The DOI matches its Crossref record.
A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications
Abstract
Inductive Power Transfer (IPT) has proved its capability as a safe, convenient and efficient solution for electric vehicle (EV) charging systems by providing sufficient power levels with tolerance to lateral displacement. The magnetic design of the receiver/secondary and transmitter/primary pads is the most critical part of an IPT system design. This paper presents the performance of a Bipolar Pad (BPP) receiver in a lumped IPT system for EV charging systems and compares it against the performance of a recently proposed receiver design, Double-D Quadrature Pad (DDQP). A 3D finite element modeling tool, which has shown good agreement between measured and simulated results in the past, is used to simulate all the models presented in this paper. The prototype models are also built and tested to verify the simulated results. Although it has been shown that the polarized single sided flux pad design, Double-D Pad (DDP), has much better performance than the non-polarized single sided flux pad design, Circular Pad (CP), still the ability of a receiver pickup to interoperate with both types of transmitters is considered to be highly desirable. In this paper the performance of a BPP receiver is compared against the performance of a DDQP receiver when used with either a DDP transmitter or a CP transmitter. The results show that the BPP receiver approximately matches the output levels provided by a DDQP receiver while using less amount of copper. Finally, the possibility of improving the ability of both the BPP and DDQP receivers to interoperate with both DDP and CP transmitters by changing the receiver ferrite structure is investigated. The results however indicate that for both the BPP and the DDQP receiver designs, the traditional ferrite structure exhibits best material usage efficiency amongst the design possibilities considered in this paper.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Wireless Power Transfer for Electric Vehicle Applications
Li, S., & Mi, C. C. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2319453 · Cited by 2,185
Wireless Power Transfer—An Overview
Zhang, Z., Pang, H., Georgiadis, A., & Cecati, C. (2019) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2018.2835378 · Cited by 1,723
Modern Trends in Inductive Power Transfer for Transportation Applications
Covic, G. A., & Boys, J. T. (2013) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2013.2264473 · Cited by 1,263
Self-citationModern Advances in Wireless Power Transfer Systems for Roadway Powered Electric Vehicles
Mi, C. C., Buja, G., Choi, S. Y., & Rim, C. T. (2016) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2016.2574993 · Cited by 841
Advances in Wireless Power Transfer Systems for Roadway-Powered Electric Vehicles
Choi, S. Y., Gu, B. W., Jeong, S. Y., & Rim, C. T. (2015) · IEEE Journal of Emerging and Selected Topics in Power Electronics · doi:10.1109/jestpe.2014.2343674 · Cited by 682
Metadata
- Authors
- Zaheer, A., Kacprzak, D., & Covic, G. A.
- Venue
- 2012 IEEE Energy Conversion Congress and Exposition (ECCE)
- Publisher
- IEEE
- Published
- 2012-09
- Pages
- 283-290
- OpenAlex
- W2068852698
- Cited by
- 178
- References
- 0
- FWCI
- 11.87
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications. https://app.cochat.ai/papers/10.1109/ecce.2012.6342811
- The paper
- Zaheer, A., Kacprzak, D., & Covic, G. A. (2012). A bipolar receiver pad in a lumped IPT system for electric vehicle charging applications. 2012 IEEE Energy Conversion Congress and Exposition (ECCE). https://doi.org/10.1109/ecce.2012.6342811
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.