Finite Element Thermal Model and Simulation for a Cylindrical Li-Ion Battery
Open accessThe DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Due to the advantages of high energy density, no memory effect, and long cycle life, Li-ion batteries are being widely studied and proverbially used as power sources for electric vehicles. The performance of Li-ion battery systems is largely dependent on the thermal conditions and the temperature gradient uniformity inside. In order to tackle with the inconsistency problems of temperature distribution among battery cells in a battery pack, a thermal model for a cylindrical battery based on the finite-element method was developed. Physical structure and electrochemical reactions were both considered, and the initial conditions, boundary conditions, and thermal characteristic parameters of the battery components were determined through theoretical calculation and experiments. The discharge thermal characteristics were further investigated. In addition, the experiments were conducted to verify the accuracy of the presented model. Comparing the theoretical analysis with experimental results, it shows that the relative errors between the simulation and the tests are small at varied ambient temperatures and discharge rates. Therefore, the model can be efficiently applied to predicting the thermal behaviors of Li-ion batteries in practical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Modeling of Galvanostatic Charge and Discharge of the Lithium/Polymer/Insertion Cell
Doyle, M., Fuller, T. F., & Newman, J. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2221597 · Cited by 4,328 · cited 1×
“proposed an isothermal model for the lithium/polymer/insertion cell under the isotropic condition [14].”
BackgroundA General Energy Balance for Battery Systems
Bernardi, D., Pawlikowski, E., & Newman, J. (1985) · Journal of The Electrochemical Society · doi:10.1149/1.2113792 · Cited by 2,548 · cited 1×
“presented a pioneering work by introducing a general energy balance for battery thermal modeling, in which a uniform temperature throughout the cell is assumed [13].”
Background
Cited by
Choudhari, V. G., Dhoble, D. A. S., & Sathe, T. M. (2020) · Journal of Energy Storage · doi:10.1016/j.est.2020.101729 · Cited by 298
Progress in battery thermal management systems technologies for electric vehicles
Gharehghani, A., Rabiei, M., Mehranfar, S., Saeedipour, S., Mahmoudzadeh Andwari, A., García, A., & Reche, C. M. (2024) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2024.114654 · Cited by 263
Wang, Z., Ma, J., & Zhang, L. (2017) · IEEE Access · doi:10.1109/access.2017.2759094 · Cited by 205
“So far, lithium-ion batteries represent a leading candidate in this regard, thanks to their intrinsic advantages including high energy density and long lifespan along with nomemory effect compared with other battery chemistries [4]–[6].”
BackgroundSelf-citationElectrothermal Modeling of Lithium-Ion Batteries for Electric Vehicles
Yang, Z., Patil, D., & Fahimi, B. (2019) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2018.2880138 · Cited by 67
Geometry-influenced cooling performance of lithium-ion battery
Dubey, D., Mishra, A., Ghosh, S., Reddy, M. V., & Pandey, R. (2023) · Applied Thermal Engineering · doi:10.1016/j.applthermaleng.2023.120723 · Cited by 25
“Considering the same assumptions as per the battery thermal model discussed earlier [42,43],the 3D heat balance equation for DG, LG and SG cylindrical batteries can be expressed as below in equation (5): where, refers to the total heat generation, which is the summation of heat generated by…”
Method
Metadata
- Authors
- Wang, Z., Ma, J., & Zhang, L.
- Venue
- IEEE Access
- Published
- 2017
- Volume
- 5
- Pages
- 15372-15379
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2731791921
- Cited by
- 126
- References
- 2
- FWCI
- 7.76
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Finite Element Thermal Model and Simulation for a Cylindrical Li-Ion Battery. https://app.cochat.ai/papers/10.1109/access.2017.2723436
- The paper
- Wang, Z., Ma, J., & Zhang, L. (2017). Finite Element Thermal Model and Simulation for a Cylindrical Li-Ion Battery. IEEE Access. https://doi.org/10.1109/access.2017.2723436
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.