The DOI matches its Crossref record; 257 of the 257 references it cites were found in a registry or an index.
A Review and Analysis of Automatic Optical Inspection and Quality Monitoring Methods in Electronics Industry
Open accessAbstract
Electronics industry is one of the fastest evolving, innovative, and most competitive industries. In order to meet the high consumption demands on electronics components, quality standards of the products must be well-maintained. Automatic optical inspection (AOI) is one of the non-destructive techniques used in quality inspection of various products. This technique is considered robust and can replace human inspectors who are subjected to dull and fatigue in performing inspection tasks. A fully automated optical inspection system consists of hardware and software setups. Hardware setup include image sensor and illumination settings and is responsible to acquire the digital image, while the software part implements an inspection algorithm to extract the features of the acquired images and classify them into defected and non-defected based on the user requirements. A sorting mechanism can be used to separate the defective products from the good ones. This article provides a comprehensive review of the various AOI systems used in electronics, micro-electronics, and opto-electronics industries. In this review the defects of the commonly inspected electronic components, such as semiconductor wafers, flat panel displays, printed circuit boards and light emitting diodes, are first explained. Hardware setups used in acquiring images are then discussed in terms of the camera and lighting source selection and configuration. The inspection algorithms used for detecting the defects in the electronic components are discussed in terms of the preprocessing, feature extraction and classification tools used for this purpose. Recent articles that used deep learning algorithms are also reviewed. The article concludes by highlighting the current trends and possible future research directions.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Deep Residual Learning for Image Recognition
He, K., Zhang, X., Ren, S., & Sun, J. (2016) · 2016 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2016.90 · Cited by 235,474
Very Deep Convolutional Networks for Large-Scale Image Recognition
Simonyan, K., & Zisserman, A. (2014) · arXiv · doi:10.48550/arxiv.1409.1556 · Cited by 114,148
ImageNet classification with deep convolutional neural networks
Krizhevsky, A., Sutskever, I., & Hinton, G. E. (2017) · Communications of the ACM · doi:10.1145/3065386 · Cited by 112,155
U-Net: Convolutional Networks for Biomedical Image Segmentation
Ronneberger, O., Fischer, P., & Brox, T. (2015) · Lecture notes in computer science · doi:10.1007/978-3-319-24574-4_28 · Cited by 99,404
Gradient-based learning applied to document recognition
Lecun, Y., Bottou, L., Bengio, Y., & Haffner, P. (1998) · Proceedings of the IEEE · doi:10.1109/5.726791 · Cited by 58,805
Densely Connected Convolutional Networks
Huang, G., Liu, Z., Van Der Maaten, L., & Weinberger, K. Q. (2017) · 2017 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2017.243 · Cited by 48,566
A Threshold Selection Method from Gray-Level Histograms
Otsu, N. (1979) · IEEE Transactions on Systems, Man, and Cybernetics · doi:10.1109/tsmc.1979.4310076 · Cited by 43,398
Fully convolutional networks for semantic segmentation
Long, J., Shelhamer, E., & Darrell, T. (2015) · 2015 IEEE Conference on Computer Vision and Pattern Recognition (CVPR) · doi:10.1109/cvpr.2015.7298965 · Cited by 38,834
SegNet: A Deep Convolutional Encoder-Decoder Architecture for Image Segmentation
Badrinarayanan, V., Kendall, A., & Cipolla, R. (2017) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2016.2644615 · Cited by 19,631
Labaca-Castro, R. (2023) · Machine Learning under Malware Attack · doi:10.1007/978-3-658-40442-0_9 · Cited by 19,272
GAN(Generative Adversarial Nets)
(2017) · Journal of Japan Society for Fuzzy Theory and Intelligent Informatics · doi:10.3156/jsoft.29.5_177_2 · Cited by 19,270
Scale-space and edge detection using anisotropic diffusion
Perona, P., & Malik, J. (1990) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.56205 · Cited by 12,119
Chan, T. F., & Vese, L. A. (2001) · IEEE Transactions on Image Processing · doi:10.1109/83.902291 · Cited by 10,304
Beyond a Gaussian Denoiser: Residual Learning of Deep CNN for Image Denoising
Zhang, K., Zuo, W., Chen, Y., Meng, D., & Zhang, L. (2017) · IEEE Transactions on Image Processing · doi:10.1109/tip.2017.2662206 · Cited by 8,983
A comparison of methods for multiclass support vector machines
Hsu, C.-W., & Lin, C.-J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/72.991427 · Cited by 6,838
Statistical pattern recognition: a review
Jain, A. K., Duin, P. W., & Mao, J. (2000) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.824819 · Cited by 6,767
Artificial neural networks: a tutorial
Jain, A. K., Mao, J., & Mohiuddin, K. M. (1996) · Computer · doi:10.1109/2.485891 · Cited by 4,946
Deep Learning‐Based Crack Damage Detection Using Convolutional Neural Networks
Cha, Y., Choi, W., & Büyüköztürk, O. (2017) · Computer-Aided Civil and Infrastructure Engineering · doi:10.1111/mice.12263 · Cited by 3,295
Deep learning for visual understanding: A review
Guo, Y., Liu, Y., Oerlemans, A., Lao, S., Wu, S., & Lew, M. S. (2016) · Neurocomputing · doi:10.1016/j.neucom.2015.09.116 · Cited by 2,504
Training support vector machines: an application to face detection
Osuna, E., Freund, R., & Girosit, F. (2002) · Proceedings of IEEE Computer Society Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.1997.609310 · Cited by 2,486
Weighted Nuclear Norm Minimization with Application to Image Denoising
Gu, S., Zhang, L., Zuo, W., & Feng, X. (2014) · 2014 IEEE Conference on Computer Vision and Pattern Recognition · doi:10.1109/cvpr.2014.366 · Cited by 2,316 · cited 1×
“tion [323], and weighted nuclear norm minimization [324] are also used in literature.”
