Weak Micro-Scratch Detection Based on Deep Convolutional Neural Network
Open accessThe DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Abstract
Metal component surfaces are random textured and non-smooth. There are many stains on the surface of metal component that are similar to the gray scale of the scratches. The scratches have non-uniform gray distribution, various shapes, and low contrast in their background, posing challenges in accurate scratch detection. This paper presents a method for detecting weak scratches on metal component surfaces based on deep convolutional neural networks (DCNNs). First, a DCNN is trained using labeled scratch images. Then, the scratches and some faults are detected by the trained DCNN, and most of the faults can be removed through properly thresholding based on the size of connected regions. Finally, the scratch length united in the number of pixels is obtained by the skeleton extraction. The experimental results show that the proposed method can effectively deal with background noise, thereby achieving accurate scratch detection.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Moreover, Song et al. [108] realized precise detection of weak scratches on metal surface by confusing deep CNN and skeleton extraction, the experimental results indicate its strong robustness to background noises.”
From Automated Visual Defect Detection for Flat Steel Surface: A Survey (2020) · cites this paper as [108]
Citations
Cites
U-Net: Convolutional Networks for Biomedical Image Segmentation
Ronneberger, O., Fischer, P., & Brox, T. (2015) · Lecture notes in computer science · doi:10.1007/978-3-319-24574-4_28 · Cited by 99,404
Adam: A Method for Stochastic Optimization
Kingma, D. P., & Ba, J. (2014) · arXiv · doi:10.48550/arxiv.1412.6980 · Cited by 98,946
Delving Deep into Rectifiers: Surpassing Human-Level Performance on ImageNet Classification
He, K., Zhang, X., Ren, S., & Sun, J. (2015) · 2015 IEEE International Conference on Computer Vision (ICCV) · doi:10.1109/iccv.2015.123 · Cited by 19,741 · cited 1×
“The experiment uses the Msra initialization method [21] to initialize the parameters.”
MethodVisualizing and understanding convolutional networks
Zeiler, M. D., & Fergus, R. (2014) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-10590-1_53 · Cited by 15,839 · cited 1×
“wider receiving domain and therefore capture global information [13].”
BackgroundFully convolutional networks for semantic segmentation
Shelhamer, E., Long, J., & Darrell, T. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2572683 · Cited by 11,898
Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks
Cha, Y., Choi, W., & Büyüköztürk, O. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12263 · Cited by 3,295 · cited 2×
“[15] combined deep convolutional neural network with sliding window technology to identify and detect cracks on concrete surface, and proved that the method is better than traditional Canny and Sobel edge detection algorithms.”
BackgroundMethodA fast parallel algorithm for thinning digital patterns
Zhang, T. Y., & Suen, C. Y. (1984) · Communications of the ACM · doi:10.1145/357994.358023 · Cited by 2,756 · cited 2×
“[19] T. Y. Zhang and C. Y. Suen, ‘‘A fast parallel algorithm for thinning digital patterns,’’ Commun.”
MethodLaplacian Pyramid Reconstruction and Refinement for Semantic Segmentation
Ghiasi, G., & Fowlkes, C. C. (2016) · Lecture Notes in Computer Science · doi:10.1007/978-3-319-46487-9_32 · Cited by 502
Steel defect classification with Max-Pooling Convolutional Neural Networks
Masci, J., Meier, U., Ciresan, D., Schmidhuber, J., & Fricout, G. (2012) · The 2012 International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.2012.6252468 · Cited by 345 · cited 1×
“[14] proposed a maximum pooled convolutional neural network method for supervising the classification of steel defects.”
MethodTexture segmentation using wavelet transform
Arivazhagan, S., & Ganesan, L. (2003) · Pattern Recognition Letters · doi:10.1016/j.patrec.2003.08.005 · Cited by 198 · cited 1×
“Texture features extracted from wavelet decomposition images are widely used for texture classification and segmentation [8], [9].”
MethodK3M: A universal algorithm for image skeletonization and a review of thinning techniques
Saeed, K., Tabędzki, M., Rybnik, M., & Adamski, M. (2010) · International Journal of Applied Mathematics and Computer Science · doi:10.2478/v10006-010-0024-4 · Cited by 193 · cited 1×
“In order to obtain the arc length information of the scratches, the scratch skeleton is extracted by the K3M algorithm [18].”
MethodDefect detection in magnetic tile images based on stationary wavelet transform
Yang, C., Liu, P., Yin, G., Jiang, H., & Li, X. (2016) · NDT & E International · doi:10.1016/j.ndteint.2016.04.006 · Cited by 63 · cited 1×
“[10] proposed a method of using stationary wavelet transform to detect low contrast defects in magnetic tile images under various illuminations.”
MethodTextile fabric defect detection based on low-rank representation
Li, P., Liang, J., Xu-bang, S., Zhao, M., & Sui, L. (2017) · Multimedia Tools and Applications · doi:10.1007/s11042-017-5263-z · Cited by 59 · cited 1×
“[5] proposed a fabric defect detection method based on low rank technique.”
MethodWeak scratch detection and defect classification methods for a large-aperture optical element
Tao, X., Xu, D., Zhang, Z., Zhang, F., Liu, X.-L., & Zhang, D. (2016) · Optics Communications · doi:10.1016/j.optcom.2016.10.062 · Cited by 52 · cited 1×
“[2] proposed a coarse-to-fine detection strategy of”
Automatic defect recognition of TFT array process using gray level co-occurrence matrix
Yang, S., Lin, C., Lin, S., & Chiang, H.-T. (2014) · Optik · doi:10.1016/j.ijleo.2013.11.070 · Cited by 41 · cited 1×
“[3] used the gray level co-occurrence matrix to obtain the defect characteristics of thin film transistors, and classified the defect features by neural network.”
