CoChat

Smart Machine Vision System to Improve Decision-Making on the Assembly Line

Open access
Silva, Carlos Americo de Souza, Paladini, Edson Pacheco · 2025 · Machines

The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.

Abstract

Technological advances in the production of printed circuit boards (PCBs) are increasing the number of components inserted on the surface. This has led the electronics industry to seek improvements in their inspection processes, often making it necessary to increase the level of automation on the production line. The use of machine vision for quality inspection within manufacturing processes has increasingly supported decision making in the approval or rejection of products outside of the established quality standards. This study proposes a hybrid smart-vision inspection system with a machine vision concept and vision sensor equipment to verify 24 components and eight screw threads. The goal of this study is to increase automated inspection reliability and reduce non-conformity rates in the manufacturing process on the assembly line of automotive products using machine vision. The system uses a camera to collect real-time images of the assembly fixtures, which are connected to a CMOS color vision sensor. The method is highly accurate in complex industry environments and exhibits specific feasibility and effectiveness. The results indicate high performance in the failure mode defined during this study, obtaining the best inspection performance through a strategy using Vision Builder for automated inspection. This approach reduced the action priority by improving the failure mode and effect analysis (FMEA) method.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.3390/machines13020098

Cites

39 of 39 references verified0 citation errors · 0 not checkable

Statistics

Figures

Image 1
CC-BY · From the PDF
Figure 1 PRISMA methodology. Figure 1. PRISMA methodology.
Figure 1 PRISMA methodology. Figure 1. PRISMA methodology.CC-BY · From the PDF
Figure 3 Publication by country.
Figure 3 Publication by country.CC-BY · From the PDF
Figure 4 Keyword co-occurrence network based on the bibliometric research. Figure 4. Keyword co-occurrence network based on the bibliometric research.
Figure 4 Keyword co-occurrence network based on the bibliometric research. Figure 4. Keyword co-occurrence network based on the bibliometric research.CC-BY · From the PDF
Figure 5 Word cloud of the bibliometric research. Figure 5. Word cloud of the bibliometric research.
Figure 5 Word cloud of the bibliometric research. Figure 5. Word cloud of the bibliometric research.CC-BY · From the PDF
Figure 7 FMEA process flow for serial production. Figure 7. FMEA process flow for serial production.
Figure 7 FMEA process flow for serial production. Figure 7. FMEA process flow for serial production.CC-BY · From the PDF
Image 7
CC-BY · From the PDF
Figure 8 Comparison of manual and machine vision inspection processes. Figure 8. Comparison of manual and machine vision inspection processes.
Figure 8 Comparison of manual and machine vision inspection processes. Figure 8. Comparison of manual and machine vision inspection processes.CC-BY · From the PDF
Image 9
CC-BY · From the PDF
Figure 9 Hybrid smart vision inspection framework. Figure 9. Hybrid smart vision inspection framework.
Figure 9 Hybrid smart vision inspection framework. Figure 9. Hybrid smart vision inspection framework.CC-BY · From the PDF
Figure 11 Inspection sequence strategy. Figure 11. Inspection sequence strategy.
Figure 11 Inspection sequence strategy. Figure 11. Inspection sequence strategy.CC-BY · From the PDF
Figure 12 Chassis holes reflecting the light. Figure 12. Chassis holes reflecting the light.
Figure 12 Chassis holes reflecting the light. Figure 12. Chassis holes reflecting the light.CC-BY · From the PDF
Figure 13 Defect results of PCBA inspection. Figure 13. Defect results of PCBA inspection. Figure 13. Defect results of PCBA inspection.
Figure 13 Defect results of PCBA inspection. Figure 13. Defect results of PCBA inspection. Figure 13. Defect results of PCBA inspection.CC-BY · From the PDF
Image 14
CC-BY · From the PDF
Figure 15 Approved results of a screw hole based on the reflection in the thread of the hole. Figure 15. Approved results of a screw hole based on the reflection in the thread of the hole. Figure 15. Approved results of a screw hole based on the reflection in the thread of the hole.
Figure 15 Approved results of a screw hole based on the reflection in the thread of the hole. Figure 15. Approved results of a screw hole based on the reflection in the thread of the hole. Figure 15. Approved results of a screw hole based on the reflection in the thread of the hole.CC-BY · From the PDF
Image 16
CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 39 references

Cited by

See all 16

Metadata

Authors
Silva, C. A. D. S., & Paladini, E. P.
Affiliations
  • Industrial and Systems Engineering Department, University Federal of Santa Catarina–UFSC, Florianópolis 88040-900, SC, Brazil
  • Universidade Federal de Santa Catarina (BR)
Venue
Machines
Publisher
MDPI AG
Published
2025-01-27
Volume
13
Issue
2
Pages
98
ISSN
2075-1702 (ISSN-L)
OpenAlex
W4406905291
Cited by
13
References
39
Citations by year
2026: 8 · 2025: 5
FWCI
6.39
Type
journal article
Language
en
Open access
Locations
  • Machines (publishedVersion, cc-by)
  • Preprints.org (acceptedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Topics
  • Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
  • Physical Sciences › Engineering › Control and Systems Engineering › Robot Manipulation and Learning
  • Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
Keywords
machine vision, printed circuit board assembly, automated visual inspection, component inspection, automotive electronics manufacturing, quality inspection, failure mode and effects analysis

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Smart Machine Vision System to Improve Decision-Making on the Assembly Line. https://app.cochat.ai/papers/10.3390/machines13020098
The paper
Silva, C. A. D. S., & Paladini, E. P. (2025). Smart Machine Vision System to Improve Decision-Making on the Assembly Line. Machines. https://doi.org/10.3390/machines13020098

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.