Transfer Learning With Neural Networks for Bearing Fault Diagnosis in Changing Working Conditions
Open accessThe DOI matches its Crossref record; 27 of the 27 references it cites were found in a registry or an index.
Abstract
Traditional machine learning algorithms have made great achievements in data-driven fault diagnosis. However, they assume that all the data must be in the same working condition and have the same distribution and feature space. They are not applicable for real-world working conditions, which often change with time, so the data are hard to obtain. In order to utilize data in different working conditions to improve the performance, this paper presents a transfer learning approach for fault diagnosis with neural networks. First, it learns characteristics from massive source data and adjusts the parameters of neural networks accordingly. Second, the structure of neural networks alters for the change of data distribution. In the same time, some parameters are transferred from source task to target task. Finally, the new model is trained by a small amount of target data in another working condition. The Case Western Reserve University bearing data set is used to validate the performance of the proposed transfer learning approach. Experimental results show that the proposed transfer learning approach can improve the classification accuracy and reduce the training time comparing with the conventional neural network method when there are only a small amount of target data.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Compared with the diagnosis model just trained with a small number of target-domain samples, the fine-tuned diagnosis model presented the faster convergence rate and higher diagnosis accuracy.”
From Applications of machine learning to machine fault diagnosis: A review and roadmap (2020) · cites this paper as [438]
Citations
Cites
Huang, N. E., Shen, Z., Long, S. R., Wu, M. C., Shih, H. H., Zheng, Q., Yen, N.-C., Tung, C. C., & Liu, H. H. (1998) · Proceedings of the Royal Society of London. Series A: Mathematical, Physical and Engineering Sciences · doi:10.1098/rspa.1998.0193 · Cited by 23,564 · cited 2×
“Lei et al. [28] proposed a mechanical fault diagnosis model based on WPD and EMD.”
MethodPan, S. J., & Yang, Q. (2010) · IEEE Transactions on Knowledge and Data Engineering · doi:10.1109/tkde.2009.191 · Cited by 23,387 · cited 1×
“It has made great progresses in image, audio and text recognition [16]–[18].”
BackgroundWeiss, K., Khoshgoftaar, T. M., & Wang, D. (2016) · Journal of Big Data · doi:10.1186/s40537-016-0043-6 · Cited by 6,260
Robust Model-Based Fault Diagnosis for Dynamic Systems
Chen, J., & Patton, R. J. (1999) · The International Series on Asian Studies in Computer and Information Science · doi:10.1007/978-1-4615-5149-2 · Cited by 4,262 · cited 1×
“These fault diagnosis methods can be divided into model driven methods [1], [2] and data driven methods.”
MethodLearning and Transferring Mid-level Image Representations Using Convolutional Neural Networks
Oquab, M., Bottou, L., Laptev, I., & Sivic, J. (2014) · 2014 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2014.222 · Cited by 3,150 · cited 1×
“[20] combined convolutional neural networks with transfer learning to learn and transfer mid-level image representations.”
BackgroundGao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135 · cited 1×
“These fault diagnosis methods can be divided into model driven methods [1], [2] and data driven methods.”
MethodBoosting for transfer learning
Dai, W., Yang, Q., Xue, G.-R., & Yu, Y. (2007) · Proceedings of the 24th international conference on Machine learning · doi:10.1145/1273496.1273521 · Cited by 1,724 · cited 1×
“[22] proposed a transfer learning framework called TrAdaBoost to select most useful and different samples as additional training data to improve the performance.”
BackgroundJia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710 · cited 1×
“[9] used deep neural networks to recognize faults by training the model with frequency spectra extracted from vibration signals.”
Self-taught learning: transfer learning from unlabeled data
Raina, R., Battle, A., Lee, H., Packer, B., & Ng, A. Y. (2007) · Proceedings of the 24th international conference on Machine learning · doi:10.1145/1273496.1273592 · Cited by 1,510 · cited 1×
“[21] designed selftaught learning to learn from unlabeled data and it improves classification accuracies of given image, audio and text classification tasks, respectively.”
BackgroundTransfer Learning for Reinforcement Learning Domains: A Survey
Taylor, M. E., & Stone, P. (2009) · doi:10.5555/1577069.1755839 · Cited by 1,488 · cited 1×
“The aim of transfer is to take advantage of experience learnt in one task and improve the performance in a similar but different task [24].”
