Sensing the Crowds Using Bluetooth Low Energy Tags
Open accessThe DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
Sensing the crowds to understand crowd dynamics can be a challenging task. Passive sensing techniques such as camera-based sensing can provide flow detection, people counting, and density estimation, but they fail to provide accurate identification of individuals mobility patterns. Active techniques such as Radio Frequency Identification (RFID) tags given to people require expensive RFID readers deployed to perform sensing. In this paper, we propose to use Bluetooth low energy (BLE) tagging as an alternative method. When low-cost BLE tags are set in advertisement mode, they can be detected by smartphones. In this paper, we design an architecture for sensing the crowds by requiring a large population carrying relatively cheap off-the-shelf BLE proximity tags, and considerably fewer participants to run scanning application on their smartphones to collect data. We performed a large experimental deployment with 600 tags and ten smartphones conducted during the five days of the world largest annual gathering (The Hajj). We were able to achieve ~90% detectability rate while effectively reconstructing the routes of the participants.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
The Internet of Things: How the Next Evolution of the Internet Is Changing Everything
Evans, D. (2011) · Cited by 2,687
Mobile crowdsensing: current state and future challenges
Ganti, R., Ye, F., & Lei, H. (2011) · IEEE Communications Magazine · doi:10.1109/mcom.2011.6069707 · Cited by 2,054 · cited 1×
“This approach relays on the voluntary and enduring cooperation of users to produce meaningful data [18].”
BackgroundZhan, B., Monekosso, D. N., Remagnino, P., Velastin, S. A., & Xu, L.-Q. (2008) · Machine Vision and Applications · doi:10.1007/s00138-008-0132-4 · Cited by 541
Tracking unmodified smartphones using wi-fi monitors
Musa, A. B. M., & Eriksson, J. (2012) · Proceedings of the 10th ACM Conference on Embedded Network Sensor Systems · doi:10.1145/2426656.2426685 · Cited by 254 · cited 2×
“Some existing APs [14] and dedicated Wi-Fi monitors [15] easily eavesdrop and decode Wi-Fi frames to identify and track individual smartphones based on the uniqueMAC addresses embedded in each probe.”
BackgroundData-driven crowd analysis in videos
Rodriguez, M., Sivic, J., Laptev, I., & Audibert, J.-Y. (2011) · 2011 International Conference on Computer Vision · doi:10.1109/iccv.2011.6126374 · Cited by 203 · cited 3×
“Technologies such as computer vision [4], [6] can help in providing flow detection, people counting and density estimation, but they fail to provide accurate identification of individuals mobility patterns.”
BackgroundInfluentialCapturing crowd dynamics at large scale events using participatory GPS-localization
Blanke, U., Tröster, G., Franke, T., & Lukowicz, P. (2014) · International Conference on Intelligent Sensors, Sensor Networks and Information Processing · doi:10.1109/issnip.2014.6827652 · Cited by 107 · cited 3×
“Other applications collect location data from GPS sensors [12], [13], or other forms of localization techniques such as BLE, WiFi or 3G.”
BackgroundResultLow cost crowd counting using audio tones
Kannan, P. G., Venkatagiri, S. P., Chan, M. C., Ananda, A. L., & Peh, L.-S. (2012) · Proceedings of the 10th ACM Conference on Embedded Network Sensor Systems · doi:10.1145/2426656.2426673 · Cited by 97 · cited 2×
“In [17], the authors present a system that uses built-in microphones to sense smartphones by letting them exchange bit patterns encoded in audio tones.”
BackgroundCrowd Management with RFID and Wireless Technologies
Yamin, M., & Ades, Y. (2009) · doi:10.1109/netcom.2009.14 · Cited by 73 · cited 1×
“Active techniques such as RFID tags given to crowds can allow richer data about users mobility and behaviour but comes at an expensive cost for deploying RFID readers at points of data collection [5].”
