The DOI matches its Crossref record; 257 of the 257 references it cites were found in a registry or an index.
A Review and Analysis of Automatic Optical Inspection and Quality Monitoring Methods in Electronics Industry
Open accessAbstract
Electronics industry is one of the fastest evolving, innovative, and most competitive industries. In order to meet the high consumption demands on electronics components, quality standards of the products must be well-maintained. Automatic optical inspection (AOI) is one of the non-destructive techniques used in quality inspection of various products. This technique is considered robust and can replace human inspectors who are subjected to dull and fatigue in performing inspection tasks. A fully automated optical inspection system consists of hardware and software setups. Hardware setup include image sensor and illumination settings and is responsible to acquire the digital image, while the software part implements an inspection algorithm to extract the features of the acquired images and classify them into defected and non-defected based on the user requirements. A sorting mechanism can be used to separate the defective products from the good ones. This article provides a comprehensive review of the various AOI systems used in electronics, micro-electronics, and opto-electronics industries. In this review the defects of the commonly inspected electronic components, such as semiconductor wafers, flat panel displays, printed circuit boards and light emitting diodes, are first explained. Hardware setups used in acquiring images are then discussed in terms of the camera and lighting source selection and configuration. The inspection algorithms used for detecting the defects in the electronic components are discussed in terms of the preprocessing, feature extraction and classification tools used for this purpose. Recent articles that used deep learning algorithms are also reviewed. The article concludes by highlighting the current trends and possible future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Items 201–257 of 257
Lin, H.-D. (2007) · Image and Vision Computing · doi:10.1016/j.imavis.2007.07.009 · Cited by 32
Directional textures auto-inspection using principal component analysis
Chen, S., & Perng, D. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-010-3141-1 · Cited by 32
Detection of pinhole defects on chips and wafers using DCT enhancement in computer vision systems
Lin, H.-D., & Ho, D.-C. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0614-3 · Cited by 31
Purandare, S., Zhu, J., Zhou, R., Popescu, G., Schwing, A. G., & Goddard, L. L. (2019) · Optics Express · doi:10.1364/oe.27.017743 · Cited by 31
Conductive particle detection via deep learning for ACF bonding in TFT-LCD manufacturing
Liu, E., Chen, K., Xiang, Z., & Zhang, J. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01494-9 · Cited by 31
A physics-based defects model and inspection algorithm for automatic visual inspection
Xie, Y., Ye, Y., Zhang, J., Liu, L., & Liu, L. (2013) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2013.06.006 · Cited by 30
Measuring Color Defects in Flat Panel Displays Using HDR Imaging and Appearance Modeling
Nam, G., Lee, H., Oh, S., et al. (2015) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2015.2485341 · Cited by 30
Kuo, C. J., Lo, W.-C., Huang, Y.-R., Tsai, H.-Y., Lee, C.-L., & Wu, H. (2017) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2017.10.004 · Cited by 30
Tsai, D., Chuang, S.-T., & Tseng, Y.-S. (2006) · International Journal of Production Research · doi:10.1080/00207540600622464 · Cited by 29
A Wavelet-Based Approach in Detecting Visual Defects on Semiconductor Wafer Dies
Yeh, C.-H., Wu, F.-C., Ji, W.-L., & Huang, C. (2010) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2010.2046108 · Cited by 29
Application of Two Hopfield Neural Networks for Automatic Four-Element LED Inspection
Chang, C., Li, C.-H., Lin, S.-Y., & Jeng, M. (2009) · IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews) · doi:10.1109/tsmcc.2009.2013817 · Cited by 29
Defect detection of IC wafer based on two-dimension wavelet transform
Liu, H., Zhou, W. H., Kuang, Q., Cao, L., & Gao, B. (2010) · Microelectronics Journal · doi:10.1016/j.mejo.2010.01.015 · Cited by 28
Applying PSO and OCBA to Minimize the Overkills and Re-Probes in Wafer Probe Testing
Horng, S., Yang, F., & Lin, S.-S. (2012) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2012.2200266 · Cited by 28