Background
Research works printed but not linked: 1
- 0, Bearing Data Center Seeded Fault Test Data
Cited by
Applications of machine learning to machine fault diagnosis: A review and roadmap
Lei, Y., Yang, B., Jiang, X., Jia, F., Li, N., & Nandi, A. K. (2020) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106587 · Cited by 2,997
Guo, L., Lei, Y., Xing, S., Yan, T., & Li, N. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2877090 · Cited by 1,234
“As a matter of fact, it is demonstrated in [8]–[10] that the success of intelligent fault diagnosis of machines relies on those two conditions.”
BackgroundDeep Learning Algorithms for Bearing Fault Diagnostics—A Comprehensive Review
Zhang, S., Zhang, S., Wang, B., & Habetler, T. G. (2020) · IEEE Access · doi:10.1109/access.2020.2972859 · Cited by 913
Li, W., Huang, R., Li, J., Liao, Y., Chen, Z., He, G., Yan, R., & Gryllias, K. (2022) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2021.108487 · Cited by 816
Zhao, Z., Zhang, Q., Yu, X., Sun, C., Wang, S., Yan, R., & Chen, X. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3116309 · Cited by 526
“2) Applications to IFD: Pre-trained deep neural networks using the source data were used in [26]–[37] via frozing their partial parameters, and then part of network parameters were transferred to the target network and other parameters were fine-tuned with a small amount of target data.”
MethodDeep Transfer Learning for Bearing Fault Diagnosis: A Systematic Review Since 2016
Chen, X., Yang, R., Xue, Y., Huang, M., Ferrero, R., & Wang, Z. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3244237 · Cited by 516
“To resolve such a label inconsistency problem, the fine-tunebased methods were adopted by replacing the output layer of the pretrained model with a new one of the same dimension as target labels [108], [109].”
MethodA Digital-Twin-Assisted Fault Diagnosis Using Deep Transfer Learning
Xu, Y., Sun, Y., Liu, X., & Zheng, Y. (2019) · IEEE Access · doi:10.1109/access.2018.2890566 · Cited by 509
“[36] presented a transfer learning approach for bearing fault diagnosis with neural networks, they used shallow structure rather than deep neural network to tackle the same issues as DTL.”
BackgroundA systematic review of deep transfer learning for machinery fault diagnosis
Li, C., Zhang, S., Qin, Y., & Estupinan, E. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.04.045 · Cited by 472
Cao, P., Zhang, S., & Tang, J. (2018) · IEEE Access · doi:10.1109/access.2018.2837621 · Cited by 460
“Transfer learning, on the other hand, is capable of achieving prominent performance commensurate with large scale CNNs using only a small set of training date [31], [32].”
BackgroundLimited Data Rolling Bearing Fault Diagnosis With Few-Shot Learning
Zhang, A., Li, S., Cui, Y., Yang, W., Dong, R., & Hu, J. (2019) · IEEE Access · doi:10.1109/access.2019.2934233 · Cited by 419
“networks (RNNs) [25]–[27], transfer learning based neural networks [28]–[31].”
BackgroundLi, Y., Song, Y., Jia, L., Gao, S., Li, Q., & Qiu, M. (2021) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.3008010 · Cited by 399
“Zhang et al. [17] applied neural networks for fault diagnosis based on transfer learning.”
BackgroundOnline Fault Diagnosis Method Based on Transfer Convolutional Neural Networks
Xu, G., Liu, M., Jiang, Z., Shen, W., & Huang, C. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2902003 · Cited by 353
“Several previous studies [34]–[36] have drawn two conclusions: 1) initializing a deep neural network with transferred features learned from related data sets or tasks can boost the generalization performance and improve the efficiency of the network and 2) low-level features from shallow layers are general and similar…”
ResultIntelligent Fault Diagnosis for Rotary Machinery Using Transferable Convolutional Neural Network
Chen, Z., Gryllias, K., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2019.2917233 · Cited by 342
“Zhang et al. [31] constructed an artificial neural network and used the first-layer weights trained in one operating condition for the target task.”
