The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.
Robust nonlinear speed control of PM synchronous motor using boundary layer integral sliding mode control technique
Abstract
A digital signal processor (DSP)-based robust nonlinear speed control of a permanent magnet synchronous motor (PMSM) is presented. A quasi-linearized and decoupled model including the influence of parameter variations and speed measurement error on the input-output feedback linearization of a PMSM is derived. Based on this model, a boundary layer integral sliding mode controller is designed and compared to a feedback linearization-based controller that uses proportional plus derivative (PD) controller in the outer loop. To show the validity of the proposed control scheme, DSP-based experimental works are carried out and compared with the conventional control scheme.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Slotine, J.-J. E., & Li, W. (1991) · CERN Document Server (European Organization for Nuclear Research) · Cited by 18,975
Variable structure control: a survey
Hung, J. Y., Gao, W., & Hung, J. C. (1993) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.184817 · Cited by 2,907
Leonhard, W. (1996) · Springer eBooks · doi:10.1007/978-3-642-97646-9 · Cited by 2,488
Nonlinear Control Systems: An Introduction
(1985) · Lecture Notes in Control and Information Sciences · doi:10.1007/bfb0006368 · Cited by 1,852
Integrator backstepping techniques for the tracking control of permanent magnet brush DC motors
Carroll, J. J., & Dawson, D. M. (1995) · IEEE Transactions on Industry Applications · doi:10.1109/28.370270 · Cited by 83
Integrator backstepping techniques for the tracking control of permanent magnet brush DC motors
Carroll, J. J., Schneider, M., & Dawson, D. M. (2002) · IEEE Industry Applications Society Annual Meeting (IAS) · doi:10.1109/ias.1993.298880 · Cited by 48
Cited by
Speed Control for PMSM Servo System Using Predictive Functional Control and Extended State Observer
Liu, H., & Li, S. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2011.2162217 · Cited by 774
Adaptive Speed Control for Permanent-Magnet Synchronous Motor System With Variations of Load Inertia
Li, S., & Liu, Z. (2009) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2024655 · Cited by 676
Foo, G., & Rahman, M. F. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2030820 · Cited by 367
Adaptive PID Speed Control Design for Permanent Magnet Synchronous Motor Drives
Jung, J.-W., Leu, V. Q., Do, T. D., Kim, E.-K., & Choi, H. H. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2311462 · Cited by 330
Neural Network-Based Adaptive Dynamic Surface Control for Permanent Magnet Synchronous Motors
Yu, J., Shi, P., Dong, W., Chen, B., & Lin, C. (2015) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2014.2316289 · Cited by 315
Metadata
- Authors
- Baik, I.-C., Kim, K.-H., & Youn, M.-J.
- Venue
- IEEE Transactions on Control Systems Technology
- Published
- 2000
- Volume
- 8
- Issue
- 1
- Pages
- 47-54
- ISSN
- 1063-6536 (ISSN-L)
- OpenAlex
- W2110497559
- Cited by
- 322
- References
- 6
- FWCI
- 4.33
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.