The DOI matches its Crossref record; 108 of the 108 references it cites were found in a registry or an index.
Classifications and Applications of Inkjet Printing Technology: A Review
Open accessAbstract
Inkjet printing technology uses the low-cost direct deposition manufacturing technique for printing and is applicable in various fields including optics, ceramics, three-dimensional printing in biomedicine, and conductive circuitry. This study reviews the classifications and applications of inkjet printing technologies, with a focus on recent publications. The different design approaches, applications, and research progress of several inkjet printing techniques are reviewed. Among them, the piezoelectric inkjet printing technology is the main focus owing to its reliability and handling of a diverse range of inks. A piezo-driven inkjet printhead is activated by applying a voltage waveform to a piezoelectric membrane. The waveform ensures the formation of the designed droplet and a stable jet. A survey of various driving-voltage waveforms is conducted, which can serve as a reference to the research community that uses piezo-driven inkjet printheads. The challenges of printing quality, stability, and speed and their solutions as published in recent studies are reviewed. Technologies for producing high-viscosity inkjets are explored, and the applications of inkjet printing technology in textile, displays, and wearable devices are discussed.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
DROP IMPACT DYNAMICS: Splashing, Spreading, Receding, Bouncing…
Yarin, A. L. (2006) · Annual Review of Fluid Mechanics · doi:10.1146/annurev.fluid.38.050304.092144 · Cited by 2,677
Skin electronics from scalable fabrication of an intrinsically stretchable transistor array
Wang, S., Xu, J., Wang, W., Wang, G.-J. N., Rastak, R., Molina-Lopez, F., Chung, J. W., Niu, S., Feig, V. R., Lopez, J., et al. (2018) · Nature · doi:10.1038/nature25494 · Cited by 2,198
Inkjet Printing for Materials and Devices
Calvert, P. (2001) · Chemistry of Materials · doi:10.1021/cm0101632 · Cited by 1,822
Direct Ink Writing of 3D Functional Materials
Lewis, J. A. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200600434 · Cited by 1,740
Drop Impact on a Solid Surface
Josserand, C., & Thoroddsen, S. T. (2016) · Annual Review of Fluid Mechanics · doi:10.1146/annurev-fluid-122414-034401 · Cited by 1,579
Mini-LED, Micro-LED and OLED displays: present status and future perspectives
Huang, Y., Hsiang, E.-L., Deng, M.-Y., & Wu, S.-T. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0341-9 · Cited by 1,393
Phenomena of liquid drop impact on solid and liquid surfaces
Rein, M. L. (1993) · Fluid Dynamics Research · doi:10.1016/0169-5983(93)90106-k · Cited by 1,186
Progress and Trends in Ink-jet Printing Technology
Le, H. P. (1998) · Journal of Imaging Science and Technology · doi:10.2352/j.imagingsci.technol.1998.42.1.art00007 · Cited by 720
Micro-light-emitting diodes with quantum dots in display technology
Liu, Z., Lin, C.-H., Hyun, B.-R., Sher, C.-W., Lv, Z., Luo, B., Jiang, F., Wu, T., Ho, C.-H., Kuo, H.-C., et al. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0268-1 · Cited by 663
