The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Ink-jet printed nanoparticle microelectromechanical systems
Abstract
Reports a method to additively build three-dimensional (3-D) microelectromechanical systems (MEMS) and electrical circuitry by ink-jet printing nanoparticle metal colloids. Fabricating metallic structures from nanoparticles avoids the extreme processing conditions required for standard lithographic fabrication and molten-metal-droplet deposition. Nanoparticles typically measure 1 to 100 nm in diameter and can be sintered at plastic-compatible temperatures as low as 300/spl deg/C to form material nearly indistinguishable from the bulk material. Multiple ink-jet print heads mounted to a computer-controlled 3-axis gantry deposit the 10% by weight metal colloid ink layer-by-layer onto a heated substrate to make two-dimensional (2-D) and 3-D structures. We report a high-Q resonant inductive coil, linear and rotary electrostatic-drive motors, and in-plane and vertical electrothermal actuators. The devices, printed in minutes with a 100 /spl mu/m feature size, were made out of silver and gold material with high conductivity,and feature as many as 400 layers, insulators, 10:1 vertical aspect ratios, and etch-released mechanical structure. These results suggest a route to a desktop or large-area MEMS fabrication system characterized by many layers, low cost, and data-driven fabrication for rapid turn-around time, and represent the first use of ink-jet printing to build active MEMS.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Size effect on the melting temperature of gold particles
Buffat, P., & Borel, J.-P. (1976) · Physical Review A · doi:10.1103/physreva.13.2287 · Cited by 3,362
Thermal microactuators for surface-micromachining processes
Comtois, J. H., Bright, V. M., & Phipps, M. W. (1995) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.221154 · Cited by 93
Cited by
Conductive Nanomaterials for Printed Electronics
Kamyshny, A., & Magdassi, S. (2014) · Small · doi:10.1002/smll.201303000 · Cited by 911
Inkjet printing as a deposition and patterning tool for polymers and inorganic particles
Tekin, E., Smith, P. J., & Schubert, U. S. (2008) · Soft Matter · doi:10.1039/b711984d · Cited by 807
Perelaer, J., Smith, P. J., Mager, D., Soltman, D., Volkman, S. K., Subramanian, V., Korvink, J. G., & Schubert, U. S. (2010) · Journal of Materials Chemistry · doi:10.1039/c0jm00264j · Cited by 736
Inkjet printing of nanosized silver colloids
Lee, H.-H., Chou, K.-S., & Huang, K.-C. (2005) · Nanotechnology · doi:10.1088/0957-4484/16/10/074 · Cited by 586
Direct writing of copper conductive patterns by ink-jet printing
Park, B. K., Kim, D., Jeong, S., Moon, J., & Kim, J. S. (2007) · Thin Solid Films · doi:10.1016/j.tsf.2006.11.142 · Cited by 555
Plastic-Compatible Low Resistance Printable Gold Nanoparticle Conductors for Flexible Electronics
Huang, D., Liao, F., Molesa, S., Redinger, D., & Subramanian, V. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1582466 · Cited by 524
Triggering the Sintering of Silver Nanoparticles at Room Temperature
Magdassi, S., Grouchko, M., Berezin, O., & Kamyshny, A. (2010) · ACS Nano · doi:10.1021/nn901868t · Cited by 509
Direct writing technology—Advances and developments
Hon, K. K. B., Li, L., & Hutchings, I. M. (2008) · CIRP Annals · doi:10.1016/j.cirp.2008.09.006 · Cited by 485
Conductive nanomaterials for 2D and 3D printed flexible electronics
Kamyshny, A., & Magdassi, S. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00738a · Cited by 469