A Flexible PCB Inspection System Based on Statistical Learning
Liao, C.-T., Lee, W.-H., & Lai, S. (2010) · Journal of Signal Processing Systems · doi:10.1007/s11265-010-0556-8 · Cited by 28
Decision support in machine vision system for monitoring of TFT-LCD glass substrates manufacturing
Yousefian-Jazi, A., Ryu, J.-H., Yoon, S., & Liu, J. J. (2014) · Journal of Process Control · doi:10.1016/j.jprocont.2013.12.009 · Cited by 28
姜军, & 程俊 (2012) · Cited by 28
Kuo, C. J., Lai, C.-Y., Kao, C.-H., & Chiu, C.-H. (2017) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2017.09.017 · Cited by 28
Corner Point-Based Coarse–Fine Method for Surface-Mount Component Positioning
Bai, L., Yang, X., & Gao, H. (2017) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2017.2705078 · Cited by 27
Jian, C., Gao, J., & Ao, Y. (2016) · Multimedia Tools and Applications · doi:10.1007/s11042-016-4199-z · Cited by 25
An automatic aperture detection system for LED cup based on machine vision
Yang, Y., Lou, Y., Gao, M., et al. (2018) · Multimedia Tools and Applications · doi:10.1007/s11042-018-5639-8 · Cited by 25
TFT-LCD Mura Defect Detection Using Wavelet and Cosine Transforms
Chen, S.-L., & Chou, S.-T. (2008) · Journal of Advanced Mechanical Design Systems and Manufacturing · doi:10.1299/jamdsm.2.441 · Cited by 24
Computational intelligence in mass soldering of electronics – A survey
Liukkonen, M., Havia, E., & Hiltunen, Y. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.02.100 · Cited by 24
A new NDT technique based on bacterial cells to detect micro surface defects
Santos, T. G., Miranda, R. M., & de Carvalho, C. C. C. R. (2014) · NDT & E International · doi:10.1016/j.ndteint.2014.01.006 · Cited by 24
A Study of feature extraction algorithms for optical flow tracking
Nourani‐Vatani, N., Borges, P., & Roberts, J. M. (2012) · QUT ePrints (Queensland University of Technology) · Cited by 23
Defect detection of uneven brightness in low-contrast images using basis image representation
Tsneg, Y.-H., & Tsai, D. (2009) · Pattern Recognition · doi:10.1016/j.patcog.2009.09.006 · Cited by 23
Flaw detection of domed surfaces in LED packages by machine vision system
Lin, H.-D., & Chiu, S. W. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.05.080 · Cited by 22
Liu, Y., & Chen, Y.-J. (2011) · International Journal of Molecular Sciences · doi:10.3390/ijms12095762 · Cited by 22
A hybrid defect detection method for compact camera lens
Chang, C.-F., Wu, J., Chen, K.-J., & Hsu, M.-C. (2017) · Advances in Mechanical Engineering · doi:10.1177/1687814017722949 · Cited by 22
The feature extraction and analysis of flaw detection and classification in BGA gold-plating areas
Chiou, Y., Lin, C., & Chiou, B.-C. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.08.085 · Cited by 21
Duan, G., Wang, H., Liu, Z., & Chen, Y. (2012) · IEEE Transactions on Systems Man and Cybernetics Part C (Applications and Reviews) · doi:10.1109/tsmcc.2012.2216260 · Cited by 20
Defect detection using feature point matching for non-repetitive patterned images
Kim, H. W., & Yoo, S. I. (2012) · Pattern Analysis and Applications · doi:10.1007/s10044-012-0305-7 · Cited by 19
Enhanced residual noise estimation of low rank approximation for image denoising
Kim, D.-G., & Shamsi, Z. H. (2018) · Neurocomputing · doi:10.1016/j.neucom.2018.02.063 · Cited by 19
The Design and Implementation of an Embedded Real-Time Automated IC Marking Inspection System
Hsu, F.-H., & Shen, C.-A. (2018) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2018.2875920 · Cited by 19
A golden-block-based self-refining scheme for repetitive patterned wafer inspections
Guan, S.-U., Xie, P., & Li, H. (2003) · Machine Vision and Applications · doi:10.1007/s00138-002-0086-x · Cited by 18
The development of automated solder bump inspection using machine vision techniques
Wu, W., Hung, C.-W., & Yu, W. (2013) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-013-4994-x · Cited by 18
Usuki, S., Nishioka, H., Takahashi, S., & Takamasu, K. (2009) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-008-1901-y · Cited by 18
Stereo Vision Based Automated Solder Ball Height and Substrate Coplanarity Inspection
Li, J., Bennett, B. L., Karam, L. J., et al. (2015) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2015.2403836 · Cited by 18
Defect detection techniques robust to process variation in semiconductor inspection
