A Novel Resistance Memory with High Scalability and Nanosecond Switching
The DOI matches its Crossref record.
Abstract
We report a novel nonvolatile dual-layered electrolytic resistance memory composed of a conductive Cu ion activated layer and a thin insulator for the first time. An ON/OFF mechanism of this new type memory is postulated as follows: Cu ions pierce through the insulator layer by applied electric field, the ions form a Cu conductive bridge in the insulator layer, and this bridge dissolves back to the ion activated layer when the field is reversed. The 4 kbit memory array with 1T-1R cell structure was fabricated based on 180 nm CMOS process. Set/reset pulses were 5 ns, 110 muA and 1 ns, 125 muA, respectively. Those conditions provide large set/reset resistance ratio of over 2 orders of magnitude and satisfactory retention. Essential characteristics for high capacity memories including superb scalability down to 20 nmphi, sufficient endurance up to 107cycles and preliminary data for 4-level memory are also presented. These characteristics promise the memory being the next generation high capacity nonvolatile memory even before the scaling limitation of flash memories is encountered.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Electrochemical metallization memories—fundamentals, applications, prospects
Valov, I., Waser, R., Jameson, J. R., & Kozicki, M. N. (2011) · Nanotechnology · doi:10.1088/0957-4484/22/25/254003 · Cited by 921
“In particular, Cu2S-based cells [41] have been successfully fabricated and operated down to 30 nm in diameter, and Gex Sey-based [15] and GdOx -based [13] cells down to just 20 nm.”
BackgroundMethodInfluentialResistive switching memories based on metal oxides: mechanisms, reliability and scaling
Ielmini, D. (2016) · Semiconductor Science and Technology · doi:10.1088/0268-1242/31/6/063002 · Cited by 905
Study of Multilevel Programming in Programmable Metallization Cell (PMC) Memory
Russo, U., Kamalanathan, D., Ielmini, D., Lacaita, A. L., & Kozicki, M. N. (2009) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2009.2016019 · Cited by 319
“ities still requires further characterization of state stability [18] and understanding of the programming operation.”
BackgroundReRAM: History, Status, and Future
Chen, Y. (2020) · IEEE Transactions on Electron Devices · doi:10.1109/ted.2019.2961505 · Cited by 294
Standards for the Characterization of Endurance in Resistive Switching Devices
Lanza, M., Waser, R., Ielmini, D., Yang, J. J., Goux, L., Suñe, J., Kenyon, A. J., Mehonic, A., Spiga, S., Rana, V., et al. (2021) · ACS Nano · doi:10.1021/acsnano.1c06980 · Cited by 262
Metadata
- Authors
- Aratani, K., Ohba, K., Mizuguchi, T., Yasuda, S., Shiimoto, T., Tsushima, T., Sone, T., Endo, K., Kouchiyama, A., Sasaki, S., Maesaka, A., Yamada, N., & Narisawa, H.
- Venue
- 2007 IEEE International Electron Devices Meeting
- Publisher
- IEEE
- Published
- 2007-12
- Pages
- 783-786
- ISSN
- 0163-1918 (ISSN-L)
- OpenAlex
- W2039053368
- Cited by
- 135
- References
- 0
- FWCI
- 5.03
- Type
- conference paper
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: A Novel Resistance Memory with High Scalability and Nanosecond Switching. https://app.cochat.ai/papers/10.1109/iedm.2007.4419064
- The paper
- Aratani, K., Ohba, K., Mizuguchi, T., Yasuda, S., Shiimoto, T., Tsushima, T., Sone, T., Endo, K., Kouchiyama, A., Sasaki, S., Maesaka, A., Yamada, N., & Narisawa, H. (2007). A Novel Resistance Memory with High Scalability and Nanosecond Switching. 2007 IEEE International Electron Devices Meeting. https://doi.org/10.1109/iedm.2007.4419064
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.