MethodHao, Q., Zhang, X., Wang, Y., Shen, Y., & Makiš, V. (2018) · Journal of Sound and Vibration · doi:10.1016/j.jsv.2018.04.003 · Cited by 37 · cited 1×
“[12] combined wavelet transforms with improved adaptive line enhancement method to reduce background noise and enhance the image features of track defects to achieve the detection of track defects.”
MethodRail defect detection using Gabor filters with texture analysis
Vijaykumar, V. R., & Sangamithirai, S. (2015) · International Conference on Signal Processing, Communication and Networking (ICSCN) · doi:10.1109/icscn.2015.7219838 · Cited by 31 · cited 1×
“Vijaykumar and Angamithirai [7] enhance the difference between defect and defect background through Gabor filter, and realize the detection of track defects.”
BackgroundFabric defect detection based on the saliency map construction of target-driven feature
Guan, S., & Shi, H. (2017) · Journal of the Textile Institute · doi:10.1080/00405000.2017.1414669 · Cited by 22 · cited 2×
“[4] S. Guan and H. Shi, ‘‘Fabric defect detection based on the saliency map construction of target-driven feature,’’ J. Textile Inst., vol. 100, no. 9, pp. 1133–1142, 2017.”
MethodTexture description using different wavelet transforms based on statistical parameters
Raju, U. S. N., Kumar, V. V., Suresh, A., & Mani, M. R. (2008) · Cited by 13
Automatic damage detection of engineering ceramics ground surface based on texture analysis
Lin, B., Chen, S., Han, X., & Liang, X. (2013) · Transactions of Tianjin University · doi:10.1007/s12209-013-1937-4 · Cited by 5 · cited 1×
“[6] proposed a method of defect detection for ground with complex texture using Fourier transform.”
MethodDual-threshold algorithm study of weak-scratch extraction based on the filter and difference
Chen, 李. L., Yongying, 杨. Y., Haoliang, 熊. X., Dong, 刘. L., Shibin, 谢. X., Li, Y., Jian, 白. B., Yibing, 沈. S., Hongzhen, 姜. J., Xu, 刘. L., et al. (2015) · High Power Laser and Particle Beams · doi:10.3788/hplpb20152707.72004 · Cited by 3
Detecting fine scratches on smooth surfaces with multiscale wavelet representation
Yao, L., Wan, Y., Yao, M. H., & Xu, B. (2012) · Measurement Science and Technology · doi:10.1088/0957-0233/23/8/085603 · Cited by 1 · cited 1×
“[11] The multi-scale wavelet representation is used to obtain the features of the input image.”
Method
Research works printed but not linked: 1
- truong, 2017, Automatic image thresholding using Otsu’s method and entropy weighting scheme for surface defect detection, Soft Comput, 2, 4197
Cited by
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
“[108] realized precise detection of weak scratches on metal surface by confusing deep CNN and skeleton extraction, the experimental results indicate its strong robustness to background noises.”
BackgroundVisual-Based Defect Detection and Classification Approaches for Industrial Applications—A SURVEY
Czimmermann, T., Ciuti, G., Milazzo, M., Chiurazzi, M., Roccella, S., Oddo, C. M., & Dario, P. (2020) · Sensors · doi:10.3390/s20051459 · Cited by 441
An efficient lightweight convolutional neural network for industrial surface defect detection
Zhang, D., Hao, X., Wang, D., Qin, C., Zhao, B., Liang, L., & Liu, W. (2023) · Artificial Intelligence Review · doi:10.1007/s10462-023-10438-y · Cited by 208
Steel Surface Defect Recognition: A Survey
Wen, X., Shan, J., He, Y., & Song, K. (2022) · Coatings · doi:10.3390/coatings13010017 · Cited by 210
A Survey on Unsupervised Anomaly Detection Algorithms for Industrial Images
Cui, Y., Liu, Z., & Lian, S. (2023) · IEEE Access · doi:10.1109/access.2023.3282993 · Cited by 207
Metadata
- Authors
- Song, L., Lin, W., Yang, Y.-G., Zhu, X., Guo, Q., & Xi, J.
- Affiliations
- Tiangong University (CN)
- Key Laboratory of Advanced Electrical Engineering and Energy Technology, Tianjin Polytechnic University, Tianjin, China
- National-Local Joint Engineering Laboratory of Intelligent Manufacturing Oriented Automobile Die & Mould, Tianjin University of Technology and Education, Tianjin, China
- University of Wollongong (AU)
- Venue
- IEEE Access
- Published
- 2019
- Volume
- 7
- Pages
- 27547-27554
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W2917663261
- Cited by
- 61
- References
- 22
- Citations by year
- 2026: 3 · 2025: 6 · 2024: 6 · 2023: 9 · 2022: 16 · 2021: 10 · 2020: 10 · 2019: 1
- FWCI
- 6.82
- Type
- journal article
- Language
- en
- Open access
- gold
- doi.org
- Locations
- IEEE Access (publishedVersion)
- Research Online (University of Wollongong) (submittedVersion)
- DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
- Figshare (submittedVersion)
- Funders
- National Natural Science Foundation of China (61078041, 51806150)
- Natural Science Foundation of Tianjin City (16JCYBJC15400, 18JCQNJC04400)
- National Natural Science Foundation Committee
- Tianjin Research Program of Application Foundation and Advanced Technology
- State Key Laboratory of Precision Measurement Technology and Instruments (PIL1603)
- Tianjin University (TD13-5036)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Physical Sciences › Computer Science › Computer Vision and Pattern Recognition › Advanced Neural Network Applications
- Keywords
- scratch detection, deep convolutional neural networks, surface defects, background noise suppression, skeleton extraction
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.