Reactive power compensation using on board stored energy in Electric Vehicles
The DOI matches its Crossref record; 2 of the 2 references it cites were found in a registry or an index.
Abstract
The features that can be performed by an electric vehicle depend essentially on the availability of energy and capacity of energy storage system of the electric vehicle,. Being the energy storage designed according to the requirements of the electric traction system, many additional features are somewhat limited. However, in certain situations, the energy stored on board can be used for conventional electrical networks, without affecting the performance of the electric vehicle. This article addresses the reactive power compensation as a feature inherent to the vehicle-to-grid connection. In this paper, the battery set on board of the electric vehicle supplies the traction system and a single phase inverter, which is connected to an ordinary AC grid. The inverter is controlled in order to supply current to the AC grid in order to compensate the AC grid power factor. The performed analysis is based on the PQ theory getting the current component that should be driven by the single phase inverter. This compensation, at this stage only compensates the fundamental component of the current and neglects the effects of the harmonics. This study aims to show that the electric vehicles can include the power factor compensation feature, without degrading their performance.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Emadi, A., Lee, Y. J., & Rajashekara, K. (2008) · IEEE Transactions on Industrial Electronics · doi:10.1109/tie.2008.922768 · Cited by 1,461 · cited 1×
“About these blocks it should be referred that: a nickel-metal hydride (Ni-MH) battery set was used; the single inverter uses IGBTs [5][6] and does not owns an output filter [7] (this issue is important to the harmonic content analysis, but was not considered in this work since the performed analysis is concerned with…”
MethodHaque, M. T. (2003) · 2002 IEEE 33rd Annual IEEE Power Electronics Specialists Conference. Proceedings (Cat. No.02CH37289) · doi:10.1109/psec.2002.1023074 · Cited by 91 · cited 1×
“The reference currents of the system are therefore obtained using the PQ theory [8].”
Method
Cited by
A review on the state-of-the-art technologies of electric vehicle, its impacts and prospects
Yong, J. Y., Ramachandaramurthy, V. K., Tan, K. M., & Mithulananthan, N. (2015) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.04.130 · Cited by 1,081
Tan, K. M., Ramachandaramurthy, V. K., & Yong, J. Y. (2016) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2015.09.012 · Cited by 872
Habib, S., Kamran, M., & Rashid, U. (2015) · Journal of Power Sources · doi:10.1016/j.jpowsour.2014.12.020 · Cited by 556
A Multifunctional Single-Phase EV On-Board Charger With a New V2V Charging Assistance Capability
Taghizadeh, S., Hossain, M. J., Poursafar, N., Lu, J., & Konstantinou, G. (2020) · IEEE Access · doi:10.1109/access.2020.3004931 · Cited by 76
Arfeen, Z. A., Khairuddin, A. B., Munir, A., Azam, M. K., Faisal, M., & Arif, M. S. B. (2020) · Energy Storage · doi:10.1002/est2.115 · Cited by 68
“The adequate sizing of the DC-link capacitor has the capability to facilitate reactive power compensation to the supply grid with a proper regulatory mechanism for the vehicle power electronics-based converter.(119,120) Bi-directional V2G offers quality services for power factor improvement which reduces the line loss…”
Background
Metadata
- Authors
- Silvestre, C., Sousa, D. M., & Roque, A.
- Venue
- IECON 2012 - 38th Annual Conference on IEEE Industrial Electronics Society
- Publisher
- IEEE
- Published
- 2012-10
- Pages
- 5227-5232
- ISSN
- 1553-572X (ISSN-L)
- OpenAlex
- W1994523240
- Cited by
- 17
- References
- 2
- FWCI
- 1.23
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.