2D‐Crystal‐Based Functional Inks
Bonaccorso, F., Bartolotta, A., Coleman, J. N., & Backes, C. (2016) · Advanced Materials · doi:10.1002/adma.201506410 · Cited by 446
Metal-based Inkjet Inks for Printed Electronics
Kamyshny, A. (2011) · The Open Applied Physics Journal · doi:10.2174/1874183501104010019 · Cited by 424
Sintubin, L., De Windt, W., Dick, J., Mast, J., van der Ha, D., Verstraete, W., & Boon, N. (2009) · Applied Microbiology and Biotechnology · doi:10.1007/s00253-009-2032-6 · Cited by 411
Direct Desktop Printed-Circuits-on-Paper Flexible Electronics
Zheng, Y., He, Z., Gao, Y., & Liu, J. (2013) · Scientific Reports · doi:10.1038/srep01786 · Cited by 370
Hohman, J. N., Kim, M., Wadsworth, G. A., Bednar, H. R., Jiang, J., LeThai, M. A., & Weiss, P. S. (2011) · Nano Letters · doi:10.1021/nl202728j · Cited by 326
Inkjet-printed silver tracks: low temperature curing and thermal stability investigation
Perelaer, B. J., de Laat, A. W. M., Hendriks, C. E., & Schubert, U. S. (2008) · Journal of Materials Chemistry · doi:10.1039/b720032c · Cited by 308
Thermal cure effects on electrical performance of nanoparticle silver inks
Greer, J. R., & Street, R. A. (2007) · Acta Materialia · doi:10.1016/j.actamat.2007.07.040 · Cited by 296
Classifications and Applications of Inkjet Printing Technology: A Review
Shah, M. A., Lee, D.-G., Lee, B.-Y., & Hur, S. (2021) · IEEE Access · doi:10.1109/access.2021.3119219 · Cited by 295
Luechinger, N. A., Athanassiou, E. K., & Stark, W. J. (2008) · Nanotechnology · doi:10.1088/0957-4484/19/44/445201 · Cited by 286
Silver Nanoparticles: Synthesis, Structure, Properties and Applications
Abbas, R., Luo, J., Qi, X., Naz, A., Khan, I. A., Liu, H., Yu, S., & Wei, J. (2024) · Nanomaterials · doi:10.3390/nano14171425 · Cited by 284
Eck, W., Craig, G., Sigdel, A., Ritter, G., Old, L. J., Tang, L., Brennan, M. F., Allen, P. J., & Mason, M. D. (2008) · ACS Nano · doi:10.1021/nn800429d · Cited by 280
Direct Printing of 1-D and 2-D Electronically Conductive Structures by Molten Lead-Free Solder
Wang, C.-H., Tsai, H.-L., & Hwang, W.-S. (2016) · Materials · doi:10.3390/ma10010001 · Cited by 271
Silver Nanoparticles as Pigments for Water-Based Ink-Jet Inks
Magdassi, S., Bassa, A., Vinetsky, Y., & Kamyshny, A. (2003) · Chemistry of Materials · doi:10.1021/cm021804b · Cited by 268
Argon plasma sintering of inkjet printed silver tracks on polymer substrates
Reinhold, I., Hendriks, C. E., Eckardt, R., Kranenburg, J. M., Perelaer, J., Baumann, R. R., & Schubert, U. S. (2009) · Journal of Materials Chemistry · doi:10.1039/b823329b · Cited by 259
Towards low-cost flexible substrates for nanoplasmonic sensing
Polavarapu, L., & Liz-Marzán, L. M. (2013) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp43642f · Cited by 257
Conductor microstructures by laser curing of printed gold nanoparticle ink
Chung, J., Ko, S., Bieri, N. R., Grigoropoulos, C. P., & Poulikakos, D. (2004) · Applied Physics Letters · doi:10.1063/1.1644907 · Cited by 252
Large‐Area Compliant Tactile Sensors Using Printed Carbon Nanotube Active‐Matrix Backplanes
Yeom, C., Chen, K., Kiriya, D., Yu, Z., Cho, G., & Javey, A. (2015) · Advanced Materials · doi:10.1002/adma.201404850 · Cited by 236
Metadata
- Authors
- Fuller, S. B., Wilhelm, E. J., & Jacobson, J. M.
- Venue
- Journal of Microelectromechanical Systems
- Published
- 2002
- Volume
- 11
- Issue
- 1
- Pages
- 54-60
- ISSN
- 1057-7157 (ISSN-L)
- OpenAlex
- W2158757477
- Cited by
- 594
- References
- 2
- FWCI
- 19.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.