MethodRajaraman, A., & Ullman, J. D. (2011) · Cambridge University Press eBooks · doi:10.1017/cbo9781139058452 · Cited by 2,262
Face recognition by independent component analysis
Bartlett, M. S., Movellan, J. R., & Sejnowski, T. J. (2002) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2002.804287 · Cited by 1,930
Review of Deep Learning Algorithms and Architectures
Shrestha, A., & Mahmood, A. (2019) · IEEE Access · doi:10.1109/access.2019.2912200 · Cited by 1,883 · cited 5×
“A special case of DNNs is when the matrix multiplications include convolutional filter operations, which is common in DNNs that are designed for image and video analysis.”
BackgroundInfluentialTüceryan, M., & Jain, A. K. (1993) · Cited by 1,837
Data Clustering: Theory, Algorithms, and Applications
Gan, G., Ma, C., & Wu, J. (2007) · Society for Industrial and Applied Mathematics eBooks · doi:10.1137/1.9780898718348 · Cited by 1,562
Deep Learning With Edge Computing: A Review
Chen, J., & Ran, X. (2019) · Proceedings of the IEEE · doi:10.1109/jproc.2019.2921977 · Cited by 1,540 · cited 1×
“and speed of the detection process remarkably [18], [19].”
BackgroundDeep Learning Applications in Medical Image Analysis
Ker, J., Wang, L., Rao, J., & Lim, T. (2018) · IEEE Access · doi:10.1109/access.2017.2788044 · Cited by 1,481
ST-DBSCAN: An algorithm for clustering spatial–temporal data
Birant, D., & Kut, A. (2007) · Data & Knowledge Engineering · doi:10.1016/j.datak.2006.01.013 · Cited by 1,430
Machine learning in manufacturing: Advantages, challenges, and applications
Wuest, T., Weimer, D., Irgens, C., & Thoben, K.-D. (2016) · Production & Manufacturing Research · doi:10.1080/21693277.2016.1192517 · Cited by 1,319
A survey on image segmentation
Fu, K. S., & Mui, J. K. (1981) · Pattern Recognition · doi:10.1016/0031-3203(81)90028-5 · Cited by 1,203
A global averaging method for dynamic time warping, with applications to clustering
Petitjean, F., Ketterlin, A., & Gançarski, P. (2011) · Pattern Recognition · doi:10.1016/j.patcog.2010.09.013 · Cited by 1,138
Improving quality inspection of food products by computer vision––a review
Brosnan, T., & Sun, D.-W. (2004) · Journal of Food Engineering · doi:10.1016/s0260-8774(03)00183-3 · Cited by 1,011
Data Mining and Analytics in the Process Industry: The Role of Machine Learning
Ge, Z., Song, Z., Ding, S. X., & Huang, B. (2017) · IEEE Access · doi:10.1109/access.2017.2756872 · Cited by 922 · cited 2×
“Generally speaking, the output value for the predicted data sample is usually determined by estimating the mean value of its k nearest neighbors [361].”
BackgroundA survey on industrial vision systems, applications and tools
Malamas, E. N., Petrakis, E. G. M., Zervakis, M., Petit, L., & Legat, J.-D. (2003) · Image and Vision Computing · doi:10.1016/s0262-8856(02)00152-x · Cited by 797
A review of non-destructive testing methods of composite materials
Gholizadeh, S. (2016) · Procedia Structural Integrity · doi:10.1016/j.prostr.2016.02.008 · Cited by 795
The Alternating Decision Tree Learning Algorithm
Freund, Y., & Mason, L. (1999) · Cited by 773
A sparse auto-encoder-based deep neural network approach for induction motor faults classification
Sun, W., Shao, S., Zhao, R., Yan, R., Zhang, X., & Chen, X. (2016) · Measurement · doi:10.1016/j.measurement.2016.04.007 · Cited by 698
2D-LDA: A statistical linear discriminant analysis for image matrix
Li, M., & Yuan, B. (2005) · Pattern Recognition Letters · doi:10.1016/j.patrec.2004.09.007 · Cited by 680
Face recognition using kernel direct discriminant analysis algorithms
Lu, J., Plataniotis, K. N., & Venetsanopoulos, A. N. (2003) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2002.806629 · Cited by 608
A comparative performance study of several global thresholding techniques for segmentation
Lee, S. U., Chung, S. Y., & Park, R. (1990) · Computer Vision Graphics and Image Processing · doi:10.1016/0734-189x(90)90053-x · Cited by 568
Generative adversarial networks for data augmentation in machine fault diagnosis
Shao, S., Wang, P., & Yan, R. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.01.001 · Cited by 556
Automatic thresholding for defect detection
Ng, H.-F. (2006) · Pattern Recognition Letters · doi:10.1016/j.patrec.2006.03.009 · Cited by 552
A Review of Recent Advances in Surface Defect Detection using Texture analysis Techniques
