Lidar-histogram for fast road and obstacle detection
The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Abstract
Detection of traversable road regions, positive and negative obstacles, and water hazards is a fundamental task for autonomous driving vehicles, especially in off-road environment. This paper proposes an efficient method, called Lidar-histogram. It can be used to integrate the detection of traversable road regions, obstacles and water hazards into one single framework. The weak assumption of the Lidar-histogram is that a decent-sized area in front of the vehicle is flat. The Lidar-histogram is derived from an efficient organized map of Lidar point cloud, called Lidar-imagery, to index, describe and store Lidar data. The organized point-cloud map can be easily obtained by indexing the original unordered 3D point cloud to a Lidar-specific 2D coordinate system. In the Lidar-histogram representation, the 3D traversable road plane in front of vehicle can be projected as a straight line segment, and the positive and negative obstacles are projected above and below the line segment, respectively. In this way, the problem of detecting traversable road and obstacles is converted into a simple linear classification task in 2D space. Experiments have been conducted in different kinds of off-road and urban scenes, and we have obtained very promising results.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A new performance measure and evaluation benchmark for road detection algorithms
Fritsch, J., Kuhnl, T., & Geiger, A. (2013) · 16th International IEEE Conference on Intelligent Transportation Systems (ITSC 2013) · doi:10.1109/itsc.2013.6728473 · Cited by 690
Cited by
Progressive LiDAR adaptation for road detection
Chen, Z., Zhang, J., & Tao, D. (2019) · IEEE/CAA Journal of Automatica Sinica · doi:10.1109/jas.2019.1911459 · Cited by 205
A Novel Approach for Detecting Road Based on Two-Stream Fusion Fully Convolutional Network
Lv, X., Liu, Z., Xin, J., & Zheng, N. (2018) · 2018 IEEE Intelligent Vehicles Symposium (IV) · doi:10.1109/ivs.2018.8500551 · Cited by 21
“RELATED WORK Over the past few years, many methods have been proposed to perform road detection, which differ from each other mainly in the data they used, such as stereo data [6], [7], images from monocular camera [8]–[11] and LIDAR point clouds [12], [13].”
MethodA Fusion Model for Road Detection based on Deep Learning and Fully Connected CRF
Yang, F., Yang, J., Jin, Z., & Wang, H. (2018) · 2018 13th Annual Conference on System of Systems Engineering (SoSE) · doi:10.1109/sysose.2018.8428696 · Cited by 13
“[11] use a Lidar-histogram algorithm for road detection by analyzing the v-disparity map of the lidar-imagery they proposed.”
MethodSelf-citation
Metadata
- Authors
- Chen, L., Yang, J., & Kong, H.
- Venue
- 2017 IEEE International Conference on Robotics and Automation (ICRA)
- Publisher
- IEEE
- Published
- 2017-05
- Pages
- 1343-1348
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2737777104
- Cited by
- 112
- References
- 1
- FWCI
- 15.58
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Lidar-histogram for fast road and obstacle detection. https://app.cochat.ai/papers/10.1109/icra.2017.7989159
- The paper
- Chen, L., Yang, J., & Kong, H. (2017). Lidar-histogram for fast road and obstacle detection. 2017 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/icra.2017.7989159
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.