BackgroundParticipatory Bluetooth Scans Serving as Urban Crowd Probes
Weppner, J., Lukowicz, P., Blanke, U., & Troster, G. (2014) · IEEE Sensors Journal · doi:10.1109/jsen.2014.2360123 · Cited by 28 · cited 2×
“Other similar systems [16] capture bluetooth response frames from bluetooth enabled smartphones when set to advertisement mode.”
BackgroundPilgrims Tracking Using Wireless Sensor Network
Mohandes, M. A., Haleem, M. A., Abul-Hussain, A., & Balakrishnan, K. (2011) · International Conference on Advanced Information Networking and Applications Workshops (WAINA) · doi:10.1109/waina.2011.123 · Cited by 25 · cited 1×
“The authors in [8] and [9] described two alternative systems for tracking and monitoring pilgrims during Hajj.”
Background
Research works printed but not linked: 5
- mohandes, 2010, RFID-based system for pilgrims identification and tracking, Appl Comput Electromagn Soc J, 25, 273
- 2014, White Paper-CMX Analytics
- 2014, Bluetooth Specification V4 0
- 2016, The Hajj Wikipedia
- 2015, Driven by Standards in 2016 Wi-Fi Direct and BLE Protocols Will Ship in 2 and 2 9 Billion Devices Respectively
Cited by
Performance Evaluation of Bluetooth Low Energy: A Systematic Review
Tosi, J., Taffoni, F., Santacatterina, M., Sannino, R., & Formica, D. (2017) · Sensors · doi:10.3390/s17122898 · Cited by 243
“In this way, it is possible to send some pieces of information about the surrounding area [25], or to detect the user position [26–32], or to measure the distance between sensor devices in the environment [33,34], or also to detect the presence of devices, and so people [22,24,35–38].”
BackgroundSensing, communication and security planes: A new challenge for a smart city system design
Habibzadeh, H., Soyata, T., Kantarci, B., Boukerche, A., & Kaptan, C. (2018) · Computer Networks · doi:10.1016/j.comnet.2018.08.001 · Cited by 129
Digital Revolution for Hajj Crowd Management: A Technology Survey
Felemban, E. A., Rehman, F. U., Biabani, S. A. A., Ahmad, A., Naseer, A., Majid, A. R. M. A., Hussain, O. K., Qamar, A. M., Falemban, R., & Zanjir, F. (2020) · IEEE Access · doi:10.1109/access.2020.3037396 · Cited by 107
“Anas [48] proposed relatively cheap off-the-shelf BLE proximity tagging architecture as an alternative method to RFID tagging which needs deployment of expensive RFID readers.”
MethodSmart City System Design: A Comprehensive Study of the Application and Data Planes
Habibzadeh, H., Kaptan, C., Soyata, T., Kantarcı, B., & Boukerche, A. (2019) · ACM Computing Surveys · doi:10.1145/3309545 · Cited by 98
“InReference [11], the authors introduce an application that tracks a crowd of users in a high-density location using inexpensive coin battery-powered BLE-based tags, which operate up to a year without requiring a battery replacement.”
BackgroundDarsena, D., Gelli, G., Iudice, I., & Verde, F. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2022.3223297 · Cited by 71
“BLE is proposed in [147], where a large population carry BLE proximity tags, acting as beacons, whose presence is sensed by smartphone carried by few volunteers.”
BackgroundDevice-Free Counting via Wideband Signals
Bartoletti, S., Conti, A., & Win, M. Z. (2017) · IEEE Journal on Selected Areas in Communications · doi:10.1109/jsac.2017.2680978 · Cited by 68
“identification (RFID) tags [7]–[9], or sniffed from personal devices, such as from Wi-Fi access points [10]–[15].”
