A 6.6kW SiC bidirectional on-board charger
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
This paper proposes a bidirectional architecture to implement an on-board charger (OBC) including an interleaved totem bridgeless PFC and Mode-Switched (MS) DC-DC converter. In the charging mode with the relay on, the MS DC-DC converter behave as a high efficiency Pulse Frequency Modulation (PFM) LLC converter since the charging mode is the most majority application scenario for the OBC. The PFC output voltage is regulated between 360 V to 400 V feeding into the DC-DC converter, so that 900 V SiC MOSFETs can be used both in the AC-DC and DC-DC stage to realize high frequency and high efficiency owing to the fast switching speed and high voltage rating with low on-resistance. The synchronous rectification (SR) is applied on the secondary side MOSFETs of the LLC converter to further improve the efficiency taking advantage of the bidirectional full-bridge topology. In the discharging mode with the relay off, the MS DC-DC stage is a two-stage converter. The reverse operation of the LLC converter operates as a DC-DC transformer (DCX) at the resonant point, and its output voltage is regulated to the bus voltage by a boost converter because the reverse gain of the LLC converter is lower than 1. A 6.6 kW SiC MS bidirectional OBC of DC-DC stage is built. In the charging mode, the peak efficiency is 96.37% at 6.6 kW with 380 V input voltage and 336 V output voltage. In the discharging mode, the peak efficiency is 96.87% at 3.3 kW with 346 V input voltage and 380 V output voltage.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Li, B., Lee, F. C., Li, Q., & Liu, Z. (2017) · 2017 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2017.7931228 · Cited by 105 · cited 1×
“In [12], the CLLC-type topology is utilized to realize bidirectional operation and the converter always operates at its optimized point as a variable DC-link voltage operation is adopted to settle the wide battery voltage range.”
Method
Cited by
Bidirectional Onboard Chargers for Electric Vehicles: State-of-the-Art and Future Trends
Wouters, H., & Martinez, W. (2024) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2023.3319996 · Cited by 280
A SiC Bidirectional LLC On-Board Charger
Li, H., Wang, S., Zhang, Z., Tang, J., Ren, X., & Chen, Q. (2019) · 2019 IEEE Applied Power Electronics Conference and Exposition (APEC) · doi:10.1109/apec.2019.8722324 · Cited by 32
Self-citationA review on unidirectional converters for on-board chargers in electric vehicle
Vijayakumar, S., & Sudhakar, N. (2022) · Frontiers in Energy Research · doi:10.3389/fenrg.2022.1011681 · Cited by 26
“The SiC MOSFET is promising for EV chargers that require extremely high efficiency and high density (Li, 2018).”
Background
Metadata
- Authors
- Li, H., Bai, L., Zhang, Z., Wang, S., Tang, J., Ren, X., & Li, J.
- Venue
- 2018 IEEE Applied Power Electronics Conference and Exposition (APEC)
- Publisher
- IEEE
- Published
- 2018-03
- Pages
- 1171-1178
- OpenAlex
- W2798980196
- Cited by
- 40
- References
- 1
- FWCI
- 8.84
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A 6.6kW SiC bidirectional on-board charger. https://app.cochat.ai/papers/10.1109/apec.2018.8341164
- The paper
- Li, H., Bai, L., Zhang, Z., Wang, S., Tang, J., Ren, X., & Li, J. (2018). A 6.6kW SiC bidirectional on-board charger. 2018 IEEE Applied Power Electronics Conference and Exposition (APEC). https://doi.org/10.1109/apec.2018.8341164
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.