An energy-efficient matrix multiplication accelerator by distributed in-memory computing on binary RRAM crossbar
The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
Emerging resistive random-access memory (RRAM) can provide non-volatile memory storage but also intrinsic logic for matrix-vector multiplication, which is ideal for low-power and high-throughput data analytics accelerator performed in memory. However, the existing RRAM-based computing device is mainly assumed on a multi-level analog computing, whose result is sensitive to process non-uniformity as well as additional AD- conversion and I/O overhead. This paper explores the data analytics accelerator on binary RRAM-crossbar. Accordingly, one distributed in-memory computing architecture is proposed with design of according component and control protocol. Both memory array and logic accelerator can be implemented by RRAM-crossbar purely in binary, where logic-memory pairs can be distributed with protocol of control bus. Based on numerical results for fingerprint matching that is mapped on the proposed RRAM-crossbar, the proposed architecture has shown 2.86x faster speed, 154x better energy efficiency, and 100x smaller area when compared to the same design by CMOS-based ASIC.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“ADC can consume up to 70–90% of the on-chip area of the crossbar-based computation unit, including memristive crossbar and peripheral circuits, and up to 80-88% of energy55,154,155. In summary, ADCs are commonly the largest and most power-hungry circuit block in a memristive neural network55,156.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [155]
In the citing paper
“ADC can consume up to 70–90% of the on-chip area of the crossbar-based computation unit, including memristive crossbar and peripheral circuits, and up to 80-88% of energy55,154,155.”
From Hardware implementation of memristor-based artificial neural networks (2024) · cites this paper as [155]
Citations
Cites
Robust Face Recognition via Sparse Representation
Wright, J., Yang, A. Y., Ganesh, A., Sastry, S. S., & Ma, Y. (2009) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2008.79 · Cited by 9,388
Resistive Random Access Memory (ReRAM) Based on Metal Oxides
Akinaga, H., & Shima, H. (2010) · Proceedings of the IEEE · doi:10.1109/jproc.2010.2070830 · Cited by 1,037
Kim, K.-H., Gaba, S., Wheeler, D., Cruz-Albrecht, J. M., Hussain, T., Srinivasa, N., & Lu, W. (2012) · Nano Letters · doi:10.1021/nl203687n · Cited by 924 · cited 2×
“Emerging resistive random-access memory (RRAM) [4][5] has shown great potential to be the solution for data-intensive applications.”
BackgroundMethodLee, H. Y., Chen, P. S., Wu, T. Y., Chen, Y. S., Wang, C. C., Tzeng, P. J., Lin, C. H., Chen, F., Lien, C. H., & Tsai, M.-J. (2008) · 2008 IEEE International Electron Devices Meeting · doi:10.1109/iedm.2008.4796677 · Cited by 641
RENO: a high-efficient reconfigurable neuromorphic computing accelerator design
Liu, X., Mao, M., Liu, B., Li, H., Chen, Y., Li, B., Wang, Y., Jiang, H., Barnell, M., Wu, Q., et al. (2015) · Proceedings of the 52nd Annual Design Automation Conference · doi:10.1145/2744769.2744900 · Cited by 142
Self-citationA spiking neuromorphic design with resistive crossbar
Liu, C., Yan, B., Yang, C., Song, L., Li, Z., Liu, B., Chen, Y., Li, H. H., Wu, Q., & Jiang, H. (2015) · ACM/IEEE Design Automation Conference (DAC) · doi:10.1145/2744769.2744783 · Cited by 130
Two-terminal resistive switches (memristors) for memory and logic applications
Lu, W., Kim, K.-H., Chang, T., & Gaba, S. (2011) · 16th Asia and South Pacific Design Automation Conference (ASP-DAC 2011) · doi:10.1109/aspdac.2011.5722187 · Cited by 97
MTJ-based nonvolatile logic-in-memory circuit, future prospects and issues