BackgroundSolving Hajj and Umrah Challenges Using Information and Communication Technology: A Survey
Showail, A. J. (2022) · IEEE Access · doi:10.1109/access.2022.3190853 · Cited by 78
Tofigh, F., Amiri, M., Shariati, N., Lipman, J., & Abolhasan, M. (2019) · IEEE Transactions on Antennas and Propagation · doi:10.1109/tap.2019.2955275 · Cited by 46
“Wi-Fi/Bluetooth node scanning [4]–[8], bluetooth low energy (BLE) [9], and RFID tags [10] probing are some examples of these alternative methods.”
BackgroundIn-Depth Survey to Detect, Monitor and Manage Crowd
Al‐Shaery, A. M., Alshehri, S. S., Farooqi, N. S., & Khozium, M. O. (2020) · IEEE Access · doi:10.1109/access.2020.3038334 · Cited by 45
“The BLE tags are distributed on people to monitor and track the crowd using beaconing technology [30], [31].”
BackgroundOn the accuracy of BLE indoor localization systems: An assessment survey
Morgan, A. A. (2024) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2024.109455 · Cited by 37
Habibzadeh, H., & Soyata, T. (2019) · Springer eBooks · doi:10.1007/978-3-030-27844-1_5 · Cited by 27
IoT-Based Framework for Crowd Management
Mohamed, M. F., Shabayek, A. E. R., & El-Gayyar, M. (2018) · EAI/Springer Innovations in Communication and Computing · doi:10.1007/978-3-319-93491-4_3 · Cited by 23
Owaidah, A. A., Olaru, D., Bennamoun, M., Sohel, F. A., & Khan, R. N. (2021) · IEEE Access · doi:10.1109/access.2021.3083265 · Cited by 20
ICE-MoCha: Intelligent Crowd Engineering using Mobility Characterization and Analytics
Jabbari, A., Almalki, K. J., Choi, B., & Song, S. (2019) · Sensors · doi:10.3390/s19051025 · Cited by 16
“Basalamah et al. [24] used an active mode Bluetooth Low Energy (BLE) tag.”
BackgroundEnhanced Channel Access for Connection State of Bluetooth Low Energy Networks
Jeon, W. S., & Jeong, D. G. (2017) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2017.2675915 · Cited by 17
“The author in [12] designed an architecture for cost-effectively sensing individual mobility patterns of crowds, by letting a large population carry BLE-tags and”
BackgroundBLE Sniffing for Crowd Sensing and Directionality Scanning of Mobile Devices Inside Tunnels
Asiminidis, C., Kokkonis, G., & Kontogiannis, S. I. (2020) · World Symposium on Communication Engineering (WSCE) · doi:10.1109/wsce51339.2020.9275574 · Cited by 15
“Basalamah A. et al. [10] set low-cost BLE tags in advertisement mode in one of the largest annual gathering (The Hajj) in order to sense the crowd.”
BackgroundHuang, C., Kwok, H. L., Poon, K. H., Wu, Z., Hou, F., Ma, J., & Cheng, J. C. P. (2025) · Building and Environment · doi:10.1016/j.buildenv.2025.112963 · Cited by 14
Context-aware services based on spatio-temporal zoning and crowdsourcing
Ahmad, A., Rahman, M. A., Wahiddin, M. R., Rehman, F. U., Khelil, A., & Lbath, A. (2018) · Behaviour and Information Technology · doi:10.1080/0144929x.2018.1476586 · Cited by 14
“Basalamah (2016) introduced Bluetooth low-energy tags for crowd sensing and Mohandes (2008; Mohandes et al. 2011, 2012) 2010) added translation services to their ‘ SensoR-civico ’ platform, Sulaiman et al. (2009) presented Hajj-QAES, which gives replies to pilgrims for their queries.”
BackgroundPronello, C., Anbarasan, D., Spoturno, F., & Terzolo, G. (2025) · Public Transport · doi:10.1007/s12469-023-00349-0 · Cited by 13
“Traditionally, mat sensors have been used to count passengers by measuring their weight when boarding the bus (Basalamah 2016).”