Xie, X. (2008) · ELCVIA Electronic Letters on Computer Vision and Image Analysis · doi:10.5565/rev/elcvia.268 · Cited by 500
Improved versions of learning vector quantization
Kohonen, T. (1990) · International Joint Conference on Neural Networks (IJCNN) · doi:10.1109/ijcnn.1990.137622 · Cited by 500
A comprehensive review for industrial applicability of artificial neural networks
Meireles, M. R. G., Almeida, P. E. M., & Simoes, M. G. (2003) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2003.812470 · Cited by 482
Uğuz, H. (2011) · Knowledge-Based Systems · doi:10.1016/j.knosys.2011.04.014 · Cited by 460
Visual-Based Defect Detection and Classification Approaches for Industrial Applications—A SURVEY
Czimmermann, T., Ciuti, G., Milazzo, M., Chiurazzi, M., Roccella, S., Oddo, C. M., & Dario, P. (2020) · Sensors · doi:10.3390/s20051459 · Cited by 441
Leskovec, J., Rajaraman, A., & Ullman, J. D. (2020) · Cambridge University Press eBooks · doi:10.1017/9781108684163 · Cited by 424
TUCERYAN, M., & JAIN, A. K. (1993) · Handbook of Pattern Recognition and Computer Vision · doi:10.1142/9789814343138_0010 · Cited by 417
Wafer Map Defect Pattern Classification and Image Retrieval Using Convolutional Neural Network
Nakazawa, T., & Kulkarni, D. V. (2018) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2018.2795466 · Cited by 408
Automated Visual Inspection: A Survey
Chin, R. T., & Harlow, C. A. (1982) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.1982.4767309 · Cited by 400 · cited 3×
“Chen and Harlow in [13] gave six productivity and efficiency reasons for using”
BackgroundMethodWafer Map Failure Pattern Recognition and Similarity Ranking for Large-Scale Data Sets
Wu, M.-J., Jang, J.-S. R., & Chen, J.-L. (2015) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2014.2364237 · Cited by 400
Robust principal component analysis for computer vision
De la Torre, F., & Black, M. J. (2002) · Proceedings Eighth IEEE International Conference on Computer Vision. ICCV 2001 · doi:10.1109/iccv.2001.937541 · Cited by 387
Camera as the instrument: the rising trend of vision based measurement
Shirmohammadi, S., & Ferrero, A. (2014) · IEEE Instrumentation & Measurement Magazine · doi:10.1109/mim.2014.6825388 · Cited by 380
Vision-based detection of loosened bolts using the Hough transform and support vector machines
Cha, Y.-J., You, K., & Choi, W. (2016) · Automation in Construction · doi:10.1016/j.autcon.2016.06.008 · Cited by 328
Robot Guidance Using Machine Vision Techniques in Industrial Environments: A Comparative Review
Pérez, L., Rodríguez, Í., Rodríguez, N., Usamentiaga, R., & García, D. (2016) · Sensors · doi:10.3390/s16030335 · Cited by 318
Machine learning-based imaging system for surface defect inspection
Park, J.-K., Kwon, B.-K., Park, J.-H., & Kang, D.-J. (2016) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-016-0039-x · Cited by 311
An Unsupervised-Learning-Based Approach for Automated Defect Inspection on Textured Surfaces
Mei, S., Yang, H., & Yin, Z. (2018) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2018.2795178 · Cited by 308
Automated visual inspection in the semiconductor industry: A survey
Huang, S.-H., & Pan, Y.-C. (2015) · Computers in Industry · doi:10.1016/j.compind.2014.10.006 · Cited by 307
Cheon, S., Lee, H., Kim, C. O., & Lee, S. H. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2902657 · Cited by 304
Machine vision intelligence for product defect inspection based on deep learning and Hough transform
Wang, J., Fu, P., & Gao, R. X. (2019) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2019.03.002 · Cited by 288
Smart Machining Process Using Machine Learning: A Review and Perspective on Machining Industry
Kim, D.-H., Kim, T. J. Y., Wang, X., Kim, M., Quan, Y.-J., Oh, J. W., Min, S.-H., Kim, H., Bhandari, B., Yang, I., et al. (2018) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-018-0057-y · Cited by 286
Automatic surface defect detection for mobile phone screen glass based on machine vision
Jian, C., Gao, J., & Ao, Y. (2017) · Applied Soft Computing · doi:10.1016/j.asoc.2016.10.030 · Cited by 242
Automated defect inspection of LED chip using deep convolutional neural network
Lin, H., Li, B., Wang, X., Shu, Y., & Niu, S. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-018-1415-x · Cited by 241 · cited 2×
“in [47] used CNN (called LEDNet) for inspecting LED chips defects.”