MethodHakim, M., Omran, A. A. B., Ahmed, A. N., Al-Waily, M., & Abdellatif, A. (2023) · Ain Shams Engineering Journal · doi:10.1016/j.asej.2022.101945 · Cited by 305
Deep Learning-Based Intelligent Fault Diagnosis Methods Toward Rotating Machinery
Tang, S., Yuan, S., & Zhu, Y. (2020) · IEEE Access · doi:10.1109/access.2019.2963092 · Cited by 323
“With respect to new intelligent fault diagnosis, in place of feature extraction and selection, the features can be automatically learned from raw signals, which presents more intelligent than conventional approaches [57], [58].”
BackgroundUnderstanding Physics-Informed Neural Networks: Techniques, Applications, Trends, and Challenges
Farea, A., Yli-Harja, O., & Emmert-Streib, F. (2024) · AI · doi:10.3390/ai5030074 · Cited by 259
Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2807414 · Cited by 307
Subdomain Adaptation Transfer Learning Network for Fault Diagnosis of Roller Bearings
Wang, Z., He, X., Yang, B., & Li, N. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3108726 · Cited by 274
Dong, Y., Li, Y., Zheng, H., Wang, R., & Xu, M. (2022) · ISA Transactions · doi:10.1016/j.isatra.2021.03.042 · Cited by 264
Feng, Y., Chen, J., Xie, J., Zhang, T., Lv, H., & Pan, T. (2022) · Knowledge-Based Systems · doi:10.1016/j.knosys.2021.107646 · Cited by 262
Deng, Y., Huang, D., Du, S., Li, G., Zhao, C., & Lv, J. (2021) · Computers in Industry · doi:10.1016/j.compind.2021.103399 · Cited by 255
Transfer fault diagnosis of bearing installed in different machines using enhanced deep auto-encoder
Zhiyi, H., Haidong, S., Lin, J., Junsheng, C., & Yu, Y. (2020) · Measurement · doi:10.1016/j.measurement.2019.107393 · Cited by 254
Knowledge Transfer for Rotary Machine Fault Diagnosis
Yan, R., Shen, F., Sun, C., & Chen, X. (2020) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2949057 · Cited by 245
“In addition, some other algorithms were also carried out, such as neural networks [167].”
MethodChen, H., Luo, H., Huang, B., Jiang, B., & Kaynak, O. (2024) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2023.3290974 · Cited by 219
“As a result, reasonable adjustments of system modeling and feature extraction [50] are necessary for successful FD tasks, which has catalyzed lots of the transfer learning-motivated FD strategies over the past one decade [51], [52], [53], [54], [55], [56], [57], [58], [59], [60].”
BackgroundHe, Z., Shao, H., Wang, P., Lin, J. (., Cheng, J., & Yang, Y. (2020) · Knowledge-Based Systems · doi:10.1016/j.knosys.2019.105313 · Cited by 235
Fault diagnosis in rotating machines based on transfer learning: Literature review
Misbah, I., LEE, C. K. M., & KEUNG, K. L. (2024) · Knowledge-Based Systems · doi:10.1016/j.knosys.2023.111158 · Cited by 215
An, Y., Zhang, K., Chai, Y., Liu, Q., & Huang, X. (2023) · Expert Systems with Applications · doi:10.1016/j.eswa.2022.118802 · Cited by 206
AlShorman, O., Irfan, M., Saad, N., Zhen, D., Haider, N., Glowacz, A., & AlShorman, A. (2020) · Shock and Vibration · doi:10.1155/2020/8843759 · Cited by 215
“[159] Vibration Neural networks Transfer learning (i) Bearing FDD approach based on transfer learning with neural networks is proposed (ii) Different working conditions are analysed (iii) Training time comparing with NN is reduced (iii) It deals with massive data (iv) Transfer learning improved the classification accu…”
MethodCross-Domain Fault Diagnosis Using Knowledge Transfer Strategy: A Review
Zheng, H., Wang, R., Yang, Y., Yin, J., Li, Y., Li, Y., & Xu, M. (2019) · IEEE Access · doi:10.1109/access.2019.2939876 · Cited by 209
“Based on this idea, some research works proposed to inherit a part of parameters from the networks for source tasks when training the network for the target task [69], [70], [87], [90]–[93], [103]–[109].”