A Survey of Wireless Sensing Security From a Role-Based View
Geng, R., Wang, J., Yuan, Y., Zhan, F., Zhang, T., Zhang, R., Huang, P., Zhang, D., Chen, J., Hu, Y., et al. (2025) · IEEE Communications Surveys & Tutorials · doi:10.1109/comst.2025.3597716 · Cited by 17
Radar-Based People Counting Under Heterogeneous Clutter Environments
Choi, J.-H., Kim, J.-E., & Kim, K. (2023) · IEEE Sensors Journal · doi:10.1109/jsen.2023.3332299 · Cited by 13
“…transmitted from the dedicated device source of each individual, such as Zigbee, Bluetooth, and radio frequency identification tags [13], [14], [15], [16], [17]; and 2) device-free counting, which conducts PC by analyzing the sensor reflections modulated from human movement itself [10], [18],…”
BackgroundVision and Crowdsensing Technology for an Optimal Response in Physical-Security
Enríquez, F., Morillo, L. M. S., Álvarez-García, J. A., Caparrini, F. S., Morente, F. V., Déniz, Ó., & Vállez, N. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-22750-0_2 · Cited by 13
“Indoors, localisation from WiFi footprint [11] or Bluetooth [4] is also used.”
MethodA Low-Cost Tracking System for Running Race Applications Based on Bluetooth Low Energy Technology
Perez-Diaz-de-Cerio, D., Hernández-Solana, Á., Valdovinos, A., & Valenzuela, J. (2018) · Sensors · doi:10.3390/s18030922 · Cited by 10
“There are also previous experiences in which Bluetooth Low Energy (BLE) has been used to provide crowd mobility detection by using a smartphone, with detectability rates of up to 90% [9].”
BackgroundMorgan, A. A., Humaid, G. S. B., & Moustafa, A. I. (2021) · Computers & Electrical Engineering · doi:10.1016/j.compeleceng.2021.107314 · Cited by 10
Muladi, M., Aripriharta, A., Zaeni, I. A. E., Sendari, S., Mahamad, A. K., Fahmi, F., & Yusrandi (2020) · International Seminar on Research of Information Technology and Intelligent Systems (ISRITI) · doi:10.1109/isriti51436.2020.9315377 · Cited by 10
“Android-based applications that run on smartphones using Bluetooth technology have been developed for data communication and object detection [15], [16].”
BackgroundCrowd Estimation Using Electromagnetic Wave Power-Level Measurements: A Proof of Concept
Tofigh, F., Amiri, M., Shariati, N., Lipman, J., & Abolhasan, M. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2019.2955223 · Cited by 9
“dynamics during Hajj [31].”
Analysis and Evaluation of Tracker Tag Efficiency
Hernández‐Orallo, E., Armero-Martínez, A., Calafate, C. T., & Manzoni, P. (2023) · Wireless Communications and Mobile Computing · doi:10.1155/2023/2880229 · Cited by 8
WITHDRAWN: Surveillance robot for health care applications using IoT and wireless sensor network
Sivakumar, T. A., Hussain, S., Kanmani, A., & Babu, M. A. (2021) · Materials Today Proceedings · doi:10.1016/j.matpr.2021.01.170 · Cited by 8
RetractedDevice-Free Counting via OFDM Signals of Opportunity
Bartoletti, S., Conti, A., & Win, M. Z. (2018) · IEEE International Conference on Communications workshops · doi:10.1109/iccw.2018.8403681 · Cited by 7
Towards counting via passive radar using OFDM waveforms
Bartoletti, S., Conti, A., & Win, M. Z. (2017) · IEEE International Conference on Communications workshops · doi:10.1109/iccw.2017.7962757 · Cited by 6
Capturing People Mobility with Mobile Sensing Technology for Disaster Evacuation
Song, C., Ito, M., & Sezaki, K. (2019) · Lecture notes in computer science · doi:10.1007/978-3-030-21935-2_15 · Cited by 6
Indoor Occupancy Estimation Using Visible Light Sensing (VLS) System
Mestiraihi, M. A., Abuella, H., & Ekin, S. (2018) · IEEE Vehicular Technology Conference · doi:10.1109/vtcfall.2018.8690704 · Cited by 6
“In [3], the authors proposed to use Bluetooth Low Energy (BLE) tags that can be distributed to the people, then a smart-phone will scan the Bluetooth tags and update the people count through an application.”