BackgroundMethodSaqlain, M., Jargalsaikhan, B., & Lee, J. Y. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2904306 · Cited by 234
Neural network based detection of local textile defects
Kumar, A. (2003) · Pattern Recognition · doi:10.1016/s0031-3203(03)00005-0 · Cited by 229
A neural-network approach to recognize defect spatial pattern in semiconductor fabrication
Chen, F.-L., & Liu, S.-F. (2000) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/66.857947 · Cited by 229
Classification of Mixed-Type Defect Patterns in Wafer Bin Maps Using Convolutional Neural Networks
Kyeong, K., & Kim, H. (2018) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2018.2841416 · Cited by 228
Saqlain, M., Abbas, Q., & Lee, J. Y. (2020) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2020.2994357 · Cited by 211
Piao, M., Jin, C. H., Lee, J. Y., & Byun, J.-Y. (2018) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2018.2806931 · Cited by 195
Hsu, S.-C., & Chien, C.-F. (2007) · International Journal of Production Economics · doi:10.1016/j.ijpe.2006.05.015 · Cited by 189
Defect detection on semiconductor wafer surfaces
Shankar, N. G., & Zhong, Z. W. (2004) · Microelectronic Engineering · doi:10.1016/j.mee.2004.12.003 · Cited by 188
Xue-wu, Z., Yan-qiong, D., Yan-yun, L., Ai-ye, S., & Rui-yu, L. (2011) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.11.030 · Cited by 188
Yang, H., Chen, Y., Song, K., & Yin, Z. (2019) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2018.2886031 · Cited by 176
Machine-learning techniques and their applications in manufacturing
Pham, D. T., & Afify, A. A. (2005) · Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture · doi:10.1243/095440505x32274 · Cited by 170
Acciani, G., Brunetti, G., & Fornarelli, G. (2006) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2006.877265 · Cited by 168
Yu, J., & Lu, X. (2016) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2015.2497264 · Cited by 167
Nakazawa, T., & Kulkarni, D. V. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2897690 · Cited by 158
Soldering defect detection in automatic optical inspection
Dai, W., Mujeeb, A., Erdt, M., & Sourin, A. (2020) · Advanced Engineering Informatics · doi:10.1016/j.aei.2019.101004 · Cited by 158
A new sampling method for classifying imbalanced data based on support vector machine ensemble
Jian, C., Gao, J., & Ao, Y. (2016) · Neurocomputing · doi:10.1016/j.neucom.2016.02.006 · Cited by 157
Automatic defect inspection for LCDs using singular value decomposition
Lu, C.-J., & Tsai, D. (2004) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-003-1832-6 · Cited by 150
Wang, J., Yang, Z., Zhang, J., Zhang, Q., & Chien, W.-T. K. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2925361 · Cited by 148
Fabric Defect Detection Using Modified Local Binary Patterns
Tajeripour, F., Kabir, E., & Sheikhi, A. (2007) · EURASIP Journal on Advances in Signal Processing · doi:10.1155/2008/783898 · Cited by 146
A Review and Perspective on Control Charting with Image Data
Megahed, F. M., Woodall, W. H., & Camelio, J. A. (2011) · Journal of Quality Technology · doi:10.1080/00224065.2011.11917848 · Cited by 145
Automatic ultrasonic inspection for internal defect detection in composite materials
D’Orazio, T., Leo, M., Distante, A., et al. (2007) · NDT & E International · doi:10.1016/j.ndteint.2007.08.001 · Cited by 145
Detection of Spatial Defect Patterns Generated in Semiconductor Fabrication Processes
Yuan, T., Kuo, W., & Bae, S. J. (2011) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2011.2154870 · Cited by 143
Defect Detection in Electronic Surfaces Using Template-Based Fourier Image Reconstruction
Tsai, D., & Huang, C.-K. (2018) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2018.2873744 · Cited by 142
A Novel DBSCAN-Based Defect Pattern Detection and Classification Framework for Wafer Bin Map
Jin, C., Na, H. J., Piao, M., Pok, G., & Ryu, K. H. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2916835 · Cited by 135
Automated inspection of PCB components using a genetic algorithm template-matching approach
Crispin, A. J., & Rankov, V. (2006) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-006-0730-0 · Cited by 133
A multistage adaptive thresholding method
Yan, F., Zhang, H., & Kube, C. R. (2004) · Pattern Recognition Letters · doi:10.1016/j.patrec.2004.11.003 · Cited by 127
Wang, Q., Zhou, X., Wang, C., Liu, Z., Huang, J., Zhou, Y., Li, C., Zhuang, H., & Cheng, J. (2019) · IEEE Access · doi:10.1109/access.2019.2896409 · Cited by 125
Soto, J. A. C., Tavakolizadeh, F., & Gyulai, D. (2019) · International Journal of Computer Integrated Manufacturing · doi:10.1080/0951192x.2019.1571238 · Cited by 123
Wafer Defect Pattern Recognition and Analysis Based on Convolutional Neural Network
Yu, N., Xu, Q., & Wang, H. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2937793 · Cited by 120
Wang, W.-C., Chen, S.-L., Chen, L.-B., & Chang, W.-J. (2017) · IEEE Access · doi:10.1109/access.2016.2631658 · Cited by 118