BackgroundMethodInfluentialHasan, M. J., Islam, M. M. M., & Kim, J.-M. (2019) · Measurement · doi:10.1016/j.measurement.2019.02.075 · Cited by 203
Mansouri, M., Trabelsi, M., Nounou, H., & Nounou, M. (2021) · IEEE Access · doi:10.1109/access.2021.3110947 · Cited by 176
“Its main goal is to apply knowledge and skills learned from a data-rich source domain followed by the application to a related target domain with only a small amount of data [133], [136], [137].”
BackgroundMethodBig data analytics for smart factories of the future
Gao, R. X., Wang, L., Helu, M., & Teti, R. (2020) · CIRP Annals · doi:10.1016/j.cirp.2020.05.002 · Cited by 170
Han, T., Liu, C., Yang, W., & Jiang, D. (2019) · ISA Transactions · doi:10.1016/j.isatra.2019.03.017 · Cited by 174
Remaining useful life prediction of aero-engine enabled by fusing knowledge and deep learning models
Li, Y., Chen, Y., Hu, Z., & Zhang, H. (2022) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2022.108869 · Cited by 182
He, Z., Shao, H., Ding, Z., Jiang, H., & Cheng, J. (2022) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2021.3050382 · Cited by 165
“[33] combined autoencoder and parameter transfer for bearing fault detection under changeable rotating speeds.”
BackgroundDomain Adaptive Motor Fault Diagnosis Using Deep Transfer Learning
Xiao, D., Huang, Y., Zhao, L., Qin, C., Shi, H., & Liu, C. (2019) · IEEE Access · doi:10.1109/access.2019.2921480 · Cited by 160
“Zhang et al. used a model-based transfer learning method for a small sample problem based on multiple fully-connected neural networks [19].”
MethodHUST bearing: a practical dataset for ball bearing fault diagnosis
Thuận, N. Đ., & Hong, H. S. (2023) · BMC Research Notes · doi:10.1186/s13104-023-06400-4 · Cited by 165
Zheng, H., Wang, R., Yang, Y., Li, Y., & Xu, M. (2020) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2019.2898619 · Cited by 158
“[18] presented a transfer learning approach for improving bearing fault diagnosis performance, which can transfer partial parameters from”
BackgroundDeep Adversarial Subdomain Adaptation Network for Intelligent Fault Diagnosis
Liu, Y., Wang, Y., Chow, T. W. S., & Li, B. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3141783 · Cited by 164
Schwendemann, S., Amjad, Z., & Sikora, A. (2021) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2021.104415 · Cited by 158
Michau, G., & Fink, O. (2020) · Knowledge-Based Systems · doi:10.1016/j.knosys.2021.106816 · Cited by 140
“For example, one can first find good features for solving the machine learning task on the source dataset and then find the right transformation of the target dataset [13, 42, 47].”
BackgroundA lightweight neural network with strong robustness for bearing fault diagnosis
Yao, D., Liu, H., Yang, J., & Li, X. (2020) · Measurement · doi:10.1016/j.measurement.2020.107756 · Cited by 146
Deng, Y., Lv, J., Huang, D., & Du, S. (2023) · Neurocomputing · doi:10.1016/j.neucom.2023.126391 · Cited by 141
Chen, Z., Cen, J., & Xiong, J. (2020) · IEEE Access · doi:10.1109/access.2020.3016888 · Cited by 139
“Zhang et al. [30] studied the neural network model based on transfer learning for small data under different working conditions, which was well applied to bearing fault diagnosis.”
MethodA Systematic Literature Review on Transfer Learning for Predictive Maintenance in Industry 4.0
Azari, M. S., Flammini, F., Santini, S., & Caporuscio, M. (2023) · IEEE Access · doi:10.1109/access.2023.3239784 · Cited by 155
A Robust Weight-Shared Capsule Network for Intelligent Machinery Fault Diagnosis
Huang, R., Li, J., Wang, S., Li, G., & Li, W. (2020) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2020.2964117 · Cited by 131
“…survey of intelligent methods applied for RM, prior intelligent fault diagnosis studies perform quite wellunderstationaryworkingconditions,andgenerallyrequired thattheofflinetrainingscenariosarethesameastheonline testingscenarios,whichmeansthatRMshouldoperateunder identicalworkingcondition[29].”
