The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Dex-Net 3.0: Computing Robust Vacuum Suction Grasp Targets in Point Clouds Using a New Analytic Model and Deep Learning
Abstract
Vacuum-based end effectors are widely used in industry and are often preferred over parallel-jaw and multifinger grippers due to their ability to lift objects with a single point of contact. Suction grasp planners often target planar surfaces on point clouds near the estimated centroid of an object. In this paper, we propose a compliant suction contact model that computes the quality of the seal between the suction cup and local target surface and a measure of the ability of the suction grasp to resist an external gravity wrench. To characterize grasps, we estimate robustness to perturbations in end-effector and object pose, material properties, and external wrenches. We analyze grasps across 1,500 3D object models to generate Dex-Net 3.0, a dataset of 2.8 million point clouds, suction grasps, and grasp robustness labels. We use Dex-Net 3.0 to train a Grasp Quality Convolutional Neural Network (GQ-CNN) to classify robust suction targets in point clouds containing a single object. We evaluate the resulting system in 350 physical trials on an ABB YuMi fitted with a pneumatic suction gripper. When evaluated on novel objects that we categorize as Basic (prismatic or cylindrical), Typical (more complex geometry), and Adversarial (with few available suction-grasp points) Dex-Net 3.0 achieves success rates of 98%, 82%, and 58% respectively, improving to 81% in the latter case when the training set includes only adversarial objects. Code, datasets, and supplemental material can be found at http://berkeleyautomation.github.io/dex-net.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multiple View Geometry in Computer Vision
Hartley, R., & Zisserman, A. (2004) · doi:10.1017/cbo9780511811685 · Cited by 21,070
A Mathematical Introduction to Robotic Manipulation
Murray, R. M., Li, Z., & Sastry, S. S. (2017) · CRC Press eBooks · doi:10.1201/9781315136370 · Cited by 6,694
Multiple view geometry in computer vision
Opower, H. (2002) · Optics and Lasers in Engineering · doi:10.1016/s0143-8166(01)00145-2 · Cited by 3,007
Levine, S., Pastor, P., Krizhevsky, A., Ibarz, J., & Quillen, D. (2018) · The International Journal of Robotics Research · doi:10.1177/0278364917710318 · Cited by 1,971
Deep learning for detecting robotic grasps
Lenz, I., Lee, H., & Saxena, A. (2015) · The International Journal of Robotics Research · doi:10.1177/0278364914549607 · Cited by 1,634
Mahler, J., Liang, J., Niyaz, S., Laskey, M., Doan, R., Liu, X., Aparicio, J., & Goldberg, K. (2017) · Robotics: Science and Systems XIII · doi:10.15607/rss.2017.xiii.058 · Cited by 1,268
Self-citationSupersizing self-supervision: Learning to grasp from 50K tries and 700 robot hours
Pinto, L., & Gupta, A. (2016) · 2016 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2016.7487517 · Cited by 1,047
Robotic Grasping of Novel Objects using Vision
Saxena, A., Driemeyer, J., & Ng, A. Y. (2008) · The International Journal of Robotics Research · doi:10.1177/0278364907087172 · Cited by 923
Ferrari, C., & Canny, J. (2003) · Proceedings 1992 IEEE International Conference on Robotics and Automation · doi:10.1109/robot.1992.219918 · Cited by 893
Zeng, A., Song, S., Yu, K.-T., Donlon, E., Hogan, F. R., Bauza, M., Ma, D., Taylor, O., Liu, M., Romo, E., et al. (2018) · 2018 IEEE International Conference on Robotics and Automation (ICRA) · doi:10.1109/icra.2018.8461044 · Cited by 441
Cited by
How to train your robot with deep reinforcement learning: Lessons we have learned
Ibarz, J., Tan, J., Finn, C., Kalakrishnan, M., Pastor, P., & Levine, S. (2021) · The International Journal of Robotics Research · doi:10.1177/0278364920987859 · Cited by 570
Learning ambidextrous robot grasping policies
Mahler, J., Matl, M., Satish, V., Danielczuk, M., DeRose, B., McKinley, S., & Goldberg, K. (2019) · Science Robotics · doi:10.1126/scirobotics.aau4984 · Cited by 563
Self-citationSmart industrial robot control trends, challenges and opportunities within manufacturing
Arents, J., & Greitans, M. (2022) · Applied Sciences · doi:10.3390/app12020937 · Cited by 338
Learning Dexterous In-Hand Manipulation
OpenAI, Andrychowicz, M., Baker, B., Chociej, M., Jozefowicz, R., McGrew, B., Pachocki, J., Petron, A., Plappert, M., Powell, G., et al. (2018) · arXiv · doi:10.48550/arxiv.1808.00177 · Cited by 248
ContactGrasp: Functional Multi-finger Grasp Synthesis from Contact
Brahmbhatt, S., Handa, A., Hays, J., & Fox, D. (2019) · 2019 IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros40897.2019.8967960 · Cited by 125
Metadata
- Authors
- Mahler, J., Matl, M., Liu, X., Li, A., Gealy, D., & Goldberg, K.
- Venue
- 2018 IEEE International Conference on Robotics and Automation (ICRA)
- Publisher
- IEEE
- Published
- 2018-05
- Pages
- 5620-5627
- ISSN
- 1050-4729 (ISSN-L)
- OpenAlex
- W2964239605
- Cited by
- 323
- References
- 25
- FWCI
- 49.61
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Dex-Net 3.0: Computing Robust Vacuum Suction Grasp Targets in Point Clouds Using a New Analytic Model and Deep Learning. https://app.cochat.ai/papers/10.1109/icra.2018.8460887
- The paper
- Mahler, J., Matl, M., Liu, X., Li, A., Gealy, D., & Goldberg, K. (2018). Dex-Net 3.0: Computing Robust Vacuum Suction Grasp Targets in Point Clouds Using a New Analytic Model and Deep Learning. 2018 IEEE International Conference on Robotics and Automation (ICRA). https://doi.org/10.1109/icra.2018.8460887
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.