The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications
Open accessAbstract
This paper presents a technical overview for low-noise switched reluctance motor (SRM) drives in electric vehicle (EV) applications. With ever-increasing concerns over environmental and cost issues associated with permanent magnet machines, there is a technical trend to utilize SRMs in some mass production markets. The SRM is gaining much interest for EVs due to its rare-earth-free characteristic and excellent performance. In spite of many advantages compared with conventional adjustable-speed drives, SRMs suffer from torque ripple and radial distortion (and thus noise and vibration) by their nature. Therefore, for high-performance vehicle applications, it is important and urgent to optimize the SRM system to overcome the drawbacks of the noise and vibration. In order to present clear solutions to the acoustic noise in SRMs, this paper starts by analyzing the mechanism of the radial vibration and torque ripples inherent in the motors, and then focuses on the state-of-the-art technologies to mitigate the radial force and torque ripples. It highlights two categories for low-noise SRMs, including the machine topology improvement and control strategy design for radial vibration mitigation and torque ripple reduction. Advanced technologies are reviewed, classified, and compared accordingly. In addition to these methodologies, the schemes that have been developed by authors are also presented and discussed. Finally, the research status on this topic is summarized and forecast research hotspots are presented. It is our intention that this paper provides the guidance on performance improvements for low-noise SRM drives in EV applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Switched Reluctance Motors and Their Control
Miller, T. J. E. (1993) · Medical Entomology and Zoology · Cited by 1,300
Automotive Electric Propulsion Systems With Reduced or No Permanent Magnets: An Overview
Boldea, I., Tutelea, L. N., Parsa, L., & Dorrell, D. (2014) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2014.2301754 · Cited by 813
Bostanci, E., Moallem, M., Parsapour, A., & Fahimi, B. (2017) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2017.2649883 · Cited by 430
An Extended-Speed Low-Ripple Torque Control of Switched Reluctance Motor Drives
Ye, J., Bilgin, B., & Emadi, A. (2015) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2014.2316272 · Cited by 277
Desai, P. C., Krishnamurthy, M., Schofield, N., & Emadi, A. (2010) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2009.2034678 · Cited by 263
Development of a Rare-Earth-Free SR Motor With High Torque Density for Hybrid Vehicles
Chiba, A., Kiyota, K., Hoshi, N., Takemoto, M., & Ogasawara, S. (2015) · IEEE Transactions on Energy Conversion · doi:10.1109/tec.2014.2343962 · Cited by 246
Implementation of the Three-Phase Switched Reluctance Machine System for Motors and Generators
Chen, H., & Gu, J. J. (2010) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2009.2027901 · Cited by 186
Advanced Power-Source Integration in Hybrid Electric Vehicles: Multicriteria Optimization Approach
Hu, X., Jiang, J., Egardt, B., & Cao, D. (2015) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2015.2463770 · Cited by 174
Gan, C., Wu, J., Shen, M., Yang, S., Hu, Y., & Cao, W. (2015) · IEEE Transactions on Magnetics · doi:10.1109/tmag.2015.2441035 · Cited by 165
Self-citationGan, C., Wu, J., Hu, Y., Yang, S., Cao, W., & Guerrero, J. M. (2016) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2016.2583467 · Cited by 147
Self-citation
Cited by
Technology Development of Electric Vehicles: A Review
Sun, X., Li, Z., Wang, X., & Li, C. (2019) · Energies · doi:10.3390/en13010090 · Cited by 476
A Review of Modulation and Control Techniques for Multilevel Inverters in Traction Applications
Poorfakhraei, A., Narimani, M., & Emadi, A. (2021) · IEEE Access · doi:10.1109/access.2021.3056612 · Cited by 179
Metadata
- Authors
- Gan, C., Wu, J., Sun, Q., Kong, W., Li, H., & Hu, Y.
- Venue
- IEEE Access
- Published
- 2018
- Volume
- 6
- Pages
- 31430-31443
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2804947873
- Cited by
- 286
- References
- 22
- FWCI
- 8.94
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications. https://app.cochat.ai/papers/10.1109/access.2018.2837111
- The paper
- Gan, C., Wu, J., Sun, Q., Kong, W., Li, H., & Hu, Y. (2018). A Review on Machine Topologies and Control Techniques for Low-Noise Switched Reluctance Motors in Electric Vehicle Applications. IEEE Access. https://doi.org/10.1109/access.2018.2837111
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.