Effect of flexure hinge type on a 3D printed fully compliant prosthetic finger
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
Soft robotics, as a new dimension in robotics, is an rapidly growing research area. Fully compliant mechanisms and structures can be built using soft materials. Having a fully compliant system -a monolithic body- will reduce the manufacturing and assembly costs and show a whole-body bending performance similar to its natural counter-parts. Current prosthetics, particularly fingers and hands, require significant manufacturing and assembly operations. Using additive manufacturing (aka 3D printing), low cost and high performance prosthetic devices can be established. In this study, we report on a fully compliant finger which is 3D printed with a modified low-cost 3D printer based on the Fused Deposition Modelling (FDM) technique. Prior to the finger fabrication, the bending behavior of some well-known flexure hinges were modelled and experimentally evaluated to find the most suitable design for a fully compliant prosthetic finger. Experimental and numerical results from the finite element analysis for the hinges and the complaint finger are in good correlation, encouraging us to establish a single piece prosthetic hand in the near future.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tongues, Tentacles and Trunks: the Biomechanics of Movement in Muscular-Hydrostats
KIER, W. M., & SMITH, K. K. (1985) · Zoological Journal of the Linnean Society · doi:10.1111/j.1096-3642.1985.tb01178.x · Cited by 910
Meshworm: A Peristaltic Soft Robot With Antagonistic Nickel Titanium Coil Actuators
Seok, S., Onal, C. D., Cho, K.-J., Wood, R. J., Rus, D., & Kim, S. (2013) · IEEE/ASME Transactions on Mechatronics · doi:10.1109/tmech.2012.2204070 · Cited by 665
Cited by
Momeni, F., M.Mehdi Hassani.N, S., Liu, X., & Ni, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.02.068 · Cited by 1,165
González-Henríquez, C. M., Sarabia-Vallejos, M. A., & Rodriguez-Hernandez, J. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.03.001 · Cited by 562
4D Printing Technology: A Review
Choi, J., Kwon, O.-C., Jo, W., Lee, H. J., & Moon, M.-W. (2015) · 3D Printing and Additive Manufacturing · doi:10.1089/3dp.2015.0039 · Cited by 365
Metadata
- Authors
- Mutlu, R., Alici, G., in het Panhuis, M., & Spinks, G.
- Venue
- 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM)
- Publisher
- IEEE
- Published
- 2015-07
- Pages
- 790-795
- OpenAlex
- W1603852272
- Cited by
- 56
- References
- 2
- FWCI
- 9.56
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Effect of flexure hinge type on a 3D printed fully compliant prosthetic finger. https://app.cochat.ai/papers/10.1109/aim.2015.7222634
- The paper
- Mutlu, R., Alici, G., in het Panhuis, M., & Spinks, G. (2015). Effect of flexure hinge type on a 3D printed fully compliant prosthetic finger. 2015 IEEE International Conference on Advanced Intelligent Mechatronics (AIM). https://doi.org/10.1109/aim.2015.7222634
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.