Harada, M., Minekawa, Y., & Nakamae, K. (2019) · Measurement Science and Technology · doi:10.1088/1361-6501/aafd77 · Cited by 18
The Spatial Resolution Enhancement for a Thermogram Enabled by Controlled Subpixel Movements
Du, W., Addepalli, S., & Zhao, Y. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2932175 · Cited by 18
Logistic regression tree applied to classify PCB golden finger defects
Jiang, B. C., Wang, C.-C., & Chen, P. L. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-002-1500-2 · Cited by 17
Automatic Visual Inspection Of Printed Circuit Boards
Chin, R. T., Harlow, C. A., & Dwyer, S. J. (1979) · Proceedings of SPIE, the International Society for Optical Engineering/Proceedings of SPIE · doi:10.1117/12.956747 · Cited by 14
Chen, Y., Lin, T.-H., Chang, K.-H., & Chien, C. (2013) · Journal of Industrial and Production Engineering · doi:10.1080/21681015.2013.869512 · Cited by 14
An innovative blemish detection system for curved LED lenses
Chiu, Y.-S., & Lin, H.-D. (2012) · Expert Systems with Applications · doi:10.1016/j.eswa.2012.07.041 · Cited by 14
Vison-Based 3D Shape Measurement System for Transparent Microdefect Characterization
Deng, Y., Pan, X., Wang, X., & Zhong, X. (2019) · IEEE Access · doi:10.1109/access.2019.2931194 · Cited by 14
OLED panel defect detection using local inlier-outlier ratios and modified LBP
Sindagi, V. A., & Srivastava, S. (2015) · doi:10.1109/mva.2015.7153170 · Cited by 13
Automated inspection of IC wafer contamination
Zoroofi, R. A., Taketani, H., Tamura, S., Sato, Y., & Sekiya, K. (2001) · Pattern Recognition · doi:10.1016/s0031-3203(00)00070-4 · Cited by 13
Tsai, D., & Chuang, S.-T. (2008) · Machine Vision and Applications · doi:10.1007/s00138-008-0136-0 · Cited by 13
Graphic supervisory control of an automatic optical inspection for LED properties
Fung, R., Yang, C., & Lai, C.-T. (2011) · Measurement · doi:10.1016/j.measurement.2011.04.003 · Cited by 11
Regularized Auto-Encoder-Based Separation of Defects from Backgrounds for Inspecting Display Devices
Jo, H., & Kim, J. (2019) · Electronics · doi:10.3390/electronics8050533 · Cited by 11
A hybrid defect detection for in-tray semiconductor chip
Chen, C., Huang, C.-L., & Yeh, C.-W. (2012) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-012-4149-5 · Cited by 10
Feature Extraction and Template Matching Algorithms Classification for PCB Fiducial Verification
Fonseka, S., & Jayasinghe, J. A. K. S. (2018) · Journal of Achievements of Materials and Manufacturing Engineering · doi:10.5604/01.3001.0011.6015 · Cited by 10
Liu, H.-W., Chen, S., & Perng, D. (2016) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2016.2568238 · Cited by 9
A novel method for surface defect inspection of optic cable with short-wave infrared illuminance
Chen, X., Liu, N., You, B., & Xiao, B. (2016) · Infrared Physics & Technology · doi:10.1016/j.infrared.2016.07.001 · Cited by 8
A Novel Defect Inspection Method for Semiconductor Wafer Based on Magneto-Optic Imaging
Pan, Z., Chen, L., Li, W., Zhang, G., & Wu, P. (2012) · Journal of Low Temperature Physics · doi:10.1007/s10909-012-0671-y · Cited by 6
Lin, J.-S. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2011.08.144 · Cited by 6
A Fast Luminance Inspector for Backlight Modules Based on Multiple Kernel Support Vector Regression
Lin, W.-J., & Jhuo, S.-S. (2014) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2014.2329503 · Cited by 6
Localization of component lead inside a THT solder joint for solder defects classification
Fonseka, C. L. S. C., & Jayasinghe, J. A. K. S. (2017) · Journal of Achievements of Materials and Manufacturing Engineering · doi:10.5604/01.3001.0010.7033 · Cited by 5
Cited by
Smart manufacturing powered by recent technological advancements: A review
Sahoo, S., & Lo, C.-Y. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.06.008 · Cited by 292
PCB defect detection algorithm based on CDI-YOLO
Xiao, G., Hou, S., & Zhou, H. (2024) · Scientific Reports · doi:10.1038/s41598-024-57491-3 · Cited by 113
Smart Machine Vision System to Improve Decision-Making on the Assembly Line
Silva, C. A. D. S., & Paladini, E. P. (2025) · Machines · doi:10.3390/machines13020098 · Cited by 13
Metadata
- Authors
- Ebayyeh, A. A. R. M. A., & Mousavi, A.
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 183192-183271
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3092466439
- Cited by
- 310
- References
- 257
- FWCI
- 13.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.