The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification
Abstract
In modern digital manufacturing, nearly 79.6% of the downtime of a machine tool is caused by its mechanical failures. Predictive maintenance (PdM) is a useful way to minimize the machine downtime and the associated costs. One of the challenges with PdM is early fault detection under time-varying operational conditions, which means mining sensitive fault features from condition signals in long-term running. However, fault features are often weakened and disturbed by the time-varying harmonics and noise during a machining process. Existing analysis methods of these complex and diverse data are inefficient and time-consuming. This paper proposes a novel method for early fault detection under time-varying conditions. In this study, a deep learning model is constructed to automatically select the impulse responses from the vibration signals in long-term running of 288 days. Then, dynamic properties are identified from the selected impulse responses to detect the early mechanical fault under time-varying conditions. Compared to traditional methods, the experimental results in this paper have proved that our method was not affected by time-varying conditions and showed considerable potential for early fault detection in manufacturing.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Gao, Z., Cecati, C., & Ding, S. X. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2417501 · Cited by 3,135
Jia, F., Lei, Y., Lin, J., Zhou, X., & Lu, N. (2016) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2015.10.025 · Cited by 1,710
Real-Time Motor Fault Detection by 1-D Convolutional Neural Networks
Ince, T., Kiranyaz, S., Eren, L., Askar, M., & Gabbouj, M. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2582729 · Cited by 1,407
Advanced monitoring of machining operations
Teti, R., Jemielniak, K., O’Donnell, G., & Dornfeld, D. (2010) · CIRP Annals · doi:10.1016/j.cirp.2010.05.010 · Cited by 1,354
Lei, Y., Jia, F., Lin, J., Xing, S., & Ding, S. X. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2519325 · Cited by 1,191
A New Deep Transfer Learning Based on Sparse Auto-Encoder for Fault Diagnosis
Wen, L., Gao, L., & Li, X. (2019) · IEEE Transactions on Systems, Man, and Cybernetics: Systems · doi:10.1109/tsmc.2017.2754287 · Cited by 1,095
Chatter in machining processes: A review
Quintana, G., & Ciurana, J. (2011) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2011.01.001 · Cited by 1,038
Feng, Z., Liang, M., & Chu, F. (2013) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2013.01.017 · Cited by 998
FEATURE EXTRACTION BASED ON MORLET WAVELET AND ITS APPLICATION FOR MECHANICAL FAULT DIAGNOSIS
LIN, J., & QU, L. (2000) · Journal of Sound and Vibration · doi:10.1006/jsvi.2000.2864 · Cited by 879
A Survey of Binary Similarity and Distance Measures
Choi, S.-S., Cha, S.-H., & Tappert, C. C. (2010) · Cited by 843
Cited by
A systematic literature review of machine learning methods applied to predictive maintenance
Carvalho, T. P., Soares, F. A. A. M. N., Vita, R., Francisco, R. D. P., Basto, J. P., & Alcalá, S. G. S. (2019) · Computers & Industrial Engineering · doi:10.1016/j.cie.2019.106024 · Cited by 1,576
Ahmed, I., Jeon, G., & Piccialli, F. (2022) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2022.3146552 · Cited by 853
Machine Learning in Predictive Maintenance towards Sustainable Smart Manufacturing in Industry 4.0
Çınar, Z. M., Abdussalam Nuhu, A., Zeeshan, Q., Korhan, O., Asmael, M., & Safaei, B. (2020) · Sustainability · doi:10.3390/su12198211 · Cited by 834
Deep Learning for Anomaly Detection in Time-Series Data: Review, Analysis, and Guidelines
Choi, K., Yi, J., Park, C., & Yoon, S. (2021) · IEEE Access · doi:10.1109/access.2021.3107975 · Cited by 588
Tackling Faults in the Industry 4.0 Era—A Survey of Machine-Learning Solutions and Key Aspects
Angelopoulos, A., Michailidis, E. T., Nomikos, N., Trakadas, P., Hatziefremidis, A., Voliotis, S., & Zahariadis, T. (2019) · Sensors · doi:10.3390/s20010109 · Cited by 365
Metadata
- Authors
- Luo, B., Wang, H., Liu, H., Li, B., & Peng, F.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2019-01
- Volume
- 66
- Issue
- 1
- Pages
- 509-518
- ISSN
- 0278-0046 (ISSN-L)
- 1557-9948
- OpenAlex
- W2789904726
- Cited by
- 307
- References
- 33
- FWCI
- 18.31
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification. https://app.cochat.ai/papers/10.1109/tie.2018.2807414
- The paper
- Luo, B., Wang, H., Liu, H., Li, B., & Peng, F. (2019). Early Fault Detection of Machine Tools Based on Deep Learning and Dynamic Identification. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2018.2807414
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.