Mechanisms, Capabilities, and Applications of High‐Resolution Electrohydrodynamic Jet Printing
Onses, M. S., Sutanto, E., Ferreira, P. M., Alleyne, A. G., & Rogers, J. A. (2015) · Small · doi:10.1002/smll.201500593 · Cited by 603
Ink-jet printed nanoparticle microelectromechanical systems
Fuller, S. B., Wilhelm, E. J., & Jacobson, J. M. (2002) · Journal of Microelectromechanical Systems · doi:10.1109/84.982863 · Cited by 594
The dynamics of the piezo inkjet printhead operation☆
Wijshoff, H. (2010) · Physics Reports · doi:10.1016/j.physrep.2010.03.003 · Cited by 593
Inkjet printing of conductive materials: a review
Cummins, G., & Desmulliez, M. P. Y. (2012) · Circuit World · doi:10.1108/03056121211280413 · Cited by 504
Multiple jets in electrospinning: experiment and modeling
Theron, S. A., Yarin, A. L., Zussman, E., & Kroll, E. (2005) · Polymer · doi:10.1016/j.polymer.2005.01.054 · Cited by 485
Keriquel, V., Oliveira, H., Rémy, M., Ziane, S., Delmond, S., Rousseau, B., Rey, S., Catros, S., Amédée, J., Guillemot, F., et al. (2017) · Scientific Reports · doi:10.1038/s41598-017-01914-x · Cited by 447
Kim, B. H., Onses, M. S., Lim, J. B., Nam, S., Oh, N., Kim, H., Yu, K. J., Lee, J. W., Kim, J.-H., Kang, S.-K., et al. (2015) · Nano Letters · doi:10.1021/nl503779e · Cited by 444
Carey, T., Cacovich, S., Divitini, G., Ren, J., Mansouri, A., Kim, J. M., Wang, C., Ducati, C., Sordan, R., & Torrisi, F. (2017) · Nature Communications · doi:10.1038/s41467-017-01210-2 · Cited by 433
An experimental study of drop-on-demand drop formation
Dong, H., Carr, W. W., & Morris, J. F. (2006) · Physics of Fluids · doi:10.1063/1.2217929 · Cited by 395
Droplet impact on superhydrophobic surfaces: A review of recent developments
Khojasteh, D., Kazerooni, M., Salarian, S., & Kamali, R. (2016) · Journal of Industrial and Engineering Chemistry · doi:10.1016/j.jiec.2016.07.027 · Cited by 377
Clogging of microfluidic systems
Dressaire, E., & Sauret, A. (2017) · Soft Matter · doi:10.1039/c6sm01879c · Cited by 370
Perovskite Quantum Dots and Their Application in Light‐Emitting Diodes
Wang, H., Bao, Z., Tsai, H., Tang, A., & Liu, R. (2018) · Small · doi:10.1002/smll.201702433 · Cited by 355
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Vuorinen, T., Niittynen, J., Kankkunen, T., Kraft, T. M., & Mäntysalo, M. (2016) · Scientific Reports · doi:10.1038/srep35289 · Cited by 335
Inkjet printing for pharmaceutics – A review of research and manufacturing
Daly, R., Harrington, T. S., Martin, G. D., & Hutchings, I. M. (2015) · International Journal of Pharmaceutics · doi:10.1016/j.ijpharm.2015.03.017 · Cited by 317
Wang, Y.-F., Sekine, T., Takeda, Y., Yokosawa, K., Matsui, H., Kumaki, D., Shiba, T., Nishikawa, T., & Tokito, S. (2020) · Scientific Reports · doi:10.1038/s41598-020-59432-2 · Cited by 316
Recent Progress in Inkjet‐Printed Thin‐Film Transistors
Chung, S., Cho, K., & Lee, T. (2019) · Advanced Science · doi:10.1002/advs.201801445 · Cited by 312
Tavakoli, M., Malakooti, M. H., Paisana, H., Ohm, Y., Green Marques, D., Alhais Lopes, P., Piedade, A. P., de Almeida, A. T., & Majidi, C. (2018) · Advanced Materials · doi:10.1002/adma.201801852 · Cited by 310
