Sensing the Crowds Using Bluetooth Low Energy Tags
Open accessThe DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
Sensing the crowds to understand crowd dynamics can be a challenging task. Passive sensing techniques such as camera-based sensing can provide flow detection, people counting, and density estimation, but they fail to provide accurate identification of individuals mobility patterns. Active techniques such as Radio Frequency Identification (RFID) tags given to people require expensive RFID readers deployed to perform sensing. In this paper, we propose to use Bluetooth low energy (BLE) tagging as an alternative method. When low-cost BLE tags are set in advertisement mode, they can be detected by smartphones. In this paper, we design an architecture for sensing the crowds by requiring a large population carrying relatively cheap off-the-shelf BLE proximity tags, and considerably fewer participants to run scanning application on their smartphones to collect data. We performed a large experimental deployment with 600 tags and ten smartphones conducted during the five days of the world largest annual gathering (The Hajj). We were able to achieve ~90% detectability rate while effectively reconstructing the routes of the participants.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Internet of Things: How the Next Evolution of the Internet Is Changing Everything
Evans, D. (2011) · Cited by 2,687
Mobile crowdsensing: current state and future challenges
Ganti, R., Ye, F., & Lei, H. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.6069707 · Cited by 2,054 · cited 1×
“This approach relays on the voluntary and enduring cooperation of users to produce meaningful data [18].”
BackgroundZhan, B., Monekosso, D. N., Remagnino, P., Velastin, S. A., & Xu, L.-Q. (2008) · Machine Vision and Applications · doi:10.1007/s00138-008-0132-4 · Cited by 541
Tracking unmodified smartphones using wi-fi monitors
Musa, A. B. M., & Eriksson, J. (2012) · Proceedings of the 10th ACM Conference on Embedded Network Sensor Systems · doi:10.1145/2426656.2426685 · Cited by 254 · cited 2×
“Some existing APs [14] and dedicated Wi-Fi monitors [15] easily eavesdrop and decode Wi-Fi frames to identify and track individual smartphones based on the uniqueMAC addresses embedded in each probe.”
BackgroundData-driven crowd analysis in videos
Rodriguez, M., Sivic, J., Laptev, I., & Audibert, J.-Y. (2011) · 2011 International Conference on Computer Vision · doi:10.1109/iccv.2011.6126374 · Cited by 203 · cited 3×
“Technologies such as computer vision [4], [6] can help in providing flow detection, people counting and density estimation, but they fail to provide accurate identification of individuals mobility patterns.”
BackgroundInfluentialCapturing crowd dynamics at large scale events using participatory GPS-localization
Blanke, U., Tröster, G., Franke, T., & Lukowicz, P. (2014) · International Conference on Intelligent Sensors, Sensor Networks and Information Processing · doi:10.1109/issnip.2014.6827652 · Cited by 107 · cited 3×
“Other applications collect location data from GPS sensors [12], [13], or other forms of localization techniques such as BLE, WiFi or 3G.”
BackgroundResultLow cost crowd counting using audio tones
Kannan, P. G., Venkatagiri, S. P., Chan, M. C., Ananda, A. L., & Peh, L.-S. (2012) · Proceedings of the 10th ACM Conference on Embedded Network Sensor Systems · doi:10.1145/2426656.2426673 · Cited by 97 · cited 2×
“In [17], the authors present a system that uses built-in microphones to sense smartphones by letting them exchange bit patterns encoded in audio tones.”
BackgroundCrowd Management with RFID and Wireless Technologies
Yamin, M., & Ades, Y. (2009) · doi:10.1109/netcom.2009.14 · Cited by 73 · cited 1×
“Active techniques such as RFID tags given to crowds can allow richer data about users mobility and behaviour but comes at an expensive cost for deploying RFID readers at points of data collection [5].”
BackgroundParticipatory Bluetooth Scans Serving as Urban Crowd Probes
Weppner, J., Lukowicz, P., Blanke, U., & Troster, G. (2014) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2360123 · Cited by 28 · cited 2×
“Other similar systems [16] capture bluetooth response frames from bluetooth enabled smartphones when set to advertisement mode.”
BackgroundPilgrims Tracking Using Wireless Sensor Network
Mohandes, M. A., Haleem, M. A., Abul-Hussain, A., & Balakrishnan, K. (2011) · International Conference on Advanced Information Networking and Applications Workshops (WAINA) · doi:10.1109/waina.2011.123 · Cited by 25 · cited 1×
“The authors in [8] and [9] described two alternative systems for tracking and monitoring pilgrims during Hajj.”
BackgroundCrowdsensing traces using bluetooth low energy (BLE) proximity tags
Jamil, S., Basalamah, A. M., & Lbath, A. (2014) · ACM International Joint Conference on Pervasive and Ubiquitous Computing (UbiComp) · doi:10.1145/2638728.2638760 · Cited by 17 · cited 1×
“extended our previous work in [7] with detailed results and discussions.”