MethodA survey of transfer learning for machinery diagnostics and prognostics
Yao, S., Kang, Q., Zhou, M., Rawa, M. J. H., & Abusorrah, A. M. (2022) · Artificial Intelligence Review · doi:10.1007/s10462-022-10230-4 · Cited by 136
Online detection for bearing incipient fault based on deep transfer learning
Mao, W., Ding, L., Tian, S. I. P., & Liang, X. (2019) · Measurement · doi:10.1016/j.measurement.2019.107278 · Cited by 126
Machine learning for fault analysis in rotating machinery: A comprehensive review
Daş, O., DAŞ, D. B., & Birant, D. (2023) · Heliyon · doi:10.1016/j.heliyon.2023.e17584 · Cited by 142
“9, the majority of those studies are focused on the rolling faults [103 – 106], inner race [107 – 118], and outer race defects [119 – 127].”
BackgroundFault diagnostics between different type of components: A transfer learning approach
Li, X., Hu, Y., Li, M., & Zheng, J. (2019) · Applied Soft Computing · doi:10.1016/j.asoc.2019.105950 · Cited by 115
Rauber, T. W., Loca, A. L. D. S., Boldt, F. D. A., Rodrigues, A. L., & Varejão, F. M. (2020) · Expert Systems with Applications · doi:10.1016/j.eswa.2020.114022 · Cited by 123
A deep boosted transfer learning method for wind turbine gearbox fault detection
Jamil, F., Verstraeten, T., Nowé, A., Peeters, C., & Helsen, J. (2022) · Renewable Energy · doi:10.1016/j.renene.2022.07.117 · Cited by 117
He, Z., Shao, H., Zhang, X., Cheng, J., & Yang, Y. (2019) · IEEE Access · doi:10.1109/access.2019.2936243 · Cited by 113
“Zhang et al. [29] combined transfer learning and neural network for bearing fault identification under changeable working conditions.”
BackgroundState-of-the-Art Technologies in Fault Diagnosis of Electric Vehicles: A Component-Based Review
Choudhary, A., Fatima, S., & Panigrahi, B. K. (2022) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2022.3209166 · Cited by 112
“It is applied to a variety of tasks, including text categorization and spam filtering [274].”
MethodHasan, M. J., & Kim, J.-M. (2018) · Applied Sciences · doi:10.3390/app8122357 · Cited by 105
“To validate the performance of the proposed method, some recent deep learning approaches, including raw signal-based TL approach [33], hierarchical CNN-based approach [29], and ensemble deep autoencoders approach [27], are compared with the proposed method.”
BackgroundMethodInfluentialFault Diagnosis of Intelligent Production Line Based on Digital Twin and Improved Random Forest
Guo, K. Z., Wan, X., Liu, L., Gao, Z., & Yang, M. (2021) · Applied Sciences · doi:10.3390/app11167733 · Cited by 110
“In this case, transfer learning can save a lot of labeled data in the target domain [37].”
BackgroundCentral moment discrepancy based domain adaptation for intelligent bearing fault diagnosis
Li, X., Hu, Y., Zheng, J., Li, M., & Ma, W. (2020) · Neurocomputing · doi:10.1016/j.neucom.2020.11.063 · Cited by 107
A roadmap to fault diagnosis of industrial machines via machine learning: A brief review
Vashishtha, G., Chauhan, S., Sehri, M., Zimroz, R., Dumond, P., Kumar, R., & Gupta, M. K. (2024) · Measurement · doi:10.1016/j.measurement.2024.116216 · Cited by 111
Fault Diagnosis Methods Based on Machine Learning and its Applications for Wind Turbines: A Review
Sun, T., Yu, G., Gao, M., Zhao, L., Bai, C., & Yang, W. (2021) · IEEE Access · doi:10.1109/access.2021.3124025 · Cited by 100
Milling force prediction model based on transfer learning and neural network
Wang, J., Zou, B., Liu, M., Li, Y., Ding, H., & Xue, K. (2020) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-020-01595-w · Cited by 100
“On one hand, the research of Zhang et al. (2017) has shown that transfer learning is capable of achieving prominent performance, commensurate with large scale CNNs, using only a small set of training data.”