An, B. W., Kim, K., Lee, H., Kim, S., Shim, Y., Lee, D., Song, J. Y., & Park, J. (2015) · Advanced Materials · doi:10.1002/adma.201502092 · Cited by 306
Self-citation3D-printed microelectronics for integrated circuitry and passive wireless sensors
Wu, S.-Y., Yang, C., Hsu, W., & Lin, L. (2015) · Microsystems & Nanoengineering · doi:10.1038/micronano.2015.13 · Cited by 285
Three-dimensional monolithic integration in flexible printed organic transistors
Kwon, J., Takeda, Y., Shiwaku, R., Tokito, S., Cho, K., & Jung, S. (2018) · Nature Communications · doi:10.1038/s41467-018-07904-5 · Cited by 285
Electrohydrodynamic printing of silver nanowires for flexible and stretchable electronics
Cui, Z., Han, Y., Huang, Q., Dong, J., & Zhu, Y. (2018) · Nanoscale · doi:10.1039/c7nr09570h · Cited by 277
A review of non-contact micro- and nano-printing technologies
Ru, C., Luo, J., Xie, S., & Sun, Y. (2014) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/24/5/053001 · Cited by 248
Mini Review on Flexible and Wearable Electronics for Monitoring Human Health Information
Gu, Y., Zhang, T., Chen, H., Wang, F., Pu, Y., Gao, C., & Li, S. (2019) · Nanoscale Research Letters · doi:10.1186/s11671-019-3084-x · Cited by 247
A Review of Flexible OLEDs Toward Highly Durable Unusual Displays
Lee, S.-M., Kwon, J. H., Kwon, S., & Choi, K. C. (2017) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2017.2647964 · Cited by 245
Printed Electronics as Prepared by Inkjet Printing
Beedasy, V., & Smith, P. J. (2020) · Materials · doi:10.3390/ma13030704 · Cited by 233
Interfacial Jetting Phenomena Induced by Focused Surface Vibrations
Tan, M. K., Friend, J. R., & Yeo, L. Y. (2009) · Physical Review Letters · doi:10.1103/physrevlett.103.024501 · Cited by 225
Nozzleless droplet formation with focused acoustic beams
Elrod, S. A., Hadimioglu, B., Khuri-Yakub, B. T., Rawson, E. G., Richley, E., Quate, C. F., Mansour, N. N., & Lundgren, T. S. (1989) · Journal of Applied Physics · doi:10.1063/1.342663 · Cited by 220
A review on inkjet printing of CNT composites for smart applications
Kholghi Eshkalak, S., Chinnappan, A., Jayathilaka, W. A. D. M., Khatibzadeh, M., Kowsari, E., & Ramakrishna, S. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.09.003 · Cited by 207
Karim, N., Afroj, S., Tan, S., Novoselov, K. S., & Yeates, S. G. (2019) · Scientific Reports · doi:10.1038/s41598-019-44420-y · Cited by 202
Foresti, D., Kroll, K. T., Amissah, R., Sillani, F., Homan, K. A., Poulikakos, D., & Lewis, J. A. (2018) · Science Advances · doi:10.1126/sciadv.aat1659 · Cited by 195
Review of digital printing technologies for electronic materials
Kwon, K., Rahman, M. K., Phung, T. H., Hoath, S., Jeong, S., & Kim, J. S. (2020) · Flexible and Printed Electronics · doi:10.1088/2058-8585/abc8ca · Cited by 187
3D Printing of Textiles: Potential Roadmap to Printing with Fibers
Chatterjee, K., & Ghosh, T. K. (2020) · Advanced Materials · doi:10.1002/adma.201902086 · Cited by 180
Inkjet-Printing Technology for Supercapacitor Application: Current State and Perspectives
Sajedi-Moghaddam, A., Rahmanian, E., & Naseri, N. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c07689 · Cited by 180
Modak, C. D., Kumar, A., Tripathy, A., & Sen, P. (2020) · Nature Communications · doi:10.1038/s41467-020-18103-6 · Cited by 177
