The DOI matches its Crossref record; 15 of the 15 references it cites were found in a registry or an index.
Novel Switched Reluctance Machine Configuration With Higher Number of Rotor Poles Than Stator Poles: Concept to Implementation
Abstract
There is a great demand for efficient, quiet, reliable, and cost-effective motor drives for propulsion systems in hybrid and plug-in hybrid electric vehicles. Owing to a rigid structure and the absence of magnetic source on the rotor, a switched reluctance machine (SRM) is inherently robust and cost effective. In spite of these advantages, several challenges in the control of this machine remain an issue, including high levels of torque ripple, acoustic noise, and a relatively low torque density. This paper presents a new family of SRMs which have higher number of rotor poles than stator poles. Using a newly defined pole design formula, several novel combinations of the stator-rotor poles have been proposed. From the simulation and experimental analysis of a prototype 6/10 configuration, it has been observed that this machine produces higher torque per unit volume and comparable torque ripple when compared to a conventional 6/4 SRM with similar number of phases and constraints in volume. The results presented in this paper make this family of machines a strong contender for survivable high-performance applications for automotive propulsion systems. The simulation and experimental results for the prototype 6/10 configuration have been presented and compared to a conventional 6/4 design for verification.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The state of the art of electric, hybrid, and fuel cell vehicles
Chan, C. C. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892489 · Cited by 1,987
Overview of Permanent-Magnet Brushless Drives for Electric and Hybrid Electric Vehicles
Chau, K. T., Chan, C. C., & Liu, C. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.918403 · Cited by 1,496
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461
Self-citationSwitched Reluctance Motors and Their Control
Miller, T. J. E. (1993) · Medical Entomology and Zoology · Cited by 1,300
Electric Motor Drive Selection Issues for HEV Propulsion Systems: A Comparative Study
Zeraoulia, M., Benbouzid, M. E. H., & Diallo, D. (2006) · IEEE Transactions on Vehicular Technology · doi:10.1109/tvt.2006.878719 · Cited by 691
Hybrid Electric Vehicles: Architecture and Motor Drives
Ehsani, M., Gao, Y., & Miller, J. M. (2007) · Proceedings of the IEEE · doi:10.1109/jproc.2007.892492 · Cited by 490
Propulsion system design of electric and hybrid vehicles
Ehsani, M., Rahman, K. M., & Toliyat, H. A. (1997) · IEEE Transactions on Industrial Electronics · doi:10.1109/41.557495 · Cited by 443
Making the case for applications of switched reluctance motor technology in automotive products
Krishnamurthy, M., Edrington, C. S., Emadi, A., Asadi, P., Ehsani, M., & Fahimi, B. (2006) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2006.872371 · Cited by 242
Self-citationPlug-in hybrid electric vehicle developments in the US: Trends, barriers, and economic feasibility
Wirasingha, S. G., Schofield, N., & Emadi, A. (2008) · IEEE Vehicle Power and Propulsion Conference (VPPC) · doi:10.1109/vppc.2008.4677702 · Cited by 158
Self-citationEhsani, M., Gao, Y., & Butler, K. L. (1999) · IEEE Transactions on Vehicular Technology · doi:10.1109/25.806770 · Cited by 112
Cited by
Making the Case for Electrified Transportation
Bilgin, B., Magne, P., Malysz, P., Yang, Y., Pantelic, V., Preindl, M., Korobkine, A., Jiang, W., Lawford, M., & Emadi, A. (2015) · IEEE Transactions on Transportation Electrification · doi:10.1109/tte.2015.2437338 · Cited by 455
Self-citationGan, C., Wu, J., Sun, Q., Kong, W., Li, H., & Hu, Y. (2018) · IEEE Access · doi:10.1109/access.2018.2837111 · Cited by 286
Metadata
- Authors
- Desai, P. C., Krishnamurthy, M., Schofield, N., & Emadi, A.
- Venue
- IEEE Transactions on Industrial Electronics
- Published
- 2010-02
- Volume
- 57
- Issue
- 2
- Pages
- 649-659
- ISSN
- 0278-0046 (ISSN-L)
- OpenAlex
- W2149184143
- Cited by
- 263
- References
- 15
- FWCI
- 11.88
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Novel Switched Reluctance Machine Configuration With Higher Number of Rotor Poles Than Stator Poles: Concept to Implementation. https://app.cochat.ai/papers/10.1109/tie.2009.2034678
- The paper
- Desai, P. C., Krishnamurthy, M., Schofield, N., & Emadi, A. (2010). Novel Switched Reluctance Machine Configuration With Higher Number of Rotor Poles Than Stator Poles: Concept to Implementation. IEEE Transactions on Industrial Electronics. https://doi.org/10.1109/tie.2009.2034678
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.