BackgroundTransfer learning for remaining useful life prediction based on consensus self-organizing models
Fan, Y., Nowaczyk, S., & Rognvaldsson, T. S. (2020) · Reliability Engineering & System Safety · doi:10.1016/j.ress.2020.107098 · Cited by 107
Predicting concentration levels of air pollutants by transfer learning and recurrent neural network
Fong, I. H., Li, T., Fong, S. J., Wong, R. K., & Tallón‐Ballesteros, A. J. (2020) · Knowledge-Based Systems · doi:10.1016/j.knosys.2020.105622 · Cited by 96
Remaining Useful Life Estimation Under Multiple Operating Conditions via Deep Subdomain Adaptation
Ding, Y., Jia, M., & Cao, Y. (2021) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2021.3076567 · Cited by 102
“Zhang et al. [34] first realized the application of TL in fault diagnosis.”
BackgroundDeep Transfer Learning in Mechanical Intelligent Fault Diagnosis: Application and Challenge
Qian, C., Zhu, J., Shen, Y., Jiang, Q., & Zhang, Q. (2022) · Neural Processing Letters · doi:10.1007/s11063-021-10719-z · Cited by 92
Wu, J., Tang, T., Chen, M., Wang, Y., & Wang, K. (2020) · Expert Systems with Applications · doi:10.1016/j.eswa.2020.113710 · Cited by 94
Rolling bearing fault diagnosis based on feature fusion with parallel convolutional neural network
Liang, M., Cao, P., & Tang, J. (2020) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-020-06401-8 · Cited by 93
Rolling Bearing Fault Diagnosis Using Hybrid Neural Network with Principal Component Analysis
Keshun, Y., Qiu, G., & Gu, Y. (2022) · Sensors · doi:10.3390/s22228906 · Cited by 90
Hou, W., Zhang, C., Jiang, Y., Cai, K., Wang, Y., & Ni, L. Y. (2023) · Measurement · doi:10.1016/j.measurement.2023.112879 · Cited by 90
Mechanical fault diagnosis based on deep transfer learning: a review
Yang, D., Zhang, W.-B., & Jiang, Y.-Z. (2023) · Measurement Science and Technology · doi:10.1088/1361-6501/ace7e6 · Cited by 86
“Zhang et al [19] used the source domain after model training and froze all layers except the softmax layer, and through a small number of labeled target domain data fine-tuning softmax layer parameters, to achieve a small sample fault diagnosis problem.”
Valtierra‐Rodriguez, M., Rivera‐Guillen, J. R., Basurto-Hurtado, J. A., De-Santiago-Perez, J. J., Granados‐Lieberman, D., & Amézquita-Sánchez, J. P. (2020) · Sensors · doi:10.3390/s20133721 · Cited by 84
Abbassi, R., Arzaghi, E., Yazdi, M., Aryai, V., Garaniya, V., & Rahnamayiezekavat, P. (2022) · Process Safety and Environmental Protection · doi:10.1016/j.psep.2022.07.046 · Cited by 97
Su, H., Yang, X., Xiang, L., Hu, A., & Xu, Y. (2022) · Knowledge-Based Systems · doi:10.1016/j.knosys.2022.108381 · Cited by 83
Misra, S., Kumar, S., Sayyad, S., Bongale, A. M., Jadhav, P., Kotecha, K. V., Abraham, A., & Gabralla, L. A. (2022) · Sensors · doi:10.3390/s22218210 · Cited by 88
“[14] presented a model for bearing failure diagnosis in an induction motor in different working conditions with the assistance of transfer learning by incorporating the use of neural networks, vibration data, and the sliding frame technique to generate training samples from the vibrational data obtained.”
MethodBearing Fault Classification Based on Convolutional Neural Network in Noise Environment
Jiang, Q., Chang, F., & Sheng, B. (2019) · IEEE Access · doi:10.1109/access.2019.2919126 · Cited by 80
Liu, W., Zhu, C. G., & Zheng, M. (2020) · Proceedings of the ... American Control Conference/Proceedings of the American Control Conference · doi:10.23919/acc45564.2020.9148044 · Cited by 91
“[27] utilized transfer learning to improve bearing fault diagnosis performance in different working environments.”