Beyond OLED: Efficient Quantum Dot Light‐Emitting Diodes for Display and Lighting Application
Sun, Y., Jiang, Y., Sun, X. W., Zhang, S., & Chen, S. (2019) · The Chemical Record · doi:10.1002/tcr.201800191 · Cited by 163
3D Printed Tissue Models: Present and Future
Jang, J., Yi, H.-G., & Cho, D.-W. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00129 · Cited by 161
Current Trends on Medical and Pharmaceutical Applications of Inkjet Printing Technology
Scoutaris, N., Ross, S. A., & Douroumis, D. (2016) · Pharmaceutical Research · doi:10.1007/s11095-016-1931-3 · Cited by 157
Ultrasensitive 3D Aerosol-Jet-Printed Perovskite X-ray Photodetector
Glushkova, A., Andričević, P., Smajda, R., Náfrádi, B., Kollár, M., Djokić, V., Arakcheeva, A. V., Forró, L., Pugin, R., & Horváth, E. (2021) · ACS Nano · doi:10.1021/acsnano.0c07993 · Cited by 153
Heo, J. S., Hossain, M. F., & Kim, I.-S. (2020) · Sensors · doi:10.3390/s20143927 · Cited by 150
Luo, J., Zhang, L., Wu, T., Song, H., & Tang, C. (2021) · Extreme Mechanics Letters · doi:10.1016/j.eml.2021.101279 · Cited by 144
Wei, C., & Dong, J. (2013) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/23/2/025017 · Cited by 137
Dispensing pico to nanolitre of a natural hydrogel by laser-assisted bioprinting
Gruene, M., Unger, C., Koch, L., Deiwick, A., & Chichkov, B. N. (2011) · BioMedical Engineering OnLine · doi:10.1186/1475-925x-10-19 · Cited by 132
Recent Advancement of Emerging Nano Copper-Based Printable Flexible Hybrid Electronics
Li, Z., Chang, S., Khuje, S., & Ren, S. (2021) · ACS Nano · doi:10.1021/acsnano.1c02209 · Cited by 128
The roles of wettability and surface tension in droplet formation during inkjet printing
He, B. W., Yang, S., Qin, Z., Wen, B., & Zhang, C. (2017) · Scientific Reports · doi:10.1038/s41598-017-12189-7 · Cited by 127
Additive‐Free Aqueous MXene Inks for Thermal Inkjet Printing on Textiles
Uzun, S., Schelling, M., Hantanasirisakul, K., Mathis, T. S., Askeland, R. A., Dion, G., & Gogotsi, Y. G. (2020) · Small · doi:10.1002/smll.202006376 · Cited by 127
Wearable temperature sensor for human body temperature detection
Kuzubaşoğlu, B. A., Sayar, E., Cochrane, C., Končar, V., & Bahadır, S. K. (2021) · Journal of Materials Science Materials in Electronics · doi:10.1007/s10854-020-05217-2 · Cited by 125
Inkjet Printing of Silver Nanowires for Stretchable Heaters
Huang, Q., Al‐Milaji, K. N., & Zhao, H. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00830 · Cited by 123
Kuzubaşoğlu, B. A., Sayar, E., & Bahadır, S. K. (2021) · IEEE Sensors Journal · doi:10.1109/jsen.2021.3070073 · Cited by 120
Ink-Jet Printing of Micro-Electro-Mechanical Systems (MEMS)
Lau, G., & Shrestha, M. (2017) · Micromachines · doi:10.3390/mi8060194 · Cited by 106
Inkjet printing of mammalian cells – Theory and applications
Kumar, P., Ebbens, S. J., & Zhao, X. (2021) · Bioprinting · doi:10.1016/j.bprint.2021.e00157 · Cited by 104
Impulsively actuated jets from thin liquid films for high-resolution printing applications
Brown, M. S., Brasz, C. F., Ventikos, Y., et al. (2012) · Journal of Fluid Mechanics · doi:10.1017/jfm.2012.337 · Cited by 98
Fully‐Printed Piezoelectric Devices for Flexible Electronics Applications
