An Introduction to Wire-Bondless Discrete GaN Power Packages With Top-Side Cu Sinterconnects®
The DOI matches its Crossref record; 7 of the 7 references it cites were found in a registry or an index.
Abstract
Power electronic modules have undergone a remarkable transition in terms of power density, temperature, and performance due to the shift from Si to WBG (Wide bandgap) semiconductors. WBG semiconductors with their high switching speed, high breakdown voltage and higher operation temperature outperform their Si counterparts. However, the current power packaging technologies are not sufficient to benefit from the superior properties of these WBG devices. For Si power electronic packaging, the traditional 500 µm Al wire bonding as top-side interconnection can carry a maximum current of 10 A which can be increased by parallel connections. However, the need for a higher current carrying capacity with a lower feature size is desirable for WBG devices. As a result, the conventional wire-bonding technology hinders these devices from reaching their full potential due to parasitics, heat dissipation, and reliability issues. To address these challenges, several wire bondless interconnection technologies have been proposed and developed. Among these technologies, a new alternative technology has been recently introduced by our group in which wire bonds are being replaced by printed Cu paste interconnects known as ‘Cu sinterconnects®’, So far, sinterconnects® have been only integrated into large IGBT power module packages where their efficiency has been proven. In this study, sinterconnects have been further optimized to be integrated into GaN-based discrete device discrete packages with fine feature sizes. The packaged GaN devices with fine-sinterconnects® were further characterized and compared with the standard wire-bonded GaN packages.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Conventional wire bonding is often unsuitable for WBG devices, which switch rapidly [25-27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [25]
In the citing paper
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress-all of which degrade performance and lifetime [25-27,40].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [25]
In the citing paper
“Conventional wire bonding, originally developed for Si devices, is a bottleneck that limits the attainable switching speed and power density of WBG packages.”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [25]
In the citing paper
“Cu-based interconnections (Cu clips, Cu sintering, etc.) can cut loop inductance from 14 nH to 2.37 nH versus wire bonding, thereby lowering EMI and switching losses [25,27].”
From Thermal Management of Wide-Bandgap Power Semiconductors: Strategies and Challenges in SiC and GaN Power Devices (2025) · cites this paper as [25]
Citations
Cites
A Survey of Wide Bandgap Power Semiconductor Devices
Millán, J., Godignon, P., Perpiñà, X., Pérez-Tomás, A., & Rebollo, J. (2014) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2013.2268900 · Cited by 2,685 · cited 1×
“These WBG semiconductors offer higher power density, can operate at higher temperatures, and have a greater breakdown electric field [1].”
BackgroundA Novel High-Temperature Planar Package for SiC Multichip Phase-Leg Power Module
Ning, P., Lei, T. G., Wang, F., Lu, G.-Q., Ngo, K. D. T., & Rajashekara, K. (2010) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2010.2046498 · Cited by 103
SKiN: Double side sintering technology for new packages
Stockmeier, T., Beckedahl, P., Gobl, C., & Malzer, T. (2011) · 2011 IEEE 23rd International Symposium on Power Semiconductor Devices and ICs · doi:10.1109/ispsd.2011.5890856 · Cited by 94
Planar Interconnect Technology for Power Module System Integration
Weidner, K., Kaspar, M., & Seliger, N. (2012) · Cited by 88
Review of Topside Interconnections for Wide Bandgap Power Semiconductor Packaging
Wang, L., Wang, W., Hueting, R. J. E., Rietveld, G., & Ferreira, J. A. (2023) · IEEE Transactions on Power Electronics · doi:10.1109/tpel.2022.3200469 · Cited by 73 · cited 3×
“Sinter-based materials such as Ag or Cu micrp-particle sinter pastes and transient-liquid phase (TLPS) bonding have become popular due to their high reliability in power electronics compared to solders [2].”
BackgroundInfluentialRoshanghias, A., Malagò, P., Kaczynski, J., Polom, T. A., Bardong, J., Holzmann, D., Malik, M., Ortner, M., Hirschl, C., & Binder, A. (2021) · Energies · doi:10.3390/en14082176 · Cited by 15
Self-citationEvaluating Cu Printed Interconnects “Sinterconnects” versus Wire Bonds for Switching Converters
Hasan, M. N., Polom, T. A., Holzmann, D., Malagò, P., Binder, A., & Roshanghias, A. (2022) · Electronics · doi:10.3390/electronics11091373 · Cited by 6
Self-citation
Cited by
Reliability Challenges, Models, and Physics of Silicon Carbide and Gallium Nitride Power Devices
Avraham, T., Dhyani, M., & Bernstein, J. B. (2025) · Energies · doi:10.3390/en18051046 · Cited by 42
Han, G., Kim, J., Park, S., & Bae, W. (2025) · Electronics · doi:10.3390/electronics14214193 · Cited by 34
“The constraints arise from three factors: substantial parasitic inductance, restricted vertical heat removal, and reduced reliability under thermomechanical stress—all of which degrade performance and lifetime [25–27 , 40].”
Medinceanu, P.-C., Antonescu, A. M., & Enachescu, M. (2026) · Electronics · doi:10.3390/electronics15030510 · Cited by 11
Vicente, J., Rocha, A., Ramos, C., & Morais, V. A. (2026) · Transportation research procedia · doi:10.1016/j.trpro.2026.08.056
Metadata
- Authors
- Ain, K. N., Zhang, G. Q., Rodrigues, A., Hasan, M. N., Holzmann, D., Geens, K., Chatterjee, U., & Roshanghias, A.
- Affiliations
- Silicon Austria Labs (Austria) (AT)
- Technische Universiteit Delft,Department of Microelectronics,Delft,Netherlands
- IMEC (BE)
- ORCID
- Venue
- 2024 IEEE 10th Electronics System-Integration Technology Conference (ESTC)
- Publisher
- IEEE
- Published
- 2024-09-11
- Pages
- 1-5
- OpenAlex
- W4403442443
- Cited by
- 2
- References
- 7
- Citations by year
- 2025: 2
- FWCI
- 1.53
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- Electronic System-Integration Technology Conference (ESTC) (publishedVersion)
- Topics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Silicon Carbide Semiconductor Technologies
- Physical Sciences › Physics and Astronomy › Condensed Matter Physics › GaN-based semiconductor devices and materials
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Electronic Packaging and Soldering Technologies
- Keywords
- wide bandgap semiconductors, power modules, current-carrying capacity, parasitic effects, heat dissipation, reliability
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: An Introduction to Wire-Bondless Discrete GaN Power Packages With Top-Side Cu Sinterconnects®. https://app.cochat.ai/papers/10.1109/estc60143.2024.10712025
- The paper
- Ain, K. N., Zhang, G. Q., Rodrigues, A., Hasan, M. N., Holzmann, D., Geens, K., Chatterjee, U., & Roshanghias, A. (2024). An Introduction to Wire-Bondless Discrete GaN Power Packages With Top-Side Cu Sinterconnects®. 2024 IEEE 10th Electronics System-Integration Technology Conference (ESTC). https://doi.org/10.1109/estc60143.2024.10712025
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.