BackgroundUsing Mobile Sensing Technology for Capturing People Mobility Information
Song, C., Ito, M., Nishiyama, Y., & Sezaki, K. (2019) · doi:10.1145/3356995.3364541 · Cited by 6
“There is no need for additional devices like APs, just make sure that the proportion of people carrying Bluetooth devices in the crowd is enough [12].”
BackgroundReal-Time Healthcare Monitoring System using Smartphones
Elkhail, A. A., & Baroudi, U. A. (2018) · IEEE/ACS International Conference on Computer Systems and Applications (AICCSA) · doi:10.1109/aiccsa.2018.8612797 · Cited by 5
“Kim et al. introduced BLE mesh approach based on wireless mesh network protocol for BLE which utilizes the broadcasting ability of wireless communications [9].”
BackgroundInfluentialSmart Cities: An In-Depth Study of AI Algorithms and Advanced Connectivity
Raparthi, Y., Babu, M. R., Vineetha, B., Shakeer, S. M., & Potti, V. (2023) · International Journal on Recent and Innovation Trends in Computing and Communication · doi:10.17762/ijritcc.v11i8.7945 · Cited by 5
Enhancing People Counting in Cluttered Environments Using mm-Wave Radar, LSTM, and Ensemble Learning
Ali, M., & Maršálek, R. (2025) · IEEE International Workshop on Factory Communication Systems (WFCS) · doi:10.1109/wfcs63373.2025.11077632 · Cited by 3
Longo, G., Cantelli‐Forti, A., Russo, E., Lupia, F., Strohmeier, M., & Pugliese, A. (2024) · Pervasive and Mobile Computing · doi:10.1016/j.pmcj.2024.101997 · Cited by 3
Path loss model for crowd counting
Fadhlullah, S. Y., & Ismail, W. B. (2017) · IEEE International Conference on Control System, Computing and Engineering · doi:10.1109/iccsce.2017.8284377 · Cited by 2
“For example, [1] used audio tones, [2] and [3] used Bluetooth while [4] used both Wi-Fi and Bluetooth which are readily available in current mobile phones.”
MethodCROMO: Enhancing Crowd Mobility Characterization through Real-time Radio Frequency Data Analytics
Jabbari, A., Almalki, K. J., Choi, B., & Song, S. (2018) · IEEE International Smart Cities Conference (ISC2) · doi:10.1109/isc2.2018.8656977 · Cited by 1
“[16] the author used an active mode Bluetooth Low Energy (BLE) tag.”
MethodElectric Mobility Vehicle Reservation and Crowd Management for Al-masjid Al-haram
Altamimi, L., Alothman, S., Alyami, M., Alnaser, F., & Al-Yahya, M. M. (2024) · IEEE International Conference on Computing (ICOCO) · doi:10.1109/icoco62848.2024.10928260 · Cited by 1
“One notable study [1] uses Bluetooth low energy (BLE) tagging as an alternative method.”
Human Presence Detection Sensor Using Polarization Insensitive Metamaterial Absorbers
Tofigh, F., & Lipman, J. (2025) · IEEE Access · doi:10.1109/access.2025.3567637 · Cited by 1
“Appro-aches such as Wi-Fi and Bluetooth node scanning [4], [5], [6], [7], [8], [9], Bluetooth Low Energy (BLE) [10], and RFID-based detection systems [11] have been explored as viable solutions.”