Aliqué, M., Simao, C. D., Murillo, G., & Moya, A. (2021) · Advanced Materials Technologies · doi:10.1002/admt.202001020 · Cited by 98
Zhang, Z., Xiong, R., Mei, R., Huang, Y. H., & Chrisey, D. B. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b00919 · Cited by 96
Kim, J. Y., Pfeiffer, K., Voigt, A., Gruetzner, G., & Brügger, J. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm15576a · Cited by 90
Shi, S., Bai, W., Xuan, T., Zhou, T., Dong, G., & Xie, R. (2020) · Small Methods · doi:10.1002/smtd.202000889 · Cited by 88
Mikkonen, R., Puistola, P., Jönkkäri, I., & Mäntysalo, M. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b19632 · Cited by 86
Multiscale 3D Bioprinting by Nozzle‐Free Acoustic Droplet Ejection
Jentsch, S., Nasehi, R., Kuckelkorn, C., Gundert, B., Aveic, S., & Fischer, H. (2021) · Small Methods · doi:10.1002/smtd.202000971 · Cited by 86
Electrohydrodynamic Jet Printing Driven by a Triboelectric Nanogenerator
Wu, C., Tetik, H., Cheng, J., Ding, W., Guo, H., Tao, X., Zhou, N., Zi, Y., Wu, Z., Wu, H., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201901102 · Cited by 85
Bietsch, A., Hegner, M., Lang, H. P., & Gerber, C. (2004) · Langmuir · doi:10.1021/la049621m · Cited by 83
Inkjet printing for the fabrication of flexible/stretchable wearable electronic devices and sensors
Al-Halhouli, A. T., Qitouqa, H., Alashqar, A., & Abu-Khalaf, J. (2018) · Sensor Review · doi:10.1108/sr-07-2017-0126 · Cited by 81
Damage-Free Low Temperature Pulsed Laser Printing of Gold Nanoinks On Polymers
Chung, J., Ko, S. H., Grigoropoulos, C. P., Bieri, N. R., Dockendorf, C., & Dimos Poulikakos, A. (2005) · ASME Journal of Heat and Mass Transfer · doi:10.1115/1.1924627 · Cited by 80
Continuous tuneable droplet ejection via pulsed surface acoustic wave jetting
Castro, J. O., Ramesan, S., Rezk, A. R., & Yeo, L. Y. (2018) · Soft Matter · doi:10.1039/c7sm02534c · Cited by 80
Inkjet Printing of Viscous Monodisperse Microdroplets by Laser-Induced Flow Focusing
Delrot, P., Modestino, M. A., Gallaire, F., Psaltis, D., & Moser, C. (2016) · Physical Review Applied · doi:10.1103/physrevapplied.6.024003 · Cited by 79
Chen, M., Xie, L., Wei, C., Yi, Y., Chen, X., Yang, J., Zhuang, J., Li, F., Su, W., & Cui, Z. (2021) · Nano Research · doi:10.1007/s12274-021-3352-9 · Cited by 75
Delekta, S. S., Adolfsson, K. H., Erdal, N. B., Hakkarainen, M., Östling, M., & Li, J. (2019) · Nanoscale · doi:10.1039/c9nr01427f · Cited by 71
Fabrication of microvascular constructs using high resolution electrohydrodynamic inkjet printing
Zheng, F., Derby, B., & Wong, J. K. F. (2020) · Biofabrication · doi:10.1088/1758-5090/abd158 · Cited by 68
Khan, A., Rahman, K., Ali, S., Khan, S., Wang, B., & Bermak, A. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00188-4 · Cited by 67
Controlled deposition of nanoparticle clusters by electrohydrodynamic atomization
Jayasinghe, S. N., Edirisinghe, M. J., & Wang, D. Z. (2004) · Nanotechnology · doi:10.1088/0957-4484/15/11/025 · Cited by 63
Salary, R. R., Lombardi, J. P., Weerawarne, D. L., Rao, P., & Poliks, M. D. (2021) · Journal of Micro and Nano-Manufacturing · doi:10.1115/1.4049958 · Cited by 54
