Defect detection of steel surface using entropy segmentation
The DOI matches its Crossref record; 14 of the 14 references it cites were found in a registry or an index.
Abstract
Today, because of high manufacturing speed in steel industry, there is a need of fast and accurate detection of steel defect for quality assurance of product. Unlike other papers on defect detection of steel surface based on entropy this paper presents a new pre-processing and processing algorithm. The method presented here overcomes the limitations of traditional segmentation method or adaptive segmentation method like Otsu's method. This paper presents a new defect detection algorithm based on entropy. As a pre-processing step illumination compensation of image has been introduced using inverse illumination to remove non-uniformity of light intensity in the image. In the second part Local entropy of image has been used to detect the region of defect. The paper also suggests the concept of dynamic updation which helps to find a good background i.e. ideal steel surface and provides an effective method to classify the defects in its initial stage into defective and non-defective image. Background subtraction method is then used to extract the defective portion of image from the entropy image by comparing the entropy of image with the entropy of background image. Histogram thresholding method has been introduced to separate the background and defective portion in the background subtracted image to get the segmented image. The method was successfully tested on three kinds of defect on steel surface i.e. water droplet, blister and scratch.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Citations
Cites
Digital Image Processing: An Algorithmic Introduction using Java
Burger, W., & Burge, M. J. (2008) · Texts in Computer Science · doi:10.1007/978-1-84628-968-2 · Cited by 1,540
Automated surface inspection for statistical textures
Tsai, D.-M., & Huang, T.-Y. (2003) · Image and Vision Computing · doi:10.1016/s0262-8856(03)00007-6 · Cited by 217
Steel Surface Defect Detection Using Texture Segmentation Based on Multifractal Dimension
Yazdchi, M., Yazdi, M., & Mahyari, A. G. (2009) · 2009 International Conference on Digital Image Processing · doi:10.1109/icdip.2009.68 · Cited by 65 · cited 4×
“[13] Y. Yunhui, S. Kechen, X. Zhitao, and F. Xuehui, The Strip Steel Surface Defects Classification Method Based on Weak Classifier Adaptive Enhancement, IEEE Third International Conference on Measuring Technology and Mechatronics Automation, 2011, pp. 958– 961.”
MethodInfluentialSurface defects inspection of cold rolled strips based on neural network
Kang, G.-W., & Liu, H.-B. (2005) · 2005 International Conference on Machine Learning and Cybernetics · doi:10.1109/icmlc.2005.1527830 · Cited by 62
(2000) · doi:10.1109/kes.2000.885769 · Cited by 45 · cited 1×
“The paper is organized as follows: In section 2, Steel Defects are introduced [4], [5].”
MethodYazdchi, M. R., Mahyari, A. G., & Nazeri, A. (2008) · 2008 International Conference on Computational Intelligence for Modelling Control & Automation · doi:10.1109/cimca.2008.130 · Cited by 39 · cited 6×
“In section 5, appropriate features are extracted using Entropy [6].”
MethodInfluentialDesign of online surface inspection system of hot rolled strips
Wu, G., Kwak, H., Jang, S., Xu, K., & Xu, J. (2008) · 2008 IEEE International Conference on Automation and Logistics · doi:10.1109/ical.2008.4636548 · Cited by 38 · cited 1×
“One important way to improve the quality of the end product is to inspect the output of each manufacturing process [1], [2].”
BackgroundDevelopment of Defect Classification Algorithm for POSCO Rolling Strip Surface Inspection System
Choi, K., Koo, K., & Lee, J. (2006) · 2006 SICE-ICASE International Joint Conference · doi:10.1109/sice.2006.314681 · Cited by 30
Weiwei, L., Yunhui, Y., Jun, L., Yao, Z., & Hongwei, S. (2008) · 2008 Second International Symposium on Intelligent Information Technology Application · doi:10.1109/iita.2008.67 · Cited by 23
Wu, G., Zhang, H., Sun, X., Xu, J., & Xu, K. (2007) · 2007 IEEE International Conference on Automation and Logistics · doi:10.1109/ical.2007.4338916 · Cited by 21
Research works printed but not linked: 2
- gonzalez, 2008, Digital Image Processing
- zhao, 2010, The cold rolling strip surface defect on-line inspection system based on machine vision, second pacific-asia conference on ieee circuits, Communications and System (PACCS), 402
Cited by
Automated Visual Defect Detection for Flat Steel Surface: A Survey
Luo, Q., Fang, X., Liu, L., Yang, C., & Sun, Y. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2019.2963555 · Cited by 559
“Furthermore, Nand et al. [22] calculated the local entropy of defective and defect-free images and extracted the defective region of image by using background subtraction method by comparing their entropy, and it is reported to perform better on detecting defective blocks of low-quality steel…”
MethodReview of surface defect detection of steel products based on machine vision
Tang, B., Chen, L., Sun, W., & Lin, Z. (2023) · IET Image Processing · doi:10.1049/ipr2.12647 · Cited by 271
A novel deep convolutional neural network algorithm for surface defect detection
Zhang, D., Hao, X., Liang, L., Liu, W., & Qin, C. (2022) · Journal of Computational Design and Engineering · doi:10.1093/jcde/qwac071 · Cited by 134
Cross Position Aggregation Network for Few-Shot Strip Steel Surface Defect Segmentation
Feng, H., Song, K., Cui, W., Zhang, Y., & Yan, Y. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3246519 · Cited by 115
“detection [13], and semantic segmentation [14].”
