CoChat

Design and batch fabrication of probes for sub-100 nm scanning thermal microscopy

Shi, L., Kwon, O., Miner, A.C., Majumdar, A. · 2001 · Journal of Microelectromechanical Systems
Cited by 114

The DOI matches its Crossref record.

Abstract

A batch fabrication process has been developed for making cantilever probes for scanning thermal microscopy (SThM) with spatial resolution in the sub-100 nm range. A heat transfer model was developed to optimize the thermal design of the probes. Low thermal conductivity silicon dioxide and silicon nitride were chosen for fabricating the probe tips and cantilevers, respectively, in order to minimize heat loss from the sample to the probe and to improve temperature measurement accuracy and spatial resolution. An etch process was developed for making silicon dioxide tips with tip radius as small as 20 nm. A thin film thermocouple junction was fabricated at the tip end with a junction height that could be controlled in the range of 100-600 nm. These thermal probes have been used extensively for thermal imaging of micro- and nano-electronic devices with a spatial resolution of 50 nm. This paper presents measurement results of the steady state and dynamic temperature responses of the thermal probes and examines the wear characteristics of the probes.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1109/84.946785

Cites

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cited by

See all 114

Metadata

Authors
Shi, L., Kwon, O., Miner, A. C., & Majumdar, A.
Venue
Journal of Microelectromechanical Systems
Published
2001
Volume
10
Issue
3
Pages
370-378
ISSN
1057-7157 (ISSN-L)
OpenAlex
W2098049879
Cited by
114
References
0
FWCI
9.20
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Design and batch fabrication of probes for sub-100 nm scanning thermal microscopy. https://app.cochat.ai/papers/10.1109/84.946785
The paper
Shi, L., Kwon, O., Miner, A. C., & Majumdar, A. (2001). Design and batch fabrication of probes for sub-100 nm scanning thermal microscopy. Journal of Microelectromechanical Systems. https://doi.org/10.1109/84.946785

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.