Wafer Classification Using Support Vector Machines
Baly, R., & Hajj, H. M. (2012) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2012.2196058 · Cited by 117
Liu, Y., Jiang, C., & Zhao, H. (2017) · Decision Support Systems · doi:10.1016/j.dss.2017.10.009 · Cited by 115
A Deep Learning Model for Robust Wafer Fault Monitoring With Sensor Measurement Noise
Lee, H., Kim, Y., & Kim, C. O. (2016) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2016.2628865 · Cited by 114
A neural-network approach for semiconductor wafer post-sawing inspection
Su, C., Yang, T., & Ke, C.-M. (2002) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/66.999602 · Cited by 113
Transfer-Learning-Based Online Mura Defect Classification
Yang, H. S., Mei, S., Song, K., Tao, B., & Yin, Z. (2017) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2017.2777499 · Cited by 108
Yu, J., Zheng, X., & Liu, J. (2019) · Computers in Industry · doi:10.1016/j.compind.2019.04.015 · Cited by 105
Ebey, C., & Plotnick, R. E. (2008) · Computers & Geosciences · doi:10.1016/j.cageo.2008.01.006 · Cited by 103
Automatic solder joint inspection
Bartlett, S. L., Besl, P. J., Cole, C. L., Jain, R., Mukherjee, D., & Skifstad, K. D. (1988) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.3865 · Cited by 103
Printed circuit board inspection using image analysis
Loh, H., & Lu, M.-S. (1999) · IEEE Transactions on Industry Applications · doi:10.1109/28.753638 · Cited by 102
Cavallaro, G., Riedel, M., Richerzhagen, M., Benediktsson, J. A., & Plaza, A. (2015) · IEEE Journal of Selected Topics in Applied Earth Observations and Remote Sensing · doi:10.1109/jstars.2015.2458855 · Cited by 101
Automatic Detection of Region-Mura Defect in TFT-LCD
Lee, J. Y., & Yoo, S. I. (2004) · IEICE Transactions on Information and Systems · Cited by 99
Solid waste bin level detection using gray level co-occurrence matrix feature extraction approach
Arebey, M., Hannan, M. A., Begum, R. A., & Basri, H. (2012) · Journal of Environmental Management · doi:10.1016/j.jenvman.2012.03.035 · Cited by 99
A rapid recognition method for electronic components based on the improved yolo-v3 network
Huang, R., Gu, J., Sun, X., Hou, Y., & Uddin, S. (2019) · Electronics · doi:10.3390/electronics8080825 · Cited by 94
Classification of Solder Joint Using Feature Selection Based on Bayes and Support Vector Machine
Wu, H., Zhang, X., Xie, H., Kuang, Y., & Gaofei, O. (2013) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2012.2231902 · Cited by 92
Adly, F., Alhussein, O., Yoo, P. D., Al-Hammadi, Y., Taha, K., Muhaidat, S., Jeong, Y., Lee, U.-H., & Ismail, M. (2015) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2015.2481719 · Cited by 92
Detection and clustering of mixed-type defect patterns in wafer bin maps
Kim, J.-H., Lee, Y., & Kim, H. (2017) · IISE Transactions · doi:10.1080/24725854.2017.1386337 · Cited by 91
Defect spatial pattern recognition using a hybrid SOM–SVM approach in semiconductor manufacturing
Li, T.-S., & Huang, C.-L. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.09.023 · Cited by 90
A Shift-Tolerant Dissimilarity Measure for Surface Defect Detection
Tsai, D., Chiang, I.-Y., & Tsai, Y.-H. (2011) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2011.2166797 · Cited by 88
*, B. C. J., Wang, C.-C., & Liu, H.-C. (2005) · International Journal of Production Research · doi:10.1080/00207540412331285832 · Cited by 88
Automatic optical inspection for detecting defects on printed circuit board inner layers
Rau, H., & Wu, C. (2005) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-004-2299-9 · Cited by 86
Fast Support Vector Data Descriptions for Novelty Detection
Liu, Y., Liu, Y.-C., & Chen, Y.-J. (2010) · IEEE Transactions on Neural Networks · doi:10.1109/tnn.2010.2053853 · Cited by 86
Hassanin, A.-A. I. M., El‐Samie, F. E. A., & El‐Banby, G. M. (2019) · Multimedia Tools and Applications · doi:10.1007/s11042-019-08097-9 · Cited by 86
Li, W., & Tsai, D. (2009) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2009.2034844 · Cited by 84
Recognition of semiconductor defect patterns using spatial filtering and spectral clustering
Wang, C.-H. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.02.014 · Cited by 83
Ambiguous Surface Defect Image Classification of AMOLED Displays in Smartphones
Park, Y., & Kweon, I. S. (2016) · IEEE Transactions on Industrial Informatics · doi:10.1109/tii.2016.2522191 · Cited by 82
Nakata, K., Orihara, R., Mizuoka, Y., & Takagi, K. (2017) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2017.2753251 · Cited by 82
A tiered-color illumination approach for machine inspection of solder joints
Capson, D. W., & Eng, S.-K. (1988) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/34.3902 · Cited by 78
Machine Vision-Based Positioning and Inspection Using Expectation–Maximization Technique
Tsai, D., & Hsieh, Y.-C. (2017) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2017.2717284 · Cited by 77