MethodZhong, H., Fu, D., Xiao, L., Zhao, F., Liu, J., Hu, Y., & Wu, B. (2024) · Advanced Engineering Informatics · doi:10.1016/j.aei.2024.102437 · Cited by 64
Chu, M., Liu, X., Gong, R., & Liu, L. (2018) · Chemometrics and Intelligent Laboratory Systems · doi:10.1016/j.chemolab.2018.03.014 · Cited by 47
A Non-Invasive Technique for Online Defect Detection on Steel Strip Surfaces
Bulnes, F. G., García, D. F., de la Calle, F. J., Usamentiaga, R., & Molleda, J. (2016) · Journal of Nondestructive Evaluation · doi:10.1007/s10921-016-0370-8 · Cited by 42
“The defects may also be detected considering certain properties of the histogram of an image area [16], or measuring its entropy [20], since the defective areas have more randomness than normal ones.”
BackgroundMetal Surface Defect Detection Method Based on Improved Cascade R-CNN
Wang, Y., Wang, X., Hao, R., Lu, B., & Huang, B. (2023) · Journal of Computing and Information Science in Engineering · doi:10.1115/1.4063860 · Cited by 47
Defect detection and recognition of bare PCB based on computer vision
Ma, J. (2017) · Chinese Control Conference (CCC) · doi:10.23919/chicc.2017.8029117 · Cited by 37
“The updation of the standard image is dynamic in nature and is done by eliminating the first candidate of good images and taking the average of the rest good images with the new coming image([6]).”
BackgroundAutomated detection of textured-surface defects using UNet-based semantic segmentation network
Enshaei, N., Ahmad, S., & Naderkhani, F. (2020) · IEEE Conference on Prognostics and Health Management · doi:10.1109/icphm49022.2020.9187023 · Cited by 41
“Classical surface defect detection methods can be categorized into three groups: (i) Statistical methods where detection of surface defects is performed by evaluation of pixel intensities and their associated statistical characteristics based of fractal dimensions [1], thresholding [2] and local binary pattern [3]; (i…”
MethodIndustrial Weak Scratches Inspection Based on Multifeature Fusion Network
Tao, X., Zhang, D., Hou, W. S., Ma, W., & Xu, D. (2020) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2020.3025642 · Cited by 30
“The segmentation method uses the similarity of local features to agglomerate into scratch regions, including threshold methods [11], neighborhood cluster [12], level sets [13], and features classifier [14].”
MethodA Lightweight Network for Defect Detection in Nickel-Plated Punched Steel Strip Images
Liang, Y., Li, J., Zhu, J., Du, R., Wu, X., & Bing-quan, C. (2023) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2023.3237844 · Cited by 32
“Traditional visual detection methods used for detecting steel strip defects can be classified into three categories: 1) statistical [27], [28], [29], [30]; 2) spectral-based [31], [32], [33]; and 3) model-based [34], [35], [36].”
MethodMa, Z., Li, Y., Huang, M., & Deng, N. (2023) · Journal of Manufacturing Systems · doi:10.1016/j.jmsy.2023.06.016 · Cited by 30
Qiu, Y., Tang, L., Li, B., Niu, S., & Niu, T. (2020) · IEEE Access · doi:10.1109/access.2020.3032108 · Cited by 22
“[1] compare the entropy difference between defective images and defect-free images to identify the defective regions of steel images.”
BackgroundSteel Surface Defects Detection Based on Deep Learning
Lin, W.-Y., Lin, C., Chen, G.-S., & Hsu, C.-Y. (2018) · Advances in intelligent systems and computing · doi:10.1007/978-3-319-94484-5_15 · Cited by 23
MPFANet: a multipath feature aggregation network for steel surface defect detection
Li, Z., Tai, Y., Huang, Z., Peng, T., & Zhang, Z. (2024) · Measurement Science and Technology · doi:10.1088/1361-6501/ad1daf · Cited by 19
“Nand et al [16] calculated the local entropy of defect and non-defect images and extracted the object regions according to background subtraction.”