BackgroundA multi-source ensemble domain adaptation method for rotary machine fault diagnosis
Yang, S., Kong, X., Wang, Q., Li, Z., Cheng, H., & Yu, L. (2021) · Measurement · doi:10.1016/j.measurement.2021.110213 · Cited by 81
Bhuiyan, M. R., & Uddin, J. (2023) · Vibration · doi:10.3390/vibration6010014 · Cited by 83
“[106] offers the “ToyADMOS2” large-scale dataset for anomaly identification in machine operation noises (ADMOS).”
BackgroundUnsupervised domain adaptation via enhanced transfer joint matching for bearing fault diagnosis
Zhang, Z., Chen, H., Li, S., & An, Z. (2020) · Measurement · doi:10.1016/j.measurement.2020.108071 · Cited by 73
Lv, H., Chen, J., Pan, T., & Zhou, Z. (2020) · Applied Soft Computing · doi:10.1016/j.asoc.2020.106577 · Cited by 76
Zhang, K., Chen, J., Zhang, T., He, S., Pan, T., & Zhou, Z. (2020) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2020.10.007 · Cited by 74
Knowledge Integration into deep learning in dynamical systems: an overview and taxonomy
Kim, S. W., Kim, I., Lee, J., & Lee, S. (2021) · Journal of Mechanical Science and Technology · doi:10.1007/s12206-021-0342-5 · Cited by 82
Multiple Classifiers and Data Fusion for Robust Diagnosis of Gearbox Mixed Faults
Senanayaka, J. S. L., Khang, H. V., & Robbersmyr, K. G. (2018) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2018.2883357 · Cited by 74
Wu, Z., Yu, S., Zhu, X., Ji, Y., & PECHT, M. G. (2019) · IEEE Access · doi:10.1109/access.2019.2943076 · Cited by 72
“[14] proposed a fault diagnosis model to make full use of data in different working conditions based on transfer learning with neural networks.”
BackgroundMethodVoice disorder classification using convolutional neural network based on deep transfer learning
Peng, X., Xu, H., Liu, J., Wang, J., & He, C. (2023) · Scientific Reports · doi:10.1038/s41598-023-34461-9 · Cited by 56
Multi-Fault Bearing Classification Using Sensors and ConvNet-Based Transfer Learning Approach
Udmale, S. S., Singh, S. K., Singh, R., & Sangaiah, A. K. (2019) · IEEE Sensors Journal · doi:10.1109/jsen.2019.2947026 · Cited by 69
“This work has been motivated by [20], [22] to develop a CNN-based TL approach to address the problem of insuffi-”
MethodHan, T., Nunes, V. X., Souza, L. F. D. F., Marques, A. G., Silva, I. C. L., Ferreira, M. A. A., Sun, J., & Filho, P. P. R. (2020) · IEEE Access · doi:10.1109/access.2020.2987932 · Cited by 78
“The Transfer Learning process [60] has been increasingly used which makes the model more robust and efficient, while the demand for data decreases for training.”
MethodGas path fault diagnosis for gas turbine group based on deep transfer learning
Yang, X., Bai, M., Liu, J., Liu, J., & Yu, D. (2021) · Measurement · doi:10.1016/j.measurement.2021.109631 · Cited by 72
Yin, H., Li, Z., Zuo, J., Liu, H., Yang, K., & Li, F. (2020) · Mathematical Problems in Engineering · doi:10.1155/2020/2604191 · Cited by 70
“In addition to the aforementioned common ML methods, many other classification algorithms have also been applied to the identification of bearing faults, Bayesian networks [14], ELM [15], transfer learning [16], random forest [17], independent component analysis [18], Hindawi Mathematical Problems in Engineering Volum…”
MethodLiu, H., Yao, D., Yang, J., & Li, X. (2019) · Sensors · doi:10.3390/s19224827 · Cited by 69
“Although CNN performed well in the experiment, it has always faced problems in fault diagnosis: The model has poor generalization in different environments [20,21].”