Matsunaga, S., Hayakawa, J., Ikeda, S., Miura, K., Endoh, T., Ohno, H., & Hanyu, T. (2009) · Design, Automation, and Test in Europe · doi:10.1109/date.2009.5090704 · Cited by 95
Two-terminal resistive switches (memristors) for memory and logic applications
Lu, W. D., Kim, S., Chang, T., & Gaba, S. (2011) · doi:10.5555/1950815.1950868 · Cited by 78
A digital neuromorphic VLSI architecture with memristor crossbar synaptic array for machine learning
Kim, Y., Zhang, Y., & Li, P. (2012) · 2012 IEEE International SOC Conference · doi:10.1109/socc.2012.6398336 · Cited by 69
Kumar, V., Sharma, R., Uzunlar, E., Zheng, L., Bashirullah, R., Kohl, P. A., Bakir, M. S., & Naeemi, A. (2014) · IEEE Transactions on Components Packaging and Manufacturing Technology · doi:10.1109/tcpmt.2014.2326798 · Cited by 32
Park, S., Qazi, M., Peh, L.-S., & Chandrakasan, A. P. (2013) · Design, Automation, and Test in Europe · doi:10.7873/date.2013.332 · Cited by 23
20mW, 125 Msps, 10 bit Pipelined ADC in 65nm Standard Digital CMOS Process
Singh, P. N., Kumar, A., Debnath, C., & Malik, R. (2007) · Custom Integrated Circuits Conference · doi:10.1109/cicc.2007.4405710 · Cited by 21
Park, S., Qazi, M., Peh, L.-S., et al. (2013) · DSpace@MIT (Massachusetts Institute of Technology) · doi:10.5555/2485288.2485677 · Cited by 17
Cited by
Hardware implementation of memristor-based artificial neural networks
Aguirre, F., Sebastian, A., Le Gallo, M., Song, W., Wang, T., Yang, J. J., Lu, W., Chang, M.-F., Ielmini, D., Yang, Y., et al. (2024) · Nature Communications · doi:10.1038/s41467-024-45670-9 · Cited by 564
“Moreover, ADC can consume up to 70 – 90% of the on-chip area of the crossbar-based computation unit, including memristive crossbar and peripheral circuits, and up to 80-88% of energy 55,154,155 .”
In-memory Learning with Analog Resistive Switching Memory: A Review and Perspective
Xi, Y., Gao, B., Tang, J., Chen, A., Chang, M.-F., Hu, X. S., Spiegel, J. V. D., Qian, H., & Wu, H. (2021) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3004543 · Cited by 196
A Survey of ReRAM-Based Architectures for Processing-In-Memory and Neural Networks
Mittal, S. (2018) · Machine Learning and Knowledge Extraction · doi:10.3390/make1010005 · Cited by 185
Chakraborty, I., Ali, M., Ankit, A., Jain, S., Roy, S., Sridharan, S., Agrawal, A., Raghunathan, A., & Roy, K. (2020) · Proceedings of the IEEE · doi:10.1109/jproc.2020.3003007 · Cited by 140
“These peripheral circuits within MVM units, particularly the ADCs, have been shown to account for a large fraction (up to ∼80%) of the total energy consumption of the MVM unit [35].”
BackgroundInfluentialNeuromorphic Spiking Neural Networks and Their Memristor-CMOS Hardware Implementations
Camuñas-Mesa, L. A., Linares-Barranco, B., & Serrano‐Gotarredona, T. (2019) · Materials · doi:10.3390/ma12172745 · Cited by 147
Metadata
- Authors
- Ni, L., Wang, Y., Yu, H., Yang, W., Weng, C., & Zhao, J.
- Affiliations
- Nanyang Technological University (SG)
- Huawei Technologies (China) (CN)
- Venue
- 2016 21st Asia and South Pacific Design Automation Conference (ASP-DAC)
- Publisher
- IEEE
- Published
- 2016-01
- Pages
- 280-285
- OpenAlex
- W2295683497
- Cited by
- 52
- References
- 13
- Citations by year
- 2026: 3 · 2025: 1 · 2024: 3 · 2023: 3 · 2022: 2 · 2021: 3 · 2020: 5 · 2019: 7 · 2018: 8 · 2017: 8 · 2016: 8
- FWCI
- 14.54
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Asia and South Pacific Design Automation Conference (ASP-DAC) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced Memory and Neural Computing
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Low-power high-performance VLSI design
- Physical Sciences › Computer Science › Hardware and Architecture › Parallel Computing and Optimization Techniques
- Keywords
- resistive random access memory, in-memory computing, energy-efficient hardware, fingerprint matching, non-volatile logic
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.