A Weakly Supervised Surface Defect Detection Based on Convolutional Neural Network
Liang, X., Lv, S., Deng, Y., & Li, X. (2020) · IEEE Access · doi:10.1109/access.2020.2977821 · Cited by 77
Liu, Y., Lin, S.-H., Hsueh, Y.-L., & Lee, M.-J. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.12.015 · Cited by 76
Automated thermal fuse inspection using machine vision and artificial neural networks
Sun, T.-H., Tien, F.-C., Tien, F.-C., & Kuo, R. J. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0902-y · Cited by 74
Yuk, E. H., Park, S. H., Park, C.-S., & Baek, J. (2018) · Applied Sciences · doi:10.3390/app8060932 · Cited by 74
Enhanced Stacked Denoising Autoencoder-Based Feature Learning for Recognition of Wafer Map Defects
Yu, J. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2940334 · Cited by 74
Teena, M., Manickavasagan, A., Mothershaw, A. S., Hadi, S. E., & Jayas, D. S. (2013) · Food and Bioprocess Technology · doi:10.1007/s11947-013-1079-7 · Cited by 73
Real-time defect detection on highly reflective curved surfaces
Rosati, G., Boschetti, G., Biondi, A., & Rossi, A. (2008) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2008.03.010 · Cited by 73
Li, D., Liang, L., & Zhang, W.-J. (2014) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-014-5871-y · Cited by 73
SMT Solder Joint Inspection via a Novel Cascaded Convolutional Neural Network
Cai, N., Cen, G., Wu, J., Li, F., Wang, H., & Chen, X. (2018) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2018.2789453 · Cited by 73
Automatic optical inspection system for IC molding surface
Chen, S., & Perng, D. (2014) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-014-0924-5 · Cited by 71
A fast regularity measure for surface defect detection
Tsai, D.-M., Chen, M.-C., Li, W.-C., & Chiu, W.-Y. (2012) · Machine Vision and Applications · doi:10.1007/s00138-011-0403-3 · Cited by 70
Defect cluster recognition system for fabricated semiconductor wafers
Ooi, M. P., Sok, H. K., Kuang, Y. C., Demidenko, S. N., & Chan, C. W. K. (2012) · Engineering Applications of Artificial Intelligence · doi:10.1016/j.engappai.2012.03.016 · Cited by 70
Chen, L.-C., & Kuo, C. C. (2007) · Measurement Science and Technology · doi:10.1088/0957-0233/19/1/015507 · Cited by 70
Flat-panel electronic displays: a triumph of physics, chemistry and engineering
Hilsum, C. (2010) · Philosophical Transactions of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rsta.2009.0247 · Cited by 68
Statistical Process Control with Intelligence Based on the Deep Learning Model
Zan, T., Liu, Z., Su, Z., Wang, M., Gao, X., & Chen, D. (2019) · Applied Sciences · doi:10.3390/app10010308 · Cited by 68
Evolutionary Fuzzy ARTMAP Neural Networks for Classification of Semiconductor Defects
Tan, S. C., Watada, J., Ibrahim, Z., & Khalid, M. (2014) · IEEE Transactions on Neural Networks and Learning Systems · doi:10.1109/tnnls.2014.2329097 · Cited by 67
Using Wafer Map Features to Better Predict Die-Level Failures in Final Test
Kang, S., Cho, S., An, D., & Rim, J. (2015) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2015.2443864 · Cited by 65
Lin, H.-D. (2007) · Image and Vision Computing · doi:10.1016/j.imavis.2007.02.002 · Cited by 64
An anisotropic diffusion-based defect detection for low-contrast glass substrates
Chao, S.-M., & Tsai, D. (2007) · Image and Vision Computing · doi:10.1016/j.imavis.2007.03.003 · Cited by 64
Fast Industrial Inspection of Optical Thin Film Using Optical Coherence Tomography
Shirazi, M. F., Park, K., Wijesinghe, R. E., Jeong, H., Han, S., Kim, P., Jeon, M., & Kim, J. (2016) · Sensors · doi:10.3390/s16101598 · Cited by 61
Defect inspection for TFT-LCD images based on the low-rank matrix reconstruction
Cen, Y., Zhao, R., Cen, L., Cui, L., Miao, Z., & Wei, Z. (2014) · Neurocomputing · doi:10.1016/j.neucom.2014.09.007 · Cited by 60
Feature extraction and classification of gear faults using principal component analysis
Li, W., Shi, T., Liao, G., & Yang, S. (2003) · Journal of Quality in Maintenance Engineering · doi:10.1108/13552510310482389 · Cited by 59
An Effective Defect Inspection Method for LCD Using Active Contour Model
Gan, Y., & Zhao, Q. (2013) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2013.2258242 · Cited by 59
Feature-Extraction-Based Inspection Algorithm for IC Solder Joints
Wu, F., & Zhang, X. (2011) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2011.2118208 · Cited by 58
Vision-Based Defect Detection for Mobile Phone Cover Glass using Deep Neural Networks
Yuan, Z., Zhang, Z., Su, H., Zhang, L., Shen, F., & Zhang, F. (2018) · International Journal of Precision Engineering and Manufacturing · doi:10.1007/s12541-018-0096-x · Cited by 57
Wang, C.-C., Jiang, B. C., Lin, J.-Y., & Chu, C.-C. (2013) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2013.2261566 · Cited by 56
Independent component analysis-based defect detection in patterned liquid crystal display surfaces
Lu, C.-J., & Tsai, D. (2007) · Image and Vision Computing · doi:10.1016/j.imavis.2007.10.007 · Cited by 56