MethodTransfer Learning With Time Series Data: A Systematic Mapping Study
Weber, M., Auch, M., Doblander, C., Mandl, P., & Jacobsen, H. (2021) · IEEE Access · doi:10.1109/access.2021.3134628 · Cited by 86
Zheng, H., Wang, R., Yin, J., Li, Y., Lu, H., & Xu, M. (2019) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2019.106344 · Cited by 68
Ahmed, H., & Nandi, A. K. (2018) · IEEE Access · doi:10.1109/access.2018.2865116 · Cited by 65
“[23] proposed a transfer learning method based on neural networks for fault diagnosis of roller bearings.”
MethodKim, H., & Youn, B. D. (2019) · IEEE Access · doi:10.1109/access.2019.2906273 · Cited by 68
“[29] used parameter transfer to diagnose under changing working conditions, and Shi-Sheng and Song [30] used a large number of normal data as source data to diagnose a small number of gas turbine fault samples.”
BackgroundMethodTong, Z., Li, W., Zhang, B., & Zhang, M. (2018) · Shock and Vibration · doi:10.1155/2018/6714520 · Cited by 64
“As a direct result, the classifier can achieve high accuracy on training domain while performing poorly on test domain [14].”
BackgroundMethodInfluentialTransfer learning with limited labeled data for fault diagnosis in nuclear power plants
Li, J., Lin, M., Li, Y., & Wang, X. (2022) · Nuclear Engineering and Design · doi:10.1016/j.nucengdes.2022.111690 · Cited by 64
Transfer Learning Method Based on Adversarial Domain Adaption for Bearing Fault Diagnosis
Shao, J., Huang, Z., & Zhu, J. (2020) · IEEE Access · doi:10.1109/access.2020.3005243 · Cited by 63
“At present, applying transfer learning methods into fault diagnosis has become a research hotspot [10], [11].”
BackgroundA deep reinforcement transfer convolutional neural network for rolling bearing fault diagnosis
Wu, Z., Jiang, H., Liu, S., & Wang, R. (2022) · ISA Transactions · doi:10.1016/j.isatra.2022.02.032 · Cited by 61
Multi-Condition Fault Diagnosis of Dynamic Systems: A Survey, Insights, and Prospects
Han, P., Liu, Z., He, X. Y., Ding, S. X., & Zhou, D. (2025) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2025.3571516 · Cited by 72
Data-Knowledge-Based Fuzzy Neural Network for Nonlinear System Identification
Wu, X., Han, H., Liu, Z., & Qiao, J. (2019) · IEEE Transactions on Fuzzy Systems · doi:10.1109/tfuzz.2019.2931870 · Cited by 59
“introduced a transfer learning method to design a Bayesian model [23].”
MethodDiesel engine fault diagnosis for multiple industrial scenarios based on transfer learning
Zhang, J., Pei, G., Zhu, X., Xin, G., Deng, L., Gao, L., Liu, Z., Ni, Q., & Lin, J. (2024) · Measurement · doi:10.1016/j.measurement.2024.114338 · Cited by 62
Metadata
- Authors
- Zhang, R., Tao, H., Wu, L., & Guan, Y.
- Affiliations
- Capital Normal University (CN)
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 14347-14357
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2731372149
- Cited by
- 378
- References
- 27
- Citations by year
- 2026: 23 · 2025: 29 · 2024: 37 · 2023: 48 · 2022: 62 · 2021: 62 · 2020: 58 · 2019: 44 · 2018: 14 · 2017: 1
- FWCI
- 20.10
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Funders
- National Natural Science Foundation of China (61202027)
- Beijing Natural Science Foundation of China (4122015)
- Project of Construction of Innovative Teams and Teacher Career Development for Universities and Colleges under Beijing Municipality (IDHT20150507)
- Topics
- Physical Sciences › Engineering › Control and Systems Engineering › Machine Fault Diagnosis Techniques
- Physical Sciences › Engineering › Control and Systems Engineering › Fault Detection and Control Systems
- Physical Sciences › Computer Science › Artificial Intelligence › Domain Adaptation and Few-Shot Learning
- Keywords
- transfer learning, bearing fault diagnosis, artificial neural networks, changing working conditions, domain adaptation, distribution shift, vibration signal classification
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.