MethodTSEDNet:Task-specific encoder–decoder network for surface defects of strip steel
Guo, Y., Wei, J., & Feng, X. (2024) · Measurement · doi:10.1016/j.measurement.2024.115438 · Cited by 22
Wei, C., Bao, Y., Zheng, C., & Ji, Z. (2025) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-025-02613-5 · Cited by 19
“Early approaches typically framed defect detection as a texture analysis problem, using strategies to extract texture information, such as the grayscale covariance matrix (Asha et al., 2011), entropy (Nand et al., 2014), and uniformity.”
Hao, X., Dong, T., & Zhang, D. (2021) · International Conference on Robotics and Automation Engineering (ICRAE) · doi:10.1109/icrae53653.2021.9657815 · Cited by 11
Defective Surface Detection based on Improved Faster R-CNN
Duan, H. M., Huang, J., Liu, W., & Shu, F. (2022) · IEEE International Conference on Industrial Technology (ICIT) · doi:10.1109/icit48603.2022.10002822 · Cited by 11
“[1] applied histogram thresholding and morphology on the most common defects of the steel surface.”
MethodLiang, X., Sun, J., Wang, X., Li, J., Zhang, L., & Guo, J. (2023) · Journal of the Optical Society of America A · doi:10.1364/josaa.483381 · Cited by 10
AN EFFICIENT QUALITY CONTROL SYSTEM BY MACHINE LEARNING FOR SURFACE DEFECTS
Alam, H., & Mohanan, S. (2021) · International Journal of Advances in Signal and Image Sciences · doi:10.29284/ijasis.7.2.2021.40-48 · Cited by 6
“AN entropy segmentation approach is discussed in [10] for steel surface defects detection.”
BackgroundDual-Modal Illumination System for Defect Detection of Aircraft Glass Canopies
Li, Z., Yao, Y., Wen, R., & Liu, Q. (2024) · Sensors · doi:10.3390/s24206717 · Cited by 8
“Traditional machine learning-based defect detection methods often rely on the comparison between defect images and defect-free templates [10], making them very sensitive to noise, background interference, and uneven lighting.”
BackgroundSurface defect detection of steel based on improved YOLOv5 algorithm
Jiang, Y. (2023) · Mathematical Biosciences & Engineering · doi:10.3934/mbe.2023879 · Cited by 7
“Nand et al. [5] proposed an entropy-based defect detection algorithm.”
BackgroundZhang, H., Miao, Q., Li, S., Wang, C., Chan, S., Hu, J., & Bai, C. (2024) · Multimedia Tools and Applications · doi:10.1007/s11042-024-19565-2 · Cited by 6
“In order to extract defect regions from pictures, Nand et al. [32] used a thresholding technique based on local entropy, whereas Yang et al. [33] differentiated between bright and dark defects on the steel surface using the mean and distribution of background pixels.”
Design and Implementation of PCB Detection and Classification System Based on Machine Vision
Shen, Z., Wang, S., Dou, J., & Tu, Z. (2018) · Lecture notes in electrical engineering · doi:10.1007/978-981-13-2375-1_32 · Cited by 5
Nguyen, A., & Yoshitaka, A. (2019) · IEEE International Conference on Signal and Image Processing (ICSIP) · doi:10.1109/siprocess.2019.8868828 · Cited by 4
“Defects of steel surfaces are recognized using entropy segmentation by Gagan Kishore Nand and Noopur in [12].”
MethodYingjie, 满. M., Xian, W., Dongyue, 孙. S., Ningdao, 邓. D., & Shixu, 吴. W. (2023) · Laser & Optoelectronics Progress · doi:10.3788/lop222981 · Cited by 3
Shang, X., Song, W., Chen, Z., & Zhang, C. (2022) · IET Image Processing · doi:10.1049/ipr2.12608 · Cited by 2
Mortin, K., Golovko, Y., Pogozheva, A., & Rybakov, A. (2023) · International Conference on Information, Control, and Communication Technologies (ICCT) · doi:10.1109/icct58878.2023.10347049 · Cited by 2
Zhong, H., Hu, Z., Liu, J., Wang, H., Hu, Y., & Shi, T. (2025) · Neurocomputing · doi:10.1016/j.neucom.2025.130601 · Cited by 3
Efficient vision defect detection model for drill pipe thread
Song, H., Sun, G., & Wang, J. (2025) · Journal of Electronic Imaging · doi:10.1117/1.jei.34.3.033010 · Cited by 2
“12,13 Nand et al. 14 introduced a steel defect detection method based on entropy statistics, which separated the defect from the background image by counting the distribution difference of local entropy in defect and defect-free images.”
