are evaluated, and micromachining and design issues for SMA microactuators are discussed. The substrate curvature method is used to investigate the thermo-mechanical properties of Ni-Ti-Cu SMA films, revealing recoverable stresses up to 510 MPa, transformation temperatures above 32/spl deg/C, and hysteresis widths between 5 and 13/spl deg/C. Fatigue data shows that for small strains, applied loads up to 350 MPa can be sustained for thousands of cycles. Two micromachined shape memory-actuated devices-a microgripper and microvalve-also are presented.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Analysis of Bi-Metal Thermostats
Timoshenko, S. (1925) · Journal of the Optical Society of America · doi:10.1364/josa.11.000233 · Cited by 2,426
Calculated elastic constants for stress problems associated with semiconductor devices
Brantley, W. A. (1973) · Journal of Applied Physics · doi:10.1063/1.1661935 · Cited by 1,203
Stress-related effects in thin films
Thornton, J. A., & Hoffman, D. W. (1989) · Thin Solid Films · doi:10.1016/0040-6090(89)90030-8 · Cited by 1,172
Engineering aspects of shape memory alloys
Savage, S. J. (1991) · International Materials Reviews · doi:10.1179/imr.1991.36.1.273 · Cited by 472
A comparison of muscle with artificial actuators
Hunter, I. W., & Lafontaine, S. (2003) · Technical Digest IEEE Solid-State Sensor and Actuator Workshop · doi:10.1109/solsen.1992.228297 · Cited by 263
Micro/miniature shape memory alloy actuator
Ikuta, K. (2002) · Proceedings., IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1990.126323 · Cited by 215
Shape-memory properties in Ni-Ti sputter-deposited film
Busch, J. D., Johnson, A. D., Lee, C. H., & Stevenson, D. A. (1990) · Journal of Applied Physics · doi:10.1063/1.346914 · Cited by 214
Thin-film processing of TiNi shape memory alloy
Walker, J. A., Gabriel, K. J., & Mehregany, M. (1990) · Sensors and Actuators A: Physical · doi:10.1016/0924-4247(90)85047-8 · Cited by 182
Vacuum-deposited TiNi shape memory film: characterization and applications in microdevices
Johnson, A. D. (1991) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/1/1/007 · Cited by 118
The Two-Way Shape Memory Effect
Perkins, J., & Hodgson, D. E. (1990) · Elsevier eBooks · doi:10.1016/b978-0-7506-1009-4.50021-4 · Cited by 43
Cited by
A review of shape memory alloy research, applications and opportunities
Mohd Jani, J., Leary, M., Subic, A., & Gibson, M. A. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.11.084 · Cited by 4,078
Shintake, J., Cacucciolo, V., Floreano, D., & Shea, H. (2018) · Advanced Materials · doi:10.1002/adma.201707035 · Cited by 1,938
A method for building self-folding machines
Felton, S., Tolley, M., Demaine, E., Rus, D., & Wood, R. (2014) · Science · doi:10.1126/science.1252610 · Cited by 967
TiNi-based thin films in MEMS applications: a review
Fu, Y., Du, H., Huang, W., Zhang, S., & Hu, M. (2004) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2004.02.019 · Cited by 783
Huang, W. M., Ding, Z., Wang, C. C., Wei, J., Zhao, Y., & Purnawali, H. (2010) · Materials Today · doi:10.1016/s1369-7021(10)70128-0 · Cited by 747
Metadata
- Authors
- Krulevitch, P., Lee, A. P., Ramsey, P. B., Trevino, J. C., Hamilton, J., & Northrup, M. A.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 1996
- Volume
- 5
- Issue
- 4
- Pages
- 270-282
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2001896868
- Cited by
- 529
- References
- 10
- FWCI
- 11.15
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.