Inkjet-Printed Wireless Chemiresistive Sensors—A Review
Hartwig, M., Zichner, R., & Joseph, Y. (2018) · Chemosensors · doi:10.3390/chemosensors6040066 · Cited by 49
Zou, W., Yu, H., Zhou, P., Zhong, Y., Wang, Y., & Liu, L. (2020) · Applied Surface Science · doi:10.1016/j.apsusc.2020.148800 · Cited by 47
Design and synthesis of low temperature printed metal oxide memristors
Carlos, E., Deuermeier, J., Branquinho, R., Gaspar, C., Martins, R., Kiazadeh, A., & Fortunato, E. (2021) · Journal of Materials Chemistry C · doi:10.1039/d0tc05368f · Cited by 47
Abu-Khalaf, J., Saraireh, R., Eisa, S. M., & Al-Halhouli, A. T. (2018) · Sensors · doi:10.3390/s18103476 · Cited by 45
Kim, M., Yun, H., & Kim, G. (2017) · Scientific Reports · doi:10.1038/s41598-017-03461-x · Cited by 44
SAW-driven droplet jetting technology in microfluidic: A review
Lei, Y., & Hu, H. (2020) · Biomicrofluidics · doi:10.1063/5.0014768 · Cited by 43
A review on acoustic droplet ejection technology and system
Guo, Q., Su, X. M., Zhang, X., Shao, M., Yu, H., & Li, D. (2021) · Soft Matter · doi:10.1039/d0sm02193h · Cited by 42
Makrygianni, M., Milionis, A., Kryou, C., Trantakis, I. A., Dimos Poulikakos, A., & Zergioti, I. (2018) · Advanced Materials Interfaces · doi:10.1002/admi.201800440 · Cited by 37
A knowledge transfer framework to support rapid process modeling in aerosol jet printing
Zhang, H., Choi, J. P., Moon, S. K., & Ngo, T. H. (2021) · Advanced Engineering Informatics · doi:10.1016/j.aei.2021.101264 · Cited by 35
Al-Halhouli, A. T., Al‐Ghussain, L., Khallouf, O., Rabadi, A. D., Alawadi, J., Liu, H., Oweidat, K. A., Chen, F., & Zheng, D. (2021) · Sensors · doi:10.3390/s21020468 · Cited by 33
Piezoelectric P(VDF-TrFE) film inkjet printed on silicon for high-frequency ultrasound applications
Banquart, A., Callé, S., Levassort, F., Fritsch, L., Ossant, F., Siewe, S. T., Chevalliot, S., Capri, A., & Grégoire, J. (2021) · Journal of Applied Physics · doi:10.1063/5.0048444 · Cited by 33
Vertical jetting induced by shear horizontal leaky surface acoustic wave on 36° Y-X LiTaO3
Fu, C., Quan, A., Luo, J., Pang, H., Guo, Y., Wu, Q., Ng, W. P., Zu, X., & Fu, Y. (2017) · Applied Physics Letters · doi:10.1063/1.4982073 · Cited by 31
SU-8 inkjet patterning for microfabrication
Bernasconi, R., Angeli, M. A. C., Mantica, F., Carniani, D., & Magagnin, L. (2019) · Polymer · doi:10.1016/j.polymer.2019.121933 · Cited by 30
Al-Halhouli, A. T., Al‐Ghussain, L., Bouri, S. E., Liu, H., & Zheng, D. (2020) · Journal of Clinical Monitoring and Computing · doi:10.1007/s10877-020-00481-3 · Cited by 28
Aerosol-jet-printed, conformable microfluidic force sensors
Jing, Q., Pace, A., Ives, L., Husmann, A., Ćatić, N., Khanduja, V., Cama, J., & Kar‐Narayan, S. (2021) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2021.100386 · Cited by 28
Advances in Microdroplet Generation Methods
Yu-Yao, W. E. I., Sun, Z., Ren, H., & Li, L. (2019) · Chinese Journal of Analytical Chemistry · doi:10.1016/s1872-2040(19)61162-x · Cited by 25
Biroun, M. H., Rahmati, M. T., Jangi, M., Chen, B., & Fu, Y. (2020) · International Journal of Multiphase Flow · doi:10.1016/j.ijmultiphaseflow.2020.103545 · Cited by 25