Deep Learning-Based Quality Inspection System for Steel Sheet
Sambath, M., Reddy, C. S. B., Reddy, Y. K., Reddy, M. M. S., Kathiravan, M., & Ravi, S. (2022) · Algorithms for intelligent systems · doi:10.1007/978-981-19-6004-8_16 · Cited by 1
Analysis of defects on hot and cold roll coil using image processing methods
Khan, M. U., Alam, A., & Parveen, Z. (2017) · International Conference on Emerging Technologies · doi:10.1109/icet.2017.8281725 · Cited by 2
“Gagan Kishore Nand (2014) [6], has presented a new algorithm based on entropy.”
MethodClassificação das amostras do ensaio de Baumann através do processamento digital de imagens.
Queiroz, L. C. L. (2016) · Digital Library of Theses and Dissertations (Universidade de São Paulo) · doi:10.11606/d.3.2016.tde-14072016-110206 · Cited by 11
Buchelly, F. J., Gomez, M. R., Ceré, S., Ballarre, J., Ballarin, V. L., & Pastore, J. I. (2019) · World Congress on Medical Physics and Biomedical Engineering, September 7 - 12, 2009, Munich, Germany · doi:10.1007/978-3-030-30648-9_37
Ono, H., Tate, M., Oshige, T., & Iizuka, Y. (2024) · 鐵と鋼 : 日本鐡鋼協會々誌 · doi:10.2355/tetsutohagane.tetsu-2024-009
A study on Surface Flaw Detection using Deep Learning Approach
Shaikh, E. T. B., & Kokate, M. V. (2024) · Asia-Pacific Artificial Intelligence and Big Data Forum (AIBDF) · doi:10.1145/3718491.3718633
Wang, H., Meng, B., Zhu, J., & Du, R. (2025) · IEEE Transactions on Instrumentation and Measurement · doi:10.1109/tim.2025.3558829
“Currently, traditional defect detection methods are categorized into three main types: 1) statistical-based defect detection methods [17], [18], [19], [20]; 2) structure-based defect detection methods [21], [22], [23], [24]; and 3) model-based defect detection methods [25], [26], [27], [28].”
Guo, D., Sun, Q., & Zhao, Y. (2025) · Research Square · doi:10.21203/rs.3.rs-6556295/v1
Research on scratch defect detection method based on attention mechanism
Deng, W., & Wang, C. (2024) · doi:10.1145/3703935.3703942
Ono, H., Tate, M., Oshige, T., & Iizuka, Y. (2025) · ISIJ International · doi:10.2355/isijinternational.isijint-2025-136
A two-stage weakly supervised framework for endface defect detection in shaft metal parts
Liao, Y., Suo, X., Zhou, F., Liu, J., & Yin, S. (2026) · Journal of Intelligent Manufacturing · doi:10.1007/s10845-025-02785-0 · Cited by 1
Long‐Tailed Steel Surface Defect Classification Using a Multi‐Expert Ensemble Framework
Yang, D., & Zhou, L. (2026) · IET Image Processing · doi:10.1049/ipr2.70497
Metadata
- Authors
- Nand, G. K., Noopur, & Neogi, N.
- Affiliations
- Birla Institute of Technology, Mesra (IN)
- Venue
- 2014 Annual IEEE India Conference (INDICON)
- Publisher
- IEEE
- Published
- 2014-12
- Pages
- 1-6
- OpenAlex
- W2094158905
- Cited by
- 44
- References
- 14
- Citations by year
- 2026: 2 · 2025: 6 · 2024: 8 · 2023: 8 · 2022: 5 · 2021: 2 · 2020: 4 · 2019: 2 · 2018: 3 · 2017: 2 · 2016: 2
- FWCI
- 2.86
- Type
- conference paper
- Language
- en
- Open access
- closed
- Locations
- IEEE India Conference (publishedVersion)
- Topics
- Physical Sciences › Engineering › Industrial and Manufacturing Engineering › Industrial Vision Systems and Defect Detection
- Physical Sciences › Engineering › Mechanical Engineering › Non-Destructive Testing Techniques
- Physical Sciences › Engineering › Civil and Structural Engineering › Infrastructure Maintenance and Monitoring
- Keywords
- steel surface defect detection, image segmentation, local entropy, illumination compensation, background subtraction, histogram thresholding, scratch defects, quality assurance
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.