The DOI matches its Crossref record; 3 of the 3 references it cites were found in a registry or an index.
A generalized approach to partial discharge modeling
Abstract
An important tool for improving the reliability of HV insulation systems are partial discharge (PD) measurements. The interpretation of such measurements aims at extracting from the measured data information about insulation defects which then are used for estimating the risk of insulation failure of the equipment. Because the physical understanding of PD has made substantial progress in the last decade, it can now be exploited to support interpretation. In this paper a concept is presented which merges the available physical knowledge about various PD types into a generalized model which can be applied to arbitrary insulation defects. This approach will be restricted to PD of the streamer type in gases and at gas-insulator interfaces which cover a large fraction of the cases encountered in technical insulation systems. The generalized model allows us to derive approximate relations between defect characteristics, insulation design parameters and test conditions on one side, and measurable PD characteristics on the other. The inversion of these relations yields rules for extracting defect information from the PD data. The application of the generalized model is illustrated by two simple examples, namely, spherical voids in an insulator and electrode protrusions in SF/sub 6/.>
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
(2020) · Electromagnetic Processes · doi:10.2307/j.ctv131bv37.5 · Cited by 21,966
Electrical Degradation and Breakdown in Polymers
Dissado, L. A., & Fothergill, J. C. (1992) · Institution of Engineering and Technology eBooks · doi:10.1049/pbed009e · Cited by 1,795
Partial discharges in ellipsoidal and spheroidal voids
Crichton, G. C., Karlsson, P. W., & Pedersen, A. (1989) · IEEE Transactions on Electrical Insulation · doi:10.1109/14.90292 · Cited by 276
Cited by
Brandenburg, R. (2017) · Plasma Sources Science and Technology · doi:10.1088/1361-6595/aa6426 · Cited by 802
Partial discharges. Their mechanism, detection and measurement
Bartnikas, R. (2002) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2002.1038663 · Cited by 569
Measurement and simulation of PD in epoxy voids
Gutfleisch, F., & Niemeyer, L. (1995) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/94.469970 · Cited by 392
Self-citationEffect of supply voltage frequency on testing of insulation system
Cavallini, A., & Montanari, G. C. (2006) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2006.1593409 · Cited by 144
Partial discharge behavior and ground insulation life expectancy under different voltage frequencies
Liu, T., Li, Q., Huang, X., Lu, Y., Asif, M., & Wang, Z. (2018) · IEEE Transactions on Dielectrics and Electrical Insulation · doi:10.1109/tdei.2018.006810 · Cited by 83
Metadata
- Authors
- Niemeyer, L.
- Venue
- IEEE Transactions on Dielectrics and Electrical Insulation
- Published
- 1995
- Volume
- 2
- Issue
- 4
- Pages
- 510-528
- ISSN
- 1070-9878 (ISSN-L)
- OpenAlex
- W2143257327
- Cited by
- 751
- References
- 3
- FWCI
- 2.98
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.