ResultSelf-citationWirz, M., Mitleton‐Kelly, E., Franke, T., Camilleri, V., Montebello, M., Roggen, D., Lukowicz, P., & Tröster, G. (2013) · Understanding complex systems · doi:10.1007/978-3-642-36614-7_4 · Cited by 15 · cited 3×
“Other applications collect location data from GPS sensors [12], [13], or other forms of localization techniques such as BLE, WiFi or 3G.”
BackgroundResultPilgrim Tracking and Identification Using Wireless Sensor Networks and GPS in a Mobile Phone
Mohandes, M. A., Haleem, M. A., Kousa, M. A., & Balakrishnan, K. (2013) · Arabian Journal for Science and Engineering · doi:10.1007/s13369-013-0572-7 · Cited by 15 · cited 2×
“The authors in [8] and [9] described two alternative systems for tracking and monitoring pilgrims during Hajj.”
BackgroundUnderstanding aspects of pilgrimage using social networks derived from smartphones
Muaremi, A., Bexheti, A., Gravenhorst, F., Seiter, J., Feese, S., Bert Arnrich, A., & Tröster, G. (2014) · Pervasive and Mobile Computing · doi:10.1016/j.pmcj.2014.06.006 · Cited by 13 · cited 2×
“The authors of [11] proposed a system understand the behaviors of pilgrims using social network analysis based on spatial proximity information.”
Background
Research works printed but not linked: 5
- mohandes, 2010, RFID-based system for pilgrims identification and tracking, Appl Comput Electromagn Soc J, 25, 273
- 2014, White Paper-CMX Analytics
- 2014, Bluetooth Specification V4 0
- 2016, The Hajj Wikipedia
- 2015, Driven by Standards in 2016 Wi-Fi Direct and BLE Protocols Will Ship in 2 and 2 9 Billion Devices Respectively
Cited by
Performance Evaluation of Bluetooth Low Energy: A Systematic Review
Tosi, J., Taffoni, F., Santacatterina, M., Sannino, R., & Formica, D. (2017) · Sensors · doi:10.3390/s17122898 · Cited by 243
“In this way, it is possible to send some pieces of information about the surrounding area [25], or to detect the user position [26–32], or to measure the distance between sensor devices in the environment [33,34], or also to detect the presence of devices, and so people [22,24,35–38].”
BackgroundSensing, communication and security planes: A new challenge for a smart city system design
Habibzadeh, H., Soyata, T., Kantarci, B., Boukerche, A., & Kaptan, C. (2018) · Computer Networks · doi:10.1016/j.comnet.2018.08.001 · Cited by 129
Digital Revolution for Hajj Crowd Management: A Technology Survey
Felemban, E. A., Rehman, F. U., Biabani, S. A. A., Ahmad, A., Naseer, A., Majid, A. R. M. A., Hussain, O. K., Qamar, A. M., Falemban, R., & Zanjir, F. (2020) · IEEE Access · doi:10.1109/access.2020.3037396 · Cited by 107
“Anas [48] proposed relatively cheap off-the-shelf BLE proximity tagging architecture as an alternative method to RFID tagging which needs deployment of expensive RFID readers.”
MethodSmart City System Design: A Comprehensive Study of the Application and Data Planes
Habibzadeh, H., Kaptan, C., Soyata, T., Kantarcı, B., & Boukerche, A. (2019) · ACM Computing Surveys · doi:10.1145/3309545 · Cited by 98
“InReference [11], the authors introduce an application that tracks a crowd of users in a high-density location using inexpensive coin battery-powered BLE-based tags, which operate up to a year without requiring a battery replacement.”
BackgroundDarsena, D., Gelli, G., Iudice, I., & Verde, F. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3223297 · Cited by 71
“BLE is proposed in [147], where a large population carry BLE proximity tags, acting as beacons, whose presence is sensed by smartphone carried by few volunteers.”
Background
Metadata
- Authors
- Basalamah, A.
- Affiliations
- Umm al-Qura University (SA)
- Corresponding author
- Basalamah, Anas
- ORCID
- Basalamah, Anas
- Venue
- IEEE Access
- Published
- 2016
- Volume
- 4
- Pages
- 4225-4233
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2513282446
- Cited by
- 49
- References
- 14
- Citations by year
- 2026: 1 · 2025: 6 · 2024: 4 · 2023: 3 · 2022: 4 · 2021: 3 · 2020: 6 · 2019: 9 · 2018: 8 · 2017: 5
- FWCI
- 6.92
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- KACST through the National Science and Technology and Innovation Plan" (11-INF2061-10)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Social Sciences › Transportation › Human Mobility and Location-Based Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Keywords
- crowdsensing, passive sensing, individual mobility patterns, smartphone scanning, route reconstruction, crowd dynamics, RFID alternative, Hajj pilgrimage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.