Fault detection and classification in automated assembly machines using machine vision
Chauhan, V., & Surgenor, B. W. (2016) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-016-9581-5 · Cited by 56
Unsupervised-Learning-Based Feature-Level Fusion Method for Mura Defect Recognition
Mei, S., Yang, H. S., & Yin, Z. (2017) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2017.2648856 · Cited by 56
Palma, F. D., Nicolao, G. D., Miraglia, G., Pasquinetti, E., & Piccinini, F. (2005) · Pattern Recognition Letters · doi:10.1016/j.patrec.2005.03.007 · Cited by 55
Kim, M., Lee, M., An, M., & Lee, H.-C. (2019) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-019-01502-y · Cited by 54
Automatic Visual Defect Detection Using Texture Prior and Low-Rank Representation
Huangpeng, Q., Zhang, H., Zeng, X., & Huang, W. (2018) · IEEE Access · doi:10.1109/access.2018.2852663 · Cited by 53
Automatic inspection system of surface defects on optical IR-CUT filter based on machine vision
Liu, Y., & Yu, F. (2013) · Optics and Lasers in Engineering · doi:10.1016/j.optlaseng.2013.11.013 · Cited by 53
Defect detection in periodically patterned surfaces using independent component analysis
Tsai, D., & Lai, S.-C. (2008) · Pattern Recognition · doi:10.1016/j.patcog.2008.02.011 · Cited by 51
Automatic inspection system of LED chip using two-stages back-propagation neural network
Kuo, C. J., Hsu, C.-T. M., Liu, Z., & Wu, H. (2013) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-012-0725-7 · Cited by 51
A framework for inspection of dies attachment on PCB utilizing machine learning techniques
Vafeiadis, T., Dimitriou, N., Ioannidis, D., Wotherspoon, T., Tinker, G., & Tzovaras, D. K. (2018) · Journal of Management Analytics · doi:10.1080/23270012.2018.1434425 · Cited by 51
A Review of Data Mining with Big Data towards Its Applications in the Electronics Industry
Lv, S., Kim, H., Zheng, B., & Jin, H. S. (2018) · Applied Sciences · doi:10.3390/app8040582 · Cited by 51
SMT defect classification by feature extraction region optimization and machine learning
Song, J.-D., Kim, Y.-G., & Park, T.-H. (2018) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-018-3022-6 · Cited by 50
Tsai, D., & Hung, C. (2005) · International Journal of Production Research · doi:10.1080/00207540500140732 · Cited by 49
Separation of composite defect patterns on wafer bin map using support vector clustering
Wang, C.-H. (2008) · Expert Systems with Applications · doi:10.1016/j.eswa.2008.01.057 · Cited by 49
Automatic identification of spatial defect patterns for semiconductor manufacturing
Wang, C., Wang, S.-R., & Lee, W.-D. (2006) · International Journal of Production Research · doi:10.1080/02772240600610822 · Cited by 48
Chao, L.-C., & Tong, L. (2009) · Expert Systems with Applications · doi:10.1016/j.eswa.2009.01.003 · Cited by 48
Similarity Searching for Defective Wafer Bin Maps in Semiconductor Manufacturing
Liao, C.-S., Hsieh, T.-J., Huang, Y.-S., & Chien, C. (2013) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2013.2277603 · Cited by 48
Blob analyzation-based template matching algorithm for LED chip localization
Zhong, F., He, S., & Li, B. (2015) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-015-7638-5 · Cited by 47
An eigenvalue-based similarity measure and its application in defect detection
Tsai, D., & Yang, R.-H. (2005) · Image and Vision Computing · doi:10.1016/j.imavis.2005.07.014 · Cited by 47
Bearing performance degradation assessment based on the rough support vector data description
Zhu, X., Zhang, Y., & Zhu, Y. (2012) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2012.08.008 · Cited by 46
Lu, C.-J., & Tsai, D. (2004) · International Journal of Production Research · doi:10.1080/00207540410001716480 · Cited by 46
Chen, M.-S., Liu, B., & Yu, P. S. (2002) · Lecture notes in computer science · doi:10.1007/3-540-47887-6 · Cited by 46
Selver, M. A., Akay, O., Alim, F., Bardakçı, S., & Ölmez, M. (2010) · Robotics and Computer-Integrated Manufacturing · doi:10.1016/j.rcim.2010.07.004 · Cited by 45
A Method for Automatic Surface Inspection Using a Model-Based 3D Descriptor
Madrigal, C. A., Branch, J. W., Restrepo-Martínez, A., & Mery, D. (2017) · Sensors · doi:10.3390/s17102262 · Cited by 45
A novel defect detection and identification method in optical inspection
Xie, L., Huang, R., Gu, N., & Cao, Z. (2013) · Neural Computing and Applications · doi:10.1007/s00521-013-1442-7 · Cited by 44
Jiang, J., Cheng, J. T., & Tao, D. (2012) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2012.2205149 · Cited by 44
A robust vision inspection system for detecting surface defects of film capacitors
Yang, Y., Zha, Z.-J., Gao, M., & He, Z. (2015) · Signal Processing · doi:10.1016/j.sigpro.2015.10.028 · Cited by 44
Wafer Map Defect Pattern Recognition Using Rotation-Invariant Features
Wang, R., & Chen, N. (2019) · IEEE Transactions on Semiconductor Manufacturing · doi:10.1109/tsm.2019.2944181 · Cited by 44