Sato, S., Enokido, T., Ashikawa, K., Matsubara, M., Kanie, K., & Ohnishi, N. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.112823 · Cited by 24
Fully printed, stretchable and wearable bioimpedance sensor on textiles for tomography
Jose, M., Lemmens, M., Bormans, S., Thoelen, R., & Deferme, W. (2021) · Flexible and Printed Electronics · doi:10.1088/2058-8585/abe51b · Cited by 22
Snyder, B., Yang, M., Singhal, S., Abed, O., & Sreenivasan, S. V. (2018) · Precision Engineering · doi:10.1016/j.precisioneng.2018.11.009 · Cited by 19
Inkjet Printing of Highly Sensitive, Transparent, Flexible Linear Piezoresistive Strain Sensors
Kang, T.-K. (2021) · Coatings · doi:10.3390/coatings11010051 · Cited by 18
Inkjet Printing of Silica Aerogel for Fabrication of 2-D Patterned Thermal Insulation Layers
Koo, J., Kim, J. W., Kim, M., Yoon, S., & Shim, J. H. (2020) · International Journal of Precision Engineering and Manufacturing-Green Technology · doi:10.1007/s40684-020-00189-4 · Cited by 17
Ma, L., & Shao, Y. (2020) · Journal of Central South University · doi:10.1007/s11771-020-4395-x · Cited by 15
Inkjet printing of multi-stripes based deflection monitoring sensor on flexible substrate
Khan, S., Ali, S., Khan, A., Ahmed, M., Wang, B., & Bermak, A. (2021) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2021.112638 · Cited by 15
Inkjet Printing of a Benzocyclobutene-Based Polymer as a Low-k Material for Electronic Applications
Iervolino, F., Suriano, R., Scolari, M., Gelmi, I., Castoldi, L., & Levi, M. (2021) · ACS Omega · doi:10.1021/acsomega.1c01488 · Cited by 14
Modelling of Power-Law Fluid Flow Inside a Piezoelectric Inkjet Printhead
Peng, J., Huang, J., & Wang, J. (2021) · Sensors · doi:10.3390/s21072441 · Cited by 12
Equipment for printing of high viscosity liquids and molten metals
Houben, R. (2012) · doi:10.3990/1.9789036534048 · Cited by 11
Benchmarking of Inkjet Printing Methods for Combined Throughput and Performance
Bevione, M., & Chiolerio, A. (2020) · Advanced Engineering Materials · doi:10.1002/adem.202000679 · Cited by 9
Tofan, T., Stonkus, R., & Jasevičius, R. (2021) · Coatings · doi:10.3390/coatings11030354 · Cited by 3
Yang, J.-H., Tsou, K.-L., Fu, Y., Cheng, Y.-T., & Song, Y. (2019) · IEEE International Conference on Micro Electro Mechanical Systems (MEMS) · doi:10.1109/memsys.2019.8870649 · Cited by 2
Cited by
Shah, S. S., Niaz, F., Ehsan, M. A., Das, H. T., Younas, M., Khan, A. S., Rahman, H. U., Nayem, S. M. A., Oyama, M., & Aziz, M. A. (2024) · Journal of Energy Storage · doi:10.1016/j.est.2023.110152 · Cited by 317
Inkjet Printing and 3D Printing Strategies for Biosensing, Analytical, and Diagnostic Applications
Zub, K., Hoeppener, S., & Schubert, U. S. (2022) · Advanced Materials · doi:10.1002/adma.202105015 · Cited by 287
Advances in femtosecond laser synthesis and micromachining of halide perovskites
Du, S., Zhang, F., & Ma, L. (2024) · Light: Advanced Manufacturing · doi:10.37188/lam.2024.035 · Cited by 9
Metadata
- Authors
- Shah, M. A., Lee, D.-G., Lee, B.-Y., & Hur, S.
- Venue
- IEEE Access
- Published
- 2021
- Volume
- 9
- Pages
- 140079-140102
- ISSN
- 2169-3536 (ISSN-L)
- OpenAlex
- W3206452593
- Cited by
- 295
- References
- 108
- FWCI
- 9.79
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.