Sistema de rastreamento de produtos utilizando a tecnologia Bluetooth
Baldo, A. S. B., & Ximenes, L. R. (2019) · Resumos do... · doi:10.20396/revpibic2720192062
An Approach to Indoor Occupant Counting Method Based on Zenithal Video Analysis
Wang, C., Wang, P., Song, B., Wang, Y., & Zhang, Z. (2020) · IEEE Joint International Information Technology and Artificial Intelligence Conference (ITAIC) · doi:10.1109/itaic49862.2020.9339012
Two Step Framework on Indoor Occupant Counting
Song, B., Wang, P., Wang, C., Wang, Y., & Zhang, Z. (2020) · IEEE Joint International Information Technology and Artificial Intelligence Conference (ITAIC) · doi:10.1109/itaic49862.2020.9339023
“The non-computer vision-based indoor occupant counting method uses sensors including Bluetooth [5], WIFI [6], RFID [7], infrared sensors [8] and Carbon dioxide sensors [9].”
MethodX-Fidence: Post-Pandemic Wellness By Density Monitoring with Privacy Preservation
Hasan, R., & Hasan, R. (2022) · IEEE Consumer Communications and Networking Conference · doi:10.1109/ccnc49033.2022.9700586
Investigation and Implementation of Beacon Technology for Man Tracking in Oil and Gas Industry
Firdaus, H. F. H., & Subramaniam, S. K. (2022) · International Journal of Education Science Technology and Engineering (IJESTE) · doi:10.36079/lamintang.ijeste-0501.373
Moreland, D. C., Howell, T. J., Takiff, J., Dillon, P. S., Fritz, T. E., & McIntyre, W. K. (2021) · DigitalCommons - CalPoly (California State Polytechnic University)
VICount: Device-free Crowd Counting System Using WiFi Signals
Zhang, Y., Huang, B., & Jia, B. (2025) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn64981.2025.11228705
“Contactless technologies, including computer vision [3], UWB [4], Blue-tooth [5], and infrared [6], have their own limitations, such as privacy concerns, sensitivity to lighting conditions, high hardware costs, and vulnerability to interference.”
Edge-Based Multimodal Crowd Monitoring System for Outdoor Environments
Hwang, T., Choi, W. G., Kim, S., Lee, J., Jeong, Y. H., & Kim, M. (2025) · International Conference on Information and Communication Technology Convergence (ICTC) · doi:10.1109/ictc66702.2025.11388264
Huang, C., Kwok, H. L., Hou, F., Wu, Z., Li, M., Ma, J., & Cheng, J. C. P. (2026) · Advanced Engineering Informatics · doi:10.1016/j.aei.2026.105372
Review of Bluetooth Low Energy RSS-Based Positioning
Aranda, F. J., Román-Jiménez, J., Álvarez, F. J., & Torres-Sospedra, J. (2026) · Sensors · doi:10.3390/s26216776
Metadata
- Authors
- Basalamah, A.
- Affiliations
- Umm al-Qura University (SA)
- Corresponding author
- Basalamah, Anas
- ORCID
- Basalamah, Anas
- Venue
- IEEE Access
- Published
- 2016
- Volume
- 4
- Pages
- 4225-4233
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2513282446
- Cited by
- 49
- References
- 14
- Citations by year
- 2026: 1 · 2025: 6 · 2024: 4 · 2023: 3 · 2022: 4 · 2021: 3 · 2020: 6 · 2019: 9 · 2018: 8 · 2017: 5
- FWCI
- 6.92
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion, cc-by)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- KACST through the National Science and Technology and Innovation Plan" (11-INF2061-10)
- Topics
- Physical Sciences › Computer Science › Computer Networks and Communications › Bluetooth and Wireless Communication Technologies
- Social Sciences › Transportation › Human Mobility and Location-Based Analysis
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Indoor and Outdoor Localization Technologies
- Keywords
- crowdsensing, passive sensing, individual mobility patterns, smartphone scanning, route reconstruction, crowd dynamics, RFID alternative, Hajj pilgrimage
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.