Fast and Precise Positioning in PCBs Using Deep Neural Network Regression
Tsai, D., & Chou, Y.-H. (2019) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2957866 · Cited by 44
A golden-template self-generating method for patterned wafer inspection
Xie, P., & Guan, S.-U. (2000) · Machine Vision and Applications · doi:10.1007/s001380050133 · Cited by 43
Rao, A. R. (1996) · Image and Vision Computing · doi:10.1016/0262-8856(95)01035-1 · Cited by 43
Clustered defect detection of high quality chips using self-supervised multilayer perceptron
Huang, C. (2006) · Expert Systems with Applications · doi:10.1016/j.eswa.2006.07.011 · Cited by 43
Yang, H. S., Song, K., Mei, S., & Yin, Z. (2018) · IEEE Transactions on Automation Science and Engineering · doi:10.1109/tase.2018.2823709 · Cited by 42
Automatic defect recognition of TFT array process using gray level co-occurrence matrix
Yang, S., Lin, C., Lin, S., & Chiang, H.-T. (2014) · Optik · doi:10.1016/j.ijleo.2013.11.070 · Cited by 41
Multi-step ART1 algorithm for recognition of defect patterns on semiconductor wafers
Choi, G., Kim, S.-H., Ha, C., & Bae, S. J. (2011) · International Journal of Production Research · doi:10.1080/00207543.2011.574502 · Cited by 40
Sindagi, V. A., & Srivastava, S. (2016) · International Journal of Computer Vision · doi:10.1007/s11263-016-0953-y · Cited by 39
Automated SMD LED inspection using machine vision
Perng, D., Liu, H.-W., & Chang, C. (2011) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-011-3338-y · Cited by 38
Deep Sparse Autoencoder for Feature Extraction and Diagnosis of Locomotive Adhesion Status
Zhang, C., Cheng, X., Liu, J., He, J., & Liu, G. (2018) · Journal of Control Science and Engineering · doi:10.1155/2018/8676387 · Cited by 38
Zakaria, S. M. M. S., Amir, A., Yaakob, N., & Nazemi, S. (2020) · IOP Conference Series Materials Science and Engineering · doi:10.1088/1757-899x/767/1/012064 · Cited by 38
Automatic detection of Mura defect in TFT-LCD based on regression diagnostics
Fan, S. S., & Chuang, Y.-C. (2010) · Pattern Recognition Letters · doi:10.1016/j.patrec.2010.07.013 · Cited by 37
Liu, Y., Liu, Y.-C., & Chen, Y.-Z. (2010) · Expert Systems with Applications · doi:10.1016/j.eswa.2010.11.046 · Cited by 37
Unsupervised detection of surface defects: A two-step approach
Choi, J., & Kim, C. (2012) · 2012 19th IEEE International Conference on Image Processing · doi:10.1109/icip.2012.6467040 · Cited by 36
A Neural-Network Approach for Defect Recognition in TFT-LCD Photolithography Process
Chen, L., Su, C., & Chen, M.-H. (2009) · IEEE Transactions on Electronics Packaging Manufacturing · doi:10.1109/tepm.2008.926117 · Cited by 36
Automatic defect inspection system of colour filters using Taguchi-based neural network
Kuo, C. J., Hsu, C.-T. M., Fang, C.-H., Chao, S.-M., & Lin, Y.-D. (2012) · International Journal of Production Research · doi:10.1080/00207543.2012.695877 · Cited by 36
Chen, Y., Fan, C.-Y., & Chang, K.-H. (2016) · Computers & Industrial Engineering · doi:10.1016/j.cie.2016.05.009 · Cited by 36
Li, T.-Y., Tsai, J., Chang, R., Ho, L.-W., & Yang, C.-F. (2012) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2012.2207658 · Cited by 35
Lin, H.-D. (2007) · Expert Systems with Applications · doi:10.1016/j.eswa.2007.09.014 · Cited by 34
Getting More From the Semiconductor Test: Data Mining With Defect-Cluster Extraction
Ooi, M. P., Joo, E. K. J., Kuang, Y. C., Demidenko, S. N., Kleeman, L., & Chan, C. W. K. (2011) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2011.2122430 · Cited by 34
A digital image-based measurement system for a LCD backlight module
Lin, C., Wu, W.-Z., Lay, Y., & Chang, M. (2001) · Optics & Laser Technology · doi:10.1016/s0030-3992(01)00069-x · Cited by 34
Directional textures auto-inspection using discrete cosine transform
Perng, D., & Chen, S. (2011) · International Journal of Production Research · doi:10.1080/00207543.2010.495087 · Cited by 33
An image system for fast positioning and accuracy inspection of ball grid array boards
Lin, C., & Lue, L.-W. (2001) · Microelectronics Reliability · doi:10.1016/s0026-2714(00)00213-4 · Cited by 33
Cited by
Smart manufacturing powered by recent technological advancements: A review
Sahoo, S., & Lo, C.-Y. (2022) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2022.06.008 · Cited by 292
PCB defect detection algorithm based on CDI-YOLO
Xiao, G., Hou, S., & Zhou, H. (2024) · Scientific Reports · doi:10.1038/s41598-024-57491-3 · Cited by 113
Smart Machine Vision System to Improve Decision-Making on the Assembly Line
Silva, C. A. D. S., & Paladini, E. P. (2025) · Machines · doi:10.3390/machines13020098 · Cited by 13
Metadata
- Authors
- Ebayyeh, A. A. R. M. A., & Mousavi, A.
- Venue
- IEEE Access
- Published
- 2020
- Volume
- 8
- Pages
- 183192-183271
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3092466439
- Cited by
- 310
- References
- 257
- FWCI
- 13.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.