The DOI matches its Crossref record.
Measurements and modeling of two-phase flow in microchannels with nearly constant heat flux boundary conditions
Abstract
Two-phase forced convective flow in microchannels is promising for the cooling of integrated circuits. There has been limited research on boiling flow in channels with dimensions below 100 /spl mu/m, in which bubble formation and flow regimes can differ from those in larger channels. This work develops single and multi-channel experimental structures using plasma-etched silicon with pyrex glass cover, which allow uniform heating and spatially-resolved thermometry and provide optical access for visualization of boiling regimes. Boiling was observed with less than 5/spl deg/C of super-heating in rectangular channels with hydraulic diameters between 25 and 60 /spl mu/m. The channel wall widths are below 350 /spl mu/m, which minimizes solid conduction and reduces variations in the heat flux boundary condition. Pressure drop and wall temperature distribution data are consistent with predictions accounting for solid conduction and homogeneous two-phase convection.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Microfluidics: Fluid physics at the nanoliter scale
Squires, T. M., & Quake, S. R. (2005) · Reviews of Modern Physics · doi:10.1103/revmodphys.77.977 · Cited by 4,379
Laser, D. J., & Santiago, J. G. (2004) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/14/6/r01 · Cited by 1,848
Self-citationForced convective heat transfer across a pin fin micro heat sink
Peles, Y., Koşar, A., Mishra, C., Kuo, C.-J., & Schneider, B. (2005) · International Journal of Heat and Mass Transfer · doi:10.1016/j.ijheatmasstransfer.2005.03.017 · Cited by 473
Heat Transfer Mechanisms During Flow Boiling in Microchannels
Kandlikar, S. G. (2004) · Journal of Heat Transfer · doi:10.1115/1.1643090 · Cited by 459
Kandlikar, S. G. (2012) · Journal of Heat Transfer · doi:10.1115/1.4005126 · Cited by 389
Intelligent, self-powered, drug delivery systems
Patra, D., Sengupta, S., Duan, W., Zhang, H., Pavlick, R., & Sen, A. (2013) · Nanoscale · doi:10.1039/c2nr32600k · Cited by 375
Cooling Limits for GaN HEMT Technology
Won, Y., Cho, J., Agonafer, D., Asheghi, M., & Goodson, K. E. (2013) · 2013 IEEE Compound Semiconductor Integrated Circuit Symposium (CSICS) · doi:10.1109/csics.2013.6659222 · Cited by 57
Self-citationMicrochannel cooling strategies for high heat flux (1 kW/cm2) power electronic applications
Jung, K. W., Kharangate, C. R., Lee, H., Palko, J., Zhou, F., Asheghi, M., Dede, E. M., & Goodson, K. E. (2017) · 2017 16th IEEE Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITherm) · doi:10.1109/itherm.2017.7992457 · Cited by 39
Self-citation
Metadata
- Authors
- Zhang, L., Koo, J.-M., Jiang, L., Asheghi, M., Goodson, K. E., Santiago, J. G., & Kenny, T. W.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2002
- Volume
- 11
- Issue
- 1
- Pages
- 12-19
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2125156210
- Cited by
- 250
- References
- 